CTA PAD-SSL User manual

Heavy Duty Security Station for Laptops
2. Package contents:
(1) Left Rack
(1) Left Clip
(2) Hand-Turn Screws
(1) Security Cable
(1) Right Rack
(1) Right Clip
(1) Push-in Lock
(2) Keys
(1) Set of Optional Mounting Screws
3. Operation Instructions:
A. Locking:
1. Loop the cable around an immovable object. (Figure 1)
2. Separate the left and right racks. (Figure 2)
3. Connect the right clip with the right rack and affix with Hand-Turn Screw. (Figure 3)
4. Connect the left clip with left rack and affix with Hand-Turn Screw. (Figure 4)
5. Attach cable loop to shaft. (Figure 5)
6. Connect racks together and place laptop inside. (Figure 6)
7. Push left rack in until the clamp clips around the laptop. (Figure 7)
8. Press lock in to lock. (Figure 8)
B: Unlocking
1. Insert key to unlock. (Figure 9)
2. Pull left rack out and remove laptop. (Figure 10)
Figure 1
Figure 2
Figure 3 Figure 4
圖三
1. Overview
PAD-SSL

4. Optional Mounting Kit
Install with this mounting bracket if you do not wish to use the security cable.
1. Use screws to attach bracket to desk or table top. (Figure 11)
2. Slide shaft through arcs of the bracket. (Figure 12 and 13)
3. See previous section for setup instructions.
Figure 5 Figure 6 Figure 7 Figure 8 Figure 9
Figure 10 Figure 11 Figure 13 Figure 12
[e-mail]