Cuisinart Easy Prep Pro FP8U User manual

Easy Prep Pro
FP8U / FP8SU

2
Congratulations on your purchase of the Cuisinart Easy Prep Pro.
For over 30 years Cuisinart’s aim has been to produce the very finest kitchen
equipment. All Cuisinart products are engineered for exceptionally long
life, and designed to be easy to use as well as to give excellent performance
day after day.
To learn more about our products and for recipe ideas, visit our website
www.cuisinart.co.uk

3
Contents
Product Control Guide ......................................................................... 4
Important Safety Cautions ................................................................. 5
Safety During Use ............................................................................... 7
Before First Use ................................................................................... 8
1 Selecting the Work Bowl............................................................... 8
2 Selecting the Blade/Disc ................................................................ 9
3 Setting Up the Food Processor
A Fitting and Removing the Large Work Bowl ................................................................. 10
B Fitting and Removing the Large Chopping/Mixing Blade .........................................10
C Fitting and Removing the Reversible Slicing and Grating/Shredding Discs..........11
D Setting Up the Small Work Bowl and Chopping/Mixing Blade...............................12
E Fitting and Removing the Work Bowl Cover .................................................................12
4 Machine Controls ......................................................................... 13
5 Machine Functions
A Chopping .................................................................................................................................14
B Mixing ...................................................................................................................................... 14
C Puréeing/Blending.................................................................................................................14
D Slicing.......................................................................................................................................15
E Grating/Shredding.................................................................................................................15
6 Cleaning &Maintenance ............................................................. 16
7 Troubleshooting ............................................................................ 17
UK Guarantee...................................................................................... 19
UK After Sales Service ....................................................................... 20
Wiring Instructions............................................................................. 21

4
Pusher Accessory
Large Chopping/
Mixing Blade
Medium Slicing &
Medium Grating/
Shredding Disc
Work Bowl Cover
Small Work Bowl (max 0.7L)
Large Work Bowl
(max 1.9L)
Fine Slicing &Fine
Grating/Shredding Disc
Product Control Guide
Feed Tube
Housing Base
Small Chopping/
Mixing Blade
Rubber Seal
Control Buttons

5
IMPORTANT SAFETY CAUTIONS
Carefully read all the instructions before using the appliance and
keep in a safe place for future reference.
Always follow these safety cautions when using this appliance to avoid
personal injury or damage to the appliance.
1. The appliance is not intended to be operated by means of external
timer or separate remote control system.
2. This appliance is not intended for use by persons with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
3. Children should always be supervised to ensure that they do not play
with this product.
4. This appliance shall not be used by children. Keep out of reach of
children during and after use.
5. Always inspect the appliance and appliance accessories before use for
noticeable signs of damage. Do not use if damaged, or if the appliance
has been dropped. In the event of damage, or if the appliance develops
a fault, contact the Cuisinart Customer Care Line (refer to “UK After
Sales Service section“ for further information).
6. Do not use the appliance if the lead is damaged. In the event of
lead damage, discontinue use immediately. If the lead is damaged it
must be replaced by the manufacturer. Return the appliance to the
Customer Care Centre (refer to ‘UK After Sales Service’ section for
further information). No repair must be attempted by the consumer.
7. Never pull the plug out of the mains socket by the lead.
8. Do not wrap the lead around the main body of the appliance during
or after use.
9. Always ensure the voltage to be used corresponds with the voltage on
the appliance; this is indicated on the bottom of the housing.

6
10. Always disconnect the appliance from the electrical supply if it is
left unattended and before assembling, disassembling or cleaning.
11. For indoor, domestic use only.
12. This product complies fully with all appropriate EU and UK legislation
and the standards relevant to this type and class of appliance. We
are an ISO9001:2015 certified company that continually evaluates
our Quality Management System performance. If you have any
queries regarding product safety and compliance, please contact
our Customer Services Department (see “U.K. After Sales Service”
section).
WARNING: Polythene bags over the product or packaging may
be dangerous. To avoid danger of suffocation, keep away from
babies and children. These bags are not toys.

