CUGGL 4 WHEEL DELUXE PUSHCHAIR User manual

IMPORTANT! KEEP THE INSTRUCTION FOR FURTHER REFERENCE 717/3514
Important-Please read the instruction fully before starting assembly
If you need help or have further question, call the Customer Helpline 03456 400 800
CUGGL 4 WHEEL DELUXE PUSHCHAIR
Suitable form birth to 36 months.

-1-
Important-Please read the instruction before assembly and keep it for further reference

Name of parts
-2-
Components If you need help or have further question,
call the Customer Helpline 03456 400 800
Please check if you have all the parts listed below before starting assembly
Bumper bar
Footfrest
Handle bar
Folding hook
Brake lever
Rear wheel
Front wheel
Canopy
Safety belt
Storage basket
Front wheels Bumper bar Rear wheels

-3-
Unfold frame:
Release the folding hook, open
the frame and take out the
bumper bar and wheels.
Open frame fully until a ‘click’ is
heard.
Lift up the stroller handle with
both hands until the stroller
frame is locked in the upright
position.
Assemble the bumper bar:
Insert the end of the bumper bar
into adaptor on each side of the
hinge.
Bumper Bar
Folding Hook

-4-
INSERT INSERT
INSERT
Rear Wheel
Hole
Press the button at the middle
of the rear wheel to install the
rear wheels.
Note: make sure it is fully
engaged after wheel
installation
Insert rear tube into the rear
wheel plastic house until hear
‘click’ sound.
NOTE: Pull on the rear wheel to
ensure that it is securely
attached to the stroller.
To remove, push release button
and pull wheel from hub.
Assemble the front wheel:
Press down the lock pin on the
front tube, insert the front tube
into the adaptor of the front
wheel until you hear the click
sound.
Caution: Make sure the wheels
are properly installed before
using the stroller.
Adjust the backrest:
As shown, one hand hold the
end of webbing strap, another
hand pinch the adjusting buckle
and pull it to move backrest to
desired position.
4
User Instructions
Press the button at
the middle of the rear
wheel to install or
disassemble the rear
wheel
Press this button
to insert wheel

-5-
The leg-rest on the stroller can
be adjusted to two positions.
Press the trigger on both side of
the leg-rest to adjust the
position of leg-rest.
Folding the Stroller
First, ensure canopy is closed
and basket is empty, pull the
locks on both sides of the
stroller to release the folding
mechanism. Press hand bar
downwards, once folded ensure
the folding lock is engaged.
WARNING! Always use the harness and ensure
it is correctly fitted securely while child is in the seat.
Slide the shoulder strap buckle
① into the housing of the waist
strap buckle ②.
Repeat for the other side. Insert
the completed buckle ③ into the
buckle housing ④ until it
engages securely in place.
Repeat for the opposite side.
To release buckle, press centre
button on buckle housing ④.
Attention: Adjust the
backrest to the flat position
before folding the stroller.
User Instructions
4

If you need help or have further question, call the Customer Helpline 03456 400 800