CUGGL CEDAR 836/4810 Owner's manual

Issue 1-27/04/18
CUGGL CEDAR FOLD DOWN PUSHCHAIR
836/4810
Age:0-36 months
Maximum user
Weight:15kg

Bumper bar x1
Thank you for choosing our product. Please always read all the instructions
provided carefully before use and remember, your child’s safety may be affected if
you do not follow these instructions.The stroller is suitable for child from 0-36
months. The maximum load of the pushchair is 15kg, never overload.
Pushchair was designed for one child.
Never leave your child unattended.
Always use the restraint system.
Make sure every locking devices is locked before use.
Hanging or putting things on the handle could damage the stability of
the pushchair.
Never use the bumper bar as a hand lift to lift the stroller and your
child in case any damage could happen.
Don not leave the pushchair at a slope.
The maximum capacity for shopping basket is 2kg.
Always use braking device when putting in or picking up the child.
Do not fold the stroller when the child is on the pushchair.
Do not detach the stroller and adjust any accessories when the child is
on the stroller.
Only replacement parts supplied or recommended by the
manufacturer/distributor shall be used.
To avoid injury ensure that our child is kept away when unfolding and
folding this product.
Do not let your child play with this product.
The parking device shall be engaged when placing and removing the
children.
This product is not suitable for running or skating.
The pushchair was designed to be used from birth, we recommend
use of the most reclined position for new born babies.
1
Raincover x1

canopy
2

folding lock
Release the folding lock, pull the
handle bar backwards until you
hear the “click”.
“click”
1. Slide front wheel brackets into
front legs until you hear a “click”
sound.
2. To remove the front wheels,
press the small button and pull
downwards.
3
Step 1 To unfold the stroller
Step 2 Front wheel assembly

Fit the rear wheels on the axle
until you hear a “click”.
To remove the rear wheels, press
the release button and pull the
wheels outwards.
4
Step 3 Rear wheel assembly
To assembly the bumper bars.
Push the ends of the bumper bars into
the slots on the chassis until they “click”
into place.
To remove the bars,push in the buttons
on both sides and pull the bars off.
Step 4 Bumper bar assembly

fixing lever fixing lever
1. The front wheels must be turned
in the straight forward position,
then push the fixing lever
downwards until the button locks
in place.
2. To release the wheels for free
swivel, push the fixing lever upwards.
To lock the rear wheel brakes.
1. Press the brake pedal down until
they “click” into the locked position.
Make sure the brake pedals are
pressed down completely.
2. Always set the brake pedal whenever
you park the stroller.
To unlock the rear wheel brakes.Lift the
brake pedal until they “click”into the
unlocked position.
5
To lock the front wheels
Use the brake

0-6
6+
NOTES:
The shoulder straps can be
adjusted to 2 positions, to adjust
the height of the shoulder strap
to a lower position, insert the
shoulder strap into the shoulder
belt slot.
Harness & Buckle:
To release the harness:
Press the buckles ① and pull
them ② apart.
To fasten the waist harness,insert
both buckle clips into each side
of the buckle until they "click”
into correct position.To adjust
the shoulder straps move the
slides as shown.
6
Use the safety belt

Pull the hood forward by the front rim
of the hood. For shade/weather
protection, the hood can be unzipped
further as shown.
7
Adjust the canopy
zipper

Squeeze the clasp on the back of the
seat unit and pull downwards. When
the seat unit has reached the
desired position, release the trigger.
To raise the seat unit, hold both
straps with one hand and push the
back of the seat unit with your other
hand.
8
Adjust backrest

To adjust the footrest, press the both
sides footrest adjust button and adjust
the footrest to the correct position.
Adjust footrest
Place the raincover over hood and
then cover the stroller.
Fasten the hook & loop straps
position on the A and B as picture
shows.
P.V.C Clean with a damp cloth.
In accordance with safety regulation,
only use when an adult is attending.
Do not leave your child under the
rain cover in sunny weather in cause
of overheating.
WARNING: Keep away from fire.
WARNING: Keep this plastic cover
away from children to avoid
suffocation.
TAKE EXTRA CARE IN WINDY
CONDITION.
Use the raincover
A
B
9

Make sure the seats are in the upright
position, the hood is retracted and the
brakes are engaged.
Slide the primary lock button (A) to
the side and then squeeze the
secondary lock button (B). Keep the
secondary lock button held in and
push up and forwards on the handle.
Fold all the way down until the
folding catch locks in place.
10
To fold the stroller
A
B

11
If you need help or have further question,call the Customer Helpline 03456 400 800
This pushchair has been designed to comply with the EN1888:2012.
Country of origin: China
Argos LTD,489-499 Avebury Boulevard, Central Milton Keynes, MK9 2NW
This pushchair was designed and manufactured with qualified materials and
craftsmanship.
Always use the safety harness.
Worn parts, torn materials or
stitching
Loose screws, bent or broken
frame part
Broken, damaged or missing
parts.
Fabric parts may be cleaned in
accordance with the fabric care
abels .Do not machine wash.
Seat: Sponge clean only
Canopy/Basket: Hand wash only.
Do not leave the stroller
exposed to heat i.e. by a radiator
or indirect sunlight.
If the stroller chassis parts have been
exposed to salt water we recommend
that they be rinsed down with fresh (sap)
water as soon as possible afterwards.
Do not fold or store the product while
wet and never store in a damp
environment as this can cause mildew to
form.
Should any of the above be evident do
not use and contact the
Helpline: 03456 400 800 for advice.