7
Safety During Use
nHandle the blades and discs with extreme care, they are very sharp.
nNever place a blade or disc directly on the motor spindle of the
housing base. Always ensure the bowl is in place.
nBefore switching on the processor, ensure that the blade/disc is
locked into place on the the motor spindle (taking care to avoid the
sharp edges), and that the lid is correctly fitted. Do not force or block
the lid mechanism.
nAlways carefully insert the blade before adding the ingredients.
nTo grate or slice food always use the pusher provided. Never push
food in with your fingers or use other utensils.
nKeep hands, spatulas and other utensils away from moving blades or
discs whilst appliance is in operation. Only use the spatula once the
food processor motor has stopped.
nAlways wait for the blade / disc to stop before removing the pusher
or lid.
nDisconnect the appliance from the mains supply before cleaning or
removing it or any of the attachments.
nAlways remove the bowl from the motor base before very carefully
removing the blade / disc.
nNever leave the appliance unattended when switched on or plugged
in.
nAlways ensure the blades and discs have been thoroughly cleaned
after each use and have dried completely before storing.

8
Before First Use
Take care when unpacking the chopping/mixing blades and the reversible slicing/
grating discs. The blades are very sharp and could cause injury.
To avoid injury, ensure the raised finger grips on the plastic casing are used to remove the
blades from their plastic packaging and carefully remove cardboard and tape from the
reversible slicing/grating discs. Retain the plastic casings for safe storage.
Before using your Cuisinart Easy Prep Pro for the first time, wash the large and small
work bowls, work bowl cover, pusher accessory, chopping/mixing blades, and both slicing/
grating discs.
1. Selecting the Work Bowl
nThe Food Processor is supplied with two work bowls.
nThe large work bowl has a maximum capacity of 1.9L and can be used with the large
chopping/mixing blade and the two reversible slicing and grating/shredding discs.
nThe small work bowl has a maximum capacity of 0.7L and can be used with the small
chopping/mixing blade only. The seal on the inner bowl prevents any leakage into the
large work bowl, allowing you to use the small bowl without the need to wash up the
large bowl after use.
N.B. The large work bowl must always be fitted before the small work bowl can be set up
inside.
It will not always be possible to use the work bowls to their maximum capacity. The
amount of food/liquid you can process in the bowls will depend on the density of the
ingredients in the work bowl and the consistency of the desired end result. For example,
to achieve a consistent result when chopping or pureeing nuts, fruits, vegetables or meats
you may need to process in batches of 300-500g. If you are mixing dough which can be
very dense, you may need to process in batches of around 400g.
If you find that the motor is struggling or that the processing results are uneven, then
we would recommend that you reduce the amount of ingredients in the work bowl and
instead process in batches.
For liquid, we recommend that you do not fill the bowls above the Maximum Liquid Fill
markings on each bowl (900ml on the large work bowl and 300ml on the small work
bowl.) This is to avoid liquid spilling into the central spindle which may cause leakage.
N.B If you are processing very thin liquid such as water in the large bowl, you may need
to reduce the amount of liquid to around 600ml to avoid thin liquid escaping from the lid.

9
2. Selecting the Blade/Disc
For chopping, mixing, blending and puréeing use the chopping/mixing blades.
nThe large chopping/mixing blade can only be used with the large work bowl.
nThe small chopping/mixing blade can only be used with the small work bowl.
For slicing and grating/shredding use one of the reversible discs.
nUse one disc for fine slicing (2mm) and fine grating/shredding.
nUse the other disc for medium slicing (4mm) and medium grating/shredding.
Both discs are labelled accordingly.
Fine Slicing or Fine Grating/Shredding
Medium Slicing or Medium Grating/Shredding
Fine Slicing Fine Grating/Shredding
Medium Slicing Medium Grating/Shredding
FP-8FD
FINE SLICING
MADE IN CHINA
FABRIQUÉ EN CHINE
FP-8FD
FINE SHREDDING
MADE IN CHINA
FABRIQUÉ EN CHINE
FP-8MD
MEDIUM SLICING
MADE IN CHINA
FABRIQUÉ EN CHINE
FP-8MD
MEDIUM SHREDDING
MADE IN CHINA
FABRIQUÉ EN CHINE

