CrowdDJ Nightlife User manual

Nightlife
Media Player
INSTALLATION GUIDE
SUPPORT.NIGHTLIFE.COM.AU
AUS: 1800 773 468 | NZL: 0800 111 960 | OTHER COUNTRIES: [phone]

2
SUPPORT.NIGHTLIFE.COM.AU
AUS: 1800 773 468 | NZL: 0800 111 960 | OTHER COUNTRIES: [phone]
Equipment List
The Nightlife Media Player comes fully equipped to play licensed music. Here is a list of the equipment that
comes in the box.
EQUIPMENT INSIDE THE BOX:
1 x Nightlife Media Player
Leads and Accessories
›Media Player power pack and lead
›3.5mm to 2RCA lead
›HDMI lead (per video output)
›Ethernet cable
›Wi-Fi Antennas
Conguration
(Depending on your Nightlife conguration)
›Wi-Fi Router with power pack and Ethernet cable
›Power board
›HDMI to Video Scan Converter with single RCA video lead and power
pack (per video output)
QUICK START
Dimensions:
165mm (width) x 55mm (height) x 155mm (length)
Suggested Clearance:
Side 50mm; Top 50mm; Rear 100mm
Rack Size:
2RU (3RU with clearance)
Weight:
1300g
Video Output:
Dual HDMI outputs (1920x1080p); Composite available with converter
Audio Output:
3.5mm to RCA; Embedded HDMI audio
Power:
Output: 19V 2.1A
Input: 100-240V 50/60Hz
MEDIA PLAYER SPECIFICATIONS
HDMI to Video
Scan Converter

3
SUPPORT.NIGHTLIFE.COM.AU
AUS: 1800 773 468 | NZL: 0800 111 960 | OTHER COUNTRIES: [phone]
Nightlife Media Player
Setup Overview
SPEAKERS
AUDIO ONLY OUTPUT 2OUTPUT 1 + AUDIO
SCREENS
10” or 22”
crowdDJ® KioskMMN Turntablet®
OPTIONAL HARDWARE
+ CONNECTIONS
VENUE AV DISTRIBUTION
VENUE
NETWORK
CONSUMER MOBILE DEVICE
Using crowdDJ®
MANAGER MOBILE DEVICE
Running Manage My Nightlife
LEGENDLEGEND
HDMI Lead Internet
Ethernet Cable
3.5mm to 2RCA Lead
AV CABLING
NETWORK
Wi-Fi
SUPPORT.NIGHTLIFE.COM.AU
AUS: 1800 773 468 | NZL: 0800 111 960 | OTHER COUNTRIES: [phone]
VENUE OR NIGHTLIFE
ROUTER
Nightlife Connectivity
The diagram below illustrates how the Media Player ts into your venue’s AV and network infrastructure.
QUICK START

4
SUPPORT.NIGHTLIFE.COM.AU
AUS: 1800 773 468 | NZL: 0800 111 960 | OTHER COUNTRIES: [phone]
QUICK START
Setup
Power
19V 2.1A Power Adaptor
connects here
Network
Network port for cabled internet
access
USB Ports
Wi-Fi
Wi-Fi antenna connection
Video 1 (HDMI-2)
Primary channel for music
video, ambient visuals and digital
advertising; Embedded HDMI audio
Video 2 (HDMI-1)
Secondary channel for ambient
visuals and digital advertising if
activated
Audio
3.5mm jack for audio output
Power
Press this button to turn on the
Media Player
1
2
3
4
5
6
7
8
REAR OF MEDIA PLAYER FRONT OF MEDIA PLAYER
21 3
83
5 6 7
4
1. FIND A SUITABLE LOCATION
If you don’t have an AV rack, pick an ideal location
where the Media Player can be installed – away from
heat or wet areas and close to your AV and network
infrastructure.
2. CONNECT AUDIO
Using RCA: Plug the 3.5mm to 2RCA cable into the
3.5mm port ( ) and connect the other end to your
venue’s audio distribution.
Using HDMI: Plug the HDMI cable into the HDMI-2 port
( ) and connect the other end to venue AV distribution.
3. CONNECT VIDEO
Plug the HDMI cable into the HDMI-2 port ( ) and
connect the other end to your video distribution setup.
Do the same for the HDMI-1 port ( ) if a second video
output is activated.
Utilise the HDMI to Video Scan Converter if required
for your venue AV distribution.
4. NETWORK & ROUTER
Using Router Connection: Plug the Ethernet cable
from your network source into the blue client Network
/ WAN port at the back of the Wi-Fi Router. With the
second Ethernet cable, connect the Router to the LAN-
1 port ( ).
Using Direct Connection: Plug the Ethernet cable from
your network source into the LAN-1 port ( ) and screw
provided Wi-Fi Antennas to the Media Player ( ).
Using Wi-Fi Connection: This method of connection
should be discussed with Nightlife prior to setup.
Screw the provided Wi-Fi antennas to the Media
Player ( ). The Wi-Fi connection should establish
once you power on your Media Player in Step 5.
5. CONNECT POWER
Plug the supplied Media Player power pack into the
power socket ( ) and connect the other end to a
power source. Turn on the Media Player by pressing
the power button ( ).
6. CHECK PLAYBACK
Wait up to 5 minutes for the system to boot up, then
check your TVs to ensure visuals are playing on your
screens, and listen to ensure your music is playing and
in sync with the visuals.
7. DOWNLOAD MANAGE MY NIGHTLIFE
Download the Manage My Nightlife app from the app
store. Open the app on your phone, sign in with your
credentials, check in to your music zone and ensure
you can hear the music playing.
Once you’ve completed these steps, give us a call to
continue onboarding with Nightlife.
2
8
1
5
5
6
7
4
4
2