Crystal SilentShake TR-01A User manual

Tube Revolver
DOMINIQUE DUTSCHER SAS

1
Index
Introduction
Cautions for Usage....................................1
Receiving and Inspection...............................2
Disposal and Recycling Information...................2
Features.............................................3
Specifications.........................................3
Panel Instruction....................................4
Operation Instructions..................................4
Rotisserie Installation....................................5
Maintenance..........................................6
Trouble Shooting..........................................7
Packing List..........................................7
Warranty Card.......................................8
.........................................1
Introduction
Thank you for choosing CTI's product. This product was designed to mix reagent,
solution, and other chemical substances for use in the research, medical science,
biological engineering, chemical science, and pharmaceuticals industries. The Crystal
SilentShaker series Tube Revolver is simple in appearance, and is constructed through
precise manufacturing and strict quality control for stable operation, precise control, and
reliable quality.
Before you use the unit, please read this entire manual carefully to understand how to
operate, and maintain. Your satisfaction with the unit will be increased if you take the
time to read about its safety and operational notices.
Keep this manual on-hand so it can be used by all operators of the unit. Be sure all
operators of the unit are given appropriate training before you put the unit in service.
Cautions for Usage
1. Be sure you follow any city, county, or other ordinances in your area regarding the use
of this unit.
2. Use only approved accessories. Do not modify system components. Any alterations or
modifications to your instrument may be dangerous and will void your warranty.
3. Do not modify the power cord provided with the unit. If the plug does not fit an outlet,
have a proper outlet installed by a qualified electrician.
4. Please only use the enclosed power supply adaptor to supply the unit.
.
.
5. Place the unit on level and sturdy surface to avoid vibration and noise
6. Do NOT top off tube to avoid splashing while stirring
7. DO NOT clean the unit with corrosive or flammable liquid.
8. Keep the unit stable at work.
9. Do not mix the flammable or any hazardous liquids.
DOMINIQUE DUTSCHER SAS

Upon delivery please inspect the package for visible exterior
damage, note and describe on the freight bill any damage found and enter
your claim on the form supplied by the carrier.
Inspect for concealed loss or damage on the unit itself，If any, the carrier will
arrange for official inspection to substantiate your claim. Save the shipping crate until
you are sure the unit has been delivered in good condition.
If for any reason you must return the unit, please contact your
distributors customer service department.
Make sure that all of the equipment indicated on the packing slip is
included with the unit. Carefully check all packaging materials before discarding.
Your satisfaction and safety require a complete understanding of this unit,
including its proper function and operational characteristics. Be sure operators
are given adequate training before attempting to put the instrument in
operation.
1.1 Inspection:
1.2
1.3 Return Shipment:
1.4 Accessories:
.
Receiving and Inspection
• Assortment of rotisseries included
• Selection of reciprocating or rotating operation mode
• Stepless speed
• LED indication of speed
• Manual rotating direction change
regulation
Features
Specifications
3
2
The symbol shown to the left indicates that this product shall not be
treated as household waste. In line with EU Directive 2012/19/EU
for waste electrical and electronic equipment (WEEE), this
electrical product must not be disposed of as unsorted municipal
waste. Please dispose of this product by returning it to the point of
sale or to your local municipal collection point for recycling.
Disposal and Recycling Information
10-40rpm
Available
Fixed
Rotating
84x0.5ml/0.8ml tubes, 60x1.5ml/2.0ml tubes,
28x5ml/7ml tubes,28x10ml/15ml tubes,
6x50ml tubes
22rpm
Keystroke
Unavailable
Rotating / Reciprocating
110V, 60Hz
10W
≤1kg
NA LED
100~240V
50/60Hz
≤0.8kg
4 ~℃60℃
26×14.8×19.5cm22.5×14.8×19.5cm
4W
TR-01A
( )HYQ-1130A
Tube Revolver with
Fixed Speed
Tube Revolver with Variable
Speed and Digital Display
220V, 50Hz
TR-01E
( )HYQ-2230E
TR-01EN
( )HYQ-2230EN
TR-01AU
( )HYQ-2230AU
TR-01SA
( )HYQ-2230SA
TR-02UA
( )HYQ-1131A
TR-02U
( )
W
HYQ-2231W
TR-02USA
( )HYQ-2231SA
Power Supply
Rotation Speed
Capacity
Speed Control
W×D×H
Indication
Ambient Temp.
Power
Weight
Product Name
Model
Normal-reverse
Rotation
Operation Mode
Plug
US
Eur.
UK
AU
SA
Power Supply
Plug
US
E-EN-AU
SA
Certifications CE, RoHS, WEEE CE, RoHS, WEEE, CSA
DOMINIQUE DUTSCHER SAS