10
3. Setting Up the Food Processor
A Fitting and Removing the Large Work Bowl
nPlace the food processor base on a dry, flat, sturdy surface.
nPlace the large work bowl over the motor spindle, ensuring that the handle of the bowl
is positioned to the right of the centre.
nTurn the work bowl in a clockwise direction until it locks into position on the housing
base.
nTo remove, grasp the handle and turn the work bowl anti-clockwise until it unlocks. Lift
up and away.
N.B. The work bowl may be stiff during the first few times of use.
B Fitting and Removing the Large Chopping/Mixing Blade
nSet up the large work bowl as directed in 3A.
nHolding the central plastic stem, carefully lift and place the large chopping blade over
the work bowl’s centre spindle. Push the blade down until it can go no further.
N.B. Always fit the blade in the bowl before adding ingredients.
nTo remove, hold the central plastic stem of the blade and lift up and away from the work
bowl’s centre spindle.
WARNING: Take great care when handling the blades; they are sharp and can cause
injury.
Large Chopping/Mixing Blade
Push down
Centre Spindle of Large
Work Bowl

11
C Fitting and Removing the Reversible Slicing &Grating/Shredding Discs
The reversible slicing and grating/shredding discs can only be used with the large
work bowl.
nSet up the large work bowl as directed in 3A.
nChoose the desired disc and place it on the motor spindle, ensuring the text for the
function you wish to use is facing upwards on the disc (see section 2 for your reference).
nSlowly twist until the disc and spindle grooves align; the disc will fall into place.
N.B. Never put either disc on the motor spindle until the work bowl is locked in place.
nTo remove, carefully lift the disc upwards and away from the motor spindle.
WARNING: Take great care when handling either disc; the slicing blades are sharp
and can cause injury.
Place disc on
motor spindle

12
D Setting Up the Small Work Bowl &Chopping/Mixing Blade
The small chopping/mixing blade can only be used with the small work bowl.
nSet up the large work bowl as directed in 3A.
nPlace the rubber seal around the circumference of the small bowl, ensuring the lip
of the band covers the top of the bowl. Make sure the seal is fitted correctly so that
contents do not spill over the edge into the large work bowl. This allows you to use both
bowls for separate tasks without the need for washing up in between.
nPlace the small work bowl onto the large work bowl’s centre spindle.
nHolding the central plastic stem, carefully lift and place the small chopping/mixing
blade over the large work bowl’s centre spindle. Gently push the blade down until it
can go no further.
N.B. Always put the blade in the bowl before adding ingredients.
nTo remove, hold the central plastic stem of the blade and lift up and away from the
centre spindle.
WARNING: Take great care when handling the blades; they are sharp and can cause
injury.
E Fitting and Removing the Work Bowl Cover
nPlace the work bowl cover on top of the work bowl, with the feed tube just to the right
of the centre. Turn clockwise to lock onto the work bowl, ensuring the feed tube aligns
with the handle of the large work bowl.
nAlign the pusher accessory with the feed tube opening on the work bowl cover and slide
down to the bottom.
nTo remove the cover, grasp the feed tube and slide anti-clockwise to unlock and lift
away.
Push
Down

