CRY SOUND CRY2623M User manual

(Signature) July 13, Jason Cao, President
0
Declaration of «CE» Conformity
Table of Contents
Description
Page
CRY2623, CRY2620
1, 2
CRY2624
3, 4
CRY2623M
5, 6
Universal Battery Charger
7
Battery
8

(Signature) July 13, Jason Cao, President
1
Manufacturer’s EU Declaration of Conformity (conform to ISO/IEC 17050-1)
Manufacturer: HANGZHOU CRYSOUND ELECTRONICS CO.,LTD.
Address: No.10, Xianqiao Road, Zhongtai Street, Yuhang District, Hangzhou, Zhejiang, China
Declares, under its own responsibility that the CRYSOUND products:
CRY2620
Industrial Acoustic Imager
CRY2623
Industrial Acoustic Imager
are built in conformity with the following European Directives:
Directive
Title
2011/65/EU
Restriction of Hazardous Substances (RoHS)
2014/30/EU
Electromagnetic Compatibility Directive/Annex II (EMC)
Standards applied:
Norm
Title
IEC 62321-1:2013
Determination of certain substances in electrotechnical products - Part 1:
Introduction and overview
IEC 62321-2:2013
Determination of certain substances in electrotechnical products - Part 2:
Disassembly, disjunction and mechanical sample preparation
IEC 62321-3-1:2013
Determination of certain substances in electrotechnical products - Part 3-1:
Screening - Lead, mercury, cadmium, total chromium and total bromine using
X-ray fluorescence spectrometry
IEC 62321-3-2:2013
Determination of certain substances in electrotechnical products - 3-2: Screening -
Total bromine in polymers and electronics by Combustion - Ion Chromatography
IEC
62321-4:2013+AMD1:2017
CSV Determination of certain substances in electrotechnical products - Part 4:
Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and
ICP-MS
IEC 62321-5:2013
Determination of certain substances in electrotechnical products - Part 5:
Cadmium, lead and chromium in polymers and electronics and cadmium and lead
in metals by AAS, AFS, ICP-OES and ICP-MS
IEC 62321-6:2015
Determination of certain substances in electrotechnical products - Part 6:
Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas
chromatograhy -mass spectometry (GC-MS)
IEC 62321-7-1:2015
Determination of certain substances in electrotechnical products - Part 7-1:
Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colorless and
colored corrosion-protected coatings on metals by the colorimetric method
IEC 62321-7-2:2017
Determination of certain substances in electrotechnical products - Part 7-2:
Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in
polymers and electronics by the colorimetric method
IEC 62321-8:2017
Determination of certain substances in electrotechnical products - Part 8:
Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas
chromatography-mass spectrometry using a pyrolyzer/thermal desorption
accessory (Py-TD-GC-MS)
EN 61326-1-2021
Electrical equipment for measurement, control and laboratory use –EMC

(Signature) July 13, Jason Cao, President
2
requirements –Part 1: General requirements
EN 61000-4-2:2009
Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques -
Electrostatic discharge immunity test
EN 61000-4-3:2006 +
A1:2008 + A2:2010
Electromagnetic compatibility (EMC)
Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test

(Signature) July 13, Jason Cao, President
3
Manufacturer’s EU Declaration of Conformity (conform to ISO/IEC 17050-1)
Manufacturer: HANGZHOU CRYSOUND ELECTRONICS CO.,LTD.
Address: No.10, Xianqiao Road, Zhongtai Street, Yuhang District, Hangzhou, Zhejiang, China
Declares, under its own responsibility that the CRYSOUND products:
CRY2624
Industrial Acoustic Imager
are built in conformity with the following European Directives:
Directive
Title
2011/65/EU
Restriction of Hazardous Substances (RoHS)
2014/30/EU
Electromagnetic Compatibility Directive/Annex II (EMC)
2014/34/EU
ATEX directive
“EC type examination certificate N° TI22ATEX 570 X delivered by Technická
inšpekcia, a. s., as Notify Body No. 1354
Standards applied:
Norm
Title
IEC 62321-1:2013
Determination of certain substances in electrotechnical products - Part 1:
Introduction and overview
IEC 62321-2:2013
Determination of certain substances in electrotechnical products - Part 2:
Disassembly, disjunction and mechanical sample preparation
IEC 62321-3-1:2013
Determination of certain substances in electrotechnical products - Part 3-1:
Screening - Lead, mercury, cadmium, total chromium and total bromine using
X-ray fluorescence spectrometry
IEC 62321-3-2:2013
Determination of certain substances in electrotechnical products - 3-2: Screening -
Total bromine in polymers and electronics by Combustion - Ion Chromatography
IEC
62321-4:2013+AMD1:2017
CSV Determination of certain substances in electrotechnical products - Part 4:
Mercury in polymers, metals and electronics by CV-AAS, CV-AFS, ICP-OES and
ICP-MS
IEC 62321-5:2013
Determination of certain substances in electrotechnical products - Part 5:
Cadmium, lead and chromium in polymers and electronics and cadmium and lead
in metals by AAS, AFS, ICP-OES and ICP-MS
IEC 62321-6:2015
Determination of certain substances in electrotechnical products - Part 6:
Polybrominated biphenyls and polybrominated diphenyl ethers in polymers by gas
chromatograhy -mass spectometry (GC-MS)
IEC 62321-7-1:2015
Determination of certain substances in electrotechnical products - Part 7-1:
Hexavalent chromium - Presence of hexavalent chromium (Cr(VI)) in colorless and
colored corrosion-protected coatings on metals by the colorimetric method
IEC 62321-7-2:2017
Determination of certain substances in electrotechnical products - Part 7-2:
Hexavalent chromium - Determination of hexavalent chromium (Cr(VI)) in
polymers and electronics by the colorimetric method
IEC 62321-8:2017
Determination of certain substances in electrotechnical products - Part 8:
Phthalates in polymers by gas chromatography-mass spectrometry (GC-MS), gas
chromatography-mass spectrometry using a pyrolyzer/thermal desorption

(Signature) July 13, Jason Cao, President
4
accessory (Py-TD-GC-MS)
EN 61326-1-2021
Electrical equipment for measurement, control and laboratory use –EMC
requirements –Part 1: General requirements
EN 61000-4-2:2009
Electromagnetic compatibility (EMC) -
Part 4-2: Testing and measurement techniques -
Electrostatic discharge immunity test
EN 61000-4-3:2006 +
A1:2008 + A2:2010
Electromagnetic compatibility (EMC)
Part 4-3: Testing and measurement techniques -
Radiated, radio-frequency, electromagnetic field immunity test
EN 60079-0:
2018/AC:2020-02
Explosive atmospheres Part 0: Equipment – General requirements (IEC
60079-0:2017)
EN 60079-11: 2012
Explosive atmospheres –Part 11: Equipment protection by intrinsic safety "i"