Crosley CR32D User manual

CR32D
Cathedral
Instruction Manual
Questions, problems, missing parts?
Before returning to the store, call Customer Service
8 a.m. –6 p.m., EST, Monday –Friday
1-888-CROSLEY
www.crosleyradio.com

English
2
Safety Instructions
Read and understand this entire manual before using this product. Keep these
instructions for future reference.
1. Do not use this product near water.
2. This product should be operated only by the type of power source indicated
on the marking label or in this instruction manual.
3. Do not defeat the safety purpose of the polarized plug. A polarized plug has
two blades with one blade wider than the other. This plug will fit into the
power outlet only one way. If you are unable to insert the plug fully into the
outlet try reversing the plug. If the plug should still fail to fit, contact your
electrician.
4. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the product.
5. Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or electric shock.
6. Never push objects of any kind into this product through openings as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the product.
7. Do not attempt to service this product yourself as opening or removing
covers may expose you to dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
8. Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
9. Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
10. A product and cart combination should be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the product and cart
combination to overturn.
11. Slots and openings in the cabinet are provided for ventilation and to ensure
reliable operation of the product and to protect it from overheating. Do not
block or cover these openings.
12. Unplug the product during lightning storm or when unused for long periods of
time.

English
3
Items in this package
Before throwing away any packaging materials, please check thoroughly and
make sure you find the following items that come along with this package:
Radio
Power adaptor
Please contact Crosley customer service if there is any accessory missing from
the package. Retain the original packaging materials for exchange or return
purposes.
Specifications
Frequency Range AM 520 - 1710 KHz
FM 87.5 –108.5 MHz
Power consumption 14W
Power Source AC-DC adapter 12V 1A
Speaker 3" 8Ω 3Wx2
Note:
Design and specifications are subject to change without notice.
To help save power consumption, some models will comply with ERP energy
saving standard. When there is no audio input for 20 minutes, their powers will
automatically cut-off. To turn power back on and resume playing, you will need to
turn off the power and turn it on again.

English
4
Product Description
1. Tuner Dial
2. On-Off Switch/Volume
Knob
3. Play/Pause Indicator
4. AM/FM Button
5. Headphone Jack
6. Play/Pause Button
7. Stop Button
8. Repeat Indicator
9. Repeat Button
10.CD Drawer
11.Program Button
12.Program Indicator
13.Backward Skip Button
14.Forward Skip Button
15.Open/Close Button
16.Function Switch
17.Tuning Knob
18.Speaker
19. Antenna
20. Power Jack

English
5
Initial Setup
Essential Setup
1. Place the unit on a flat and level surface. The selected location should be
stable and free from vibration.
2. Connect AC adaptor to the Power Jack of the unit.
3. Untie the FM Antenna and allow it to hang in a straight line.
Radio Operation
1. Turn the unit ON by turning the On-Off Switch/Volume Control clockwise to
the ON position.
2. Press the Function Switch to the Radio position.
3. Press the AM/FM Button to the desired radio band (AM or FM).
4. Turn the Tuning Knob to select the desired station on the Tuner Dial.
5. Adjust the volume to the desired listening level by turning the On-Off
Switch/Volume.
6. Turn the unit off by turning the On-Off Switch/Volume counterclockwise to the
off position.
Note:
The unit is equipped with a FM wire antenna. To FM improve reception, move the
wire around until the reception is clear without interferences. Do not connect the wire
to any additional antenna.
The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit
for better reception.
Bluetooth Operation
1. Turn the unit ON by turning the On-Off Switch/Volume Control clockwise to
the ON position.
2. Press the Function Switch to the Bluetooth mode, the Tuner Dial will light will
change to blue.
3. Turn on the Bluetooth feature of your audio device, search for “Crosley CR32”
and pair.
4. Play and stream music from your device to the unit.
Note:
Bluetooth version - 4.2

English
6
CD Playback Operation
1. Press the Function Switch to the CD position.
2. Press the Open/Close button to open the CD tray and put the CD in the tray
with the labeled side facing up.
3. Press the Open/Close button again to close the tray. The LED display will
show “--“ for a few seconds, then the total number of tracks on the CD. If it is
a blank CD or an unrecognizable CD, it will show “00”.
Note: MP3 or similar types of digital audio files can not be read by the CD player.
4. Press the Play/Pause button to start the playback. The Play Indicator will light
up.
5. During the playback, press the Play/Pause button to pause and the Play
Indicator will starting flashing. Press it again to resume playback.
6. To skip to the next or previous track, press the Forward Skip or Backward
Skip button correspondingly.
7. To search fast forward or backward a track, press and hold the Forward Skip
or Backward Skip button correspondingly until you reach the desired time.
Release the button and the playback will resume.
8. Press the Stop button if you want to completely stop playback.
Programmed Playback
1. Before starting the playback, press the Program button once to enter
program mode. Program Indicator will start flashing. The LED display will
flash “01” as the track sequence which is to be edited.
2. Press the Forward Skip or Backward Skip buttons to select the desired
track that you would like to play. The LED’s number will turn steady
instead of flashing, showing the sound track number at selection.
3. Press the Program button to confirm the selected track. The LED’s
number will start flashing again showing the next track sequence which is
to be edited.
4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.
The tracks can be in any number and repeated. A maximum of 20 tracks
can be programmed at one time.
5. Press Play/Pause button to start the programmed playback. The tracks
will play in the same sequence that you programmed earlier.
6. To exit the program mode, press the Stop button twice and the Program
Indicator will be off.

English
7
Troubleshooting
There is no power
Power adaptor is not connected correctly.
No power at the power outlet.
There is no sound
Function Knob is in the Bluetooth position
Make sure the volume is turned up.
CD does not play
Function mode is not set to CD.
The CD is blank.
The CD is placed on the tray incorrectly with the label side facing down.
The CD has unsupported digital audio files like MP3 and similar types of
format.
The CD has too many scratches or dirty.