13
4. Machine Controls
High and Low Control Buttons
nThe ‘HIGH’ or ‘LOW’ controls are buttons that allow the machine to run until ‘OFF’ is
selected.
nProperly assemble the machine.
nAdd ingredients to the work bowl, either through the feed tube or directly into the bowl.
Ensure the work bowl cover is correctly fitted.
nPress the ‘HIGH’ or ‘LOW’ button. The blue LED light will illuminate and the motor will
start.
nPress the ‘OFF’ button when finished.
WARNING: The unit has a built in safety mechanism which will automatically turn off the
motor if the work bowl cover is removed. If the ‘OFF’ button hasn’t been pressed, when the
work bowl cover is replaced, the motor will start up automatically. Simply press the ‘OFF’
button to stop the motor.
Pulse Button
The ‘PULSE’ control is a button that allows the machine to run only while it is being
pressed. This capability provides more accurate control of the duration and frequency of
processing. Unless otherwise specified, a ‘PULSE’ should be about one second.
With the machine properly assembled, ingredients in the work bowl and the work bowl
cover correctly fitted, press the ‘PULSE’ button repeatedly as needed. The blue LED High
light will illuminate upon activation. As you get used to using the processor you will get
to know which setting works best for the food you are using.

14
5. Machine Functions
A Chopping
nYou can use your machine for a wide range of chopping tasks, including chopping
meats, fish, fruits, vegetables, cheeses and nuts.
nSet up your chosen bowl and the appropriate mixing/chopping blade.
nFor raw ingredients: peel, core and/or remove seeds and pips. For best results ensure
that the pieces of food you add to the work bowl are approximately the same size, i.e.
2.5cm cubed.
nAdd ingredients and pulse food in 1-second increments to chop. For the finest chop,
either hold the ‘PULSE’ down or press ‘HIGH’ or ‘LOW’ to run the machine continuously.
Watch ingredients closely to achieve desired consistency and scrape the work bowl as
necessary.
nHigh speed is recommended for most chopping.
WARNING! Never try to process ingredients that are too hard to cut with a knife. You may
damage the blade or the appliance.
B Mixing
nYou can produce dips, dressings, sauces, cake mixture, bread dough, pastry and crumble
toppings.
nSet up your chosen bowl and the appropriate mixing/chopping blade.
nAdd ingredients to the selected work bowl and use the ‘PULSE’ function or ‘LOW’ speed
(recommended for making doughs and batters).
nWatch ingredients closely to achieve desired consistency and scrape the work bowl as
necessary.
nLiquids can be added through the feed tube while the machine is running.
C Puréeing/Blending
nSet up your chosen bowl and the appropriate mixing/chopping blade.
nIngredients should be cut into 2.5cm pieces; a smooth purée is best achieved when all
the pieces are of equal size.
nPulse to initially chop and then process ‘HIGH’ or ‘LOW’ until food is puréed/blended;
scrape the work bowl as necessary.
N.B. Do not use this method to purée cooked white potatoes. They develop a gluey texture
when processed with the metal blade.
nPurée solid ingredients and add any liquids slowly via the feed tube as required.

15
D Slicing
nUse the slicing discs for perfect 2mm or 4mm slices.
nSet up your chosen slicing disc with the large work bowl and fit the work bowl cover.
nTurn the machine onto ‘HIGH’.
nEnsure the pusher accessory is removed, then place the food into the feed tube. For best
results, always pack food evenly into the tube. Ingredients should fit snugly, but not so
tightly that it prevents the pusher accessory from moving.
nUsing the pusher accessory, slowly push the food down the feed tube until it makes
contact with the disc and is sliced.
N.B The position of the food in the feed tube will determine the shape and size of the
slices. For example, if you insert a whole carrot vertically you will get round slices. To
change the shape and size of the slices change the position of the food in the feed tube.
The type/texture of the food will dictate the amount of pressure required. Use light
pressure for soft foods, medium pressure for medium foods, and firm pressure for harder
foods. Always process with even pressure.
WARNING: Never put fingers into the feed tube; always use the pusher accessory
provided. If food becomes stuck, turn the machine off, unplug from the main electric
supply and dismantle the processor. Do not attempt to remove food whilst the disc
is in operation.
E Grating/Shredding
nUse the grating/shredding discs for fine or medium shredding/grating.
nSet up your chosen grating/shredding disc with the large work bowl and fit the work
bowl cover.
nTurn the machine onto ‘HIGH’.
nEnsure the pusher accessory is removed, then place the food into the feed tube. For best
results, always pack food evenly into the tube. Ingredients should fit snugly, but not so
tightly that it prevents the pusher accessory from moving.
nUsing the pusher accessory, slowly push the food down the feed tube until it makes
contact with the disc and is grated/shredded.
The type/texture of the food will dictate the amount of pressure required. Use light
pressure for soft foods, medium pressure for medium foods, and firm pressure for harder
foods. Always process with even pressure.
WARNING: Never put fingers into the feed tube; always use the pusher accessory
provided. If food becomes stuck, turn the machine off, unplug from the main electric
supply and dismantle the processor. Do not attempt to remove food whilst the disc
is in operation.

16
6. Cleaning &Maintenance
nWhen not in use, leave your food processor unplugged.
nKeep the blades and discs out of the reach of children.
nAll parts except the housing base are dishwasher safe. We recommend washing
them in the dishwasher on the top rack. Due to intense water heat, washing the
work bowl(s), cover and accessories on the bottom rack may cause damage over
time. Insert the work bowl(s) and pusher accessory upside down for drainage.
Take extra care when loading and unloading blades and discs in the dishwasher.
N.B Due to food staining, it is normal for the rubber seal to become discoloured over
time. We recommenced to remove, clean and replace the rubber seal on the small work
bowl after each use.
nTo simplify cleaning, rinse the work bowls, work bowl cover, pusher accessory and blade
or disc immediately after use so food won’t dry on them. If food lodges in the pusher
accessory, remove it by running water through it, or use a bottle brush.
nIf you wash the blade and discs by hand, do so carefully. When handling, use the plastic
stems. Avoid leaving them in soapy water where they may disappear from sight. To
clean the metal blade, fill the work bowl with soapy water, hold the blade by its plastic
stem and move it rapidly up and down on the centre spindle of the bowl.
nThe work bowls are made of SAN plastic. They should not be placed in a microwave
oven.
nDo not use abrasive cleaners on the housing base, simply wipe with a damp cloth and
dry thoroughly. Apply any cleaning agent to the cloth, not the base.
nIf the feet leave spots on the counter, spray them with a spot remover and wipe with
a damp sponge.
nIf any trace of the spot remains, repeat the procedure and wipe the area with a damp
sponge and non-abrasive cleaning product.
IMPORTANT: Never store any blade or disc on the motor spindle. No blade or disc should
be placed on the spindle except when the processor is about to be used.
MAINTENANCE: Any other servicing should be performed by an authorised service
representative.

17
7. Troubleshooting
Q The food is unevenly processed.
A: The ingredients should be cut evenly into 2.5cm pieces before processing.
A: Process in batches to avoid overloading.
Q: Slices are uneven or slanted.
A: Place evenly cut food, cut side down, into the feed tube. Apply even pressure on the
pusher accessory.
Q: Food falls over in feed tube.
A: Feed tube should be packed full and evenly for best results. Ingredients should fit
snugly, but not so tightly that it prevents the pusher accessory from moving.
Q: Some food remains on top of the disc.
A: It is normal for small pieces to remain; cut remaining bits by hand and add to processed
ingredients.
Q: The motor does not start.
A: There is a safety interlock to prevent the motor from starting if it is not properly
assembled. Make sure the work bowl(s) and work bowl cover are securely locked into
position. If the motor still will not start, check the power cord and outlet.
Q: The food processor shuts off during operation.
A: The cover may have become unlocked; check to make sure it is securely in position. A
safety protector in the motor prevents the motor from overheating, which is caused by
excessive strain. Press the ