Crosley Furniture Harper CF6515 User manual

3

4
Please do not use tools to assemble this unit unless specifically indicated.
Step 1. Attach handle (part #6) to small drawer front panel (part K) using short screws
(part #1) and phillips head screwdriver. Insert small drawer panels (parts L & M)
into small drawer front panel (part K) and pull down to lock. Slide small drawer
bottom panel (part O) into grooves of assembled unit (parts K, L & M). Attach
small drawer back panel (part N) to assembled unit (parts L, M & O) using long
screws (part #3) and phillips head screwdriver. Repeat for remaining drawer.

5
Step 3. Attach back rail (part G) and bottom
panel (part F) to left panel (part B) and
left partition panel (part C) using
wood dowels (part #5) and lock
the hardware.
Step 2. Insert large drawer panels (parts Q & R) into large drawer front panel (part P)
and pull down to lock. Slide large drawer bottom panel (part T) into grooves
of assembled unit (parts P, Q & R). Attach large drawer back panel (part S)
to assembled unit (parts Q, R & T) using long screws (part #3) and phillips
head screwdriver. Attach handle (part #6) to large drawer front panel (part P)
using short screws (part #1) and phillips head screwdriver. Repeat for
remaining drawers.

6
Step 4. Attach bottom rail (part H) to assembled unit (parts B, C & F) using bolts (part #4)
and allen wrench (part #7).
Step 5. Carefully turn unit upright. Attach back panel (part J) to assembled unit
(parts B, C, G & F) using round head screws (part #2) and phillips head
screwdriver.

7
Step 6. Attach back rail (part G) and bottom panel (part F) to right panel (part D) and
right partition panel (part E) using wood dowels (part #5) and lock the
hardware.
Step 7. Attach bottom rail (part H) to assembled unit (parts D, E & F) using bolts (part #4)
and allen wrench (part #7).

8
Step 8. Carefully turn unit upright. Attach back panel (part J) to assembled unit
(parts D, E, G & F) using round head screws (part #2) and phillips head
screwdriver.
Step 9. Attach back cross bar (part I) to
partition panels (parts C & E) using
wood dowels (part #5) and lock
the hardware.

9
Step 10. Attach top panel (part A) to assembled units (parts B, C, D, E, & I) using wood
dowels (part #5) and lock the hardware.
Step 11. Slide assembled small drawers into place.

10
Step 12. Slide assembled large drawers into place and insert file hangers (part #8) into
the designed grooves.
NOTE: It is important to adjust levelers once fully assembled and upright.
Extend adjustable leveler until it's firmly in contact with the floor.
If relocating, adjust leveler as needed until it's firmly in contact with
the floor in new Iocation.