1. Speed-up
2. Slow down
3.“ ” Selection of operation mode
4. LED To show the settings and working status
“ ”
“ ”
1.
2. Mount the tube rack on the rotisserie ax e
3. Place the O rings into the groove on the rotisserie
4. Load the tubes onto the tube rack and make sure them match perfectly
5. Turn on the
Note You can reverse rotation by pushing the rotisserie to the opposite direction
ml tube rack could be installed with or without the rotisserie
●Tube Revolver with Fixed Speed
Make sure the environment and power supply are correct, connect the power plug to
the outlet, and install the rotisserie axle.
.
axle.
, .
power switch.
: * .
**50 axle.
l
Panel Instruction
Mode
Operation Instruction
LED Display
5
●
1. Install the rotisserie with reference to “6. Rotisserie Installation”.
2. Mount the corresponding tube on the rotisserie.
3. Turn the power switch to “on”.
4. Switch the operation mode between “rotating” and “reciprocating” by pressing
“ ” button.
5. Set the speed by pressing “ ” “ ” button when it is on “rotating” mode.
Note:* 50ml tube rack could be installed with or without the rotisserie axle.
**LED shows “ ” on “reciprocating” mode; LED shows the last speed
setting value when it is on “rotating” mode.
Tube Revolver with Variable Speed and Digital Display
Mode
Rotisserie Installation
1. Hold the tube revolver housing firmly, insert one end of the rotisserie axle into
the slot, turn it until it clicks into place, and insert the other.
2. Mount the desired tube rack.
Rotisserie axle
4
DOMINIQUE DUTSCHER SAS

6
√
Revolving Rack
3. Place the O rings into the groove on the rotisserie axle.
4. Load the tubes onto the tube rack.
O Rings
Cleaning
For safe use please clean the tube as follows
• Unplug the power cord before cleaning
• Clean the unit by a soft dump cloth or a mild non corrosive ph W detergent
• Do not spray the unit
• Be sure that the unit is
, :
- ≤
completely dry before operation.
• Please wear gloves when cleaning
revolver
( 8)
Please follow the notes below for ensuring long-term usage:
1. Place the tubes steady in working condition.
2. To ensure Tube Revolver with Variable Speed and Digital Display optimal
performance, please reduce the load or keep the load balanced if there is any noise.
7
Error Cause
Power
connection is off
Rotisserie
Installation Error
Solution
Turn on the power switch or
connect the power cord to the
mains socket
Reinsert rotisserie into the cross
recess
Fuse Open Change Fuse
Unit does not start
Trouble Shooting
Packing List
Revolving Rack
TRA01(HYQF-8)
Description Model Qty Remark
Power adaptor
For Tube Revolver
with Variable Speed
and Digital Display
Machine
Operator's Manual
Rotisserie for 10ml/15ml tubes
Rotisserie for 5ml/7ml tubes
Rotisserie for 1.5ml/2ml tubes
Rotisserie axle
Rotisserie for 50ml tubes
Rotisserie for 0.5ml/0.8ml tubes
1
1
1
2
2
2
2
1
24V,1A
O Ring
1
NO.
For rotisserie xle a
For revolving rack
2
3
4
5
6
7
8
9
10
11
1
10
TRA02(HYQF-9)
TRA03(HYQF-10)
TRA04(HYQF-11)
TRA05(HYQF-12)
DOMINIQUE DUTSCHER SAS

8
Save this card carefully please. When you need service, contact the service company with card & invoice.
WARRANTY CARD
Warranty Card
User Name
Address
Zip Code
Product Name
Serial number
Telephone
E-mail
Model
Purchase Date
1.Warranty period is 24 Months from purchase date.
Warranty Scope:
Warranty is not valid under the following circumstances:
1. Warranty term is expired.
2. Damage due to improper use, maintenance or handling.
3. Unmatched serial numbers, or modification of serial numbers.
Customer service hotline: [phone]
User: the above information should be completed by the seller.
Maintenance records
Name of service
Address
Maintenance sheet number
Name of service
Address
Maintenance sheet number
Name of service
Address
Maintenance sheet number
Maintenance date
Telephone
Maintenance staff signature
Maintenance date
Telephone
Maintenance staff signature
Maintenance date
Telephone
Maintenance staff signature
First
Second
Third
The following should be completed by maintenance staff.
DOMINIQUE DUTSCHER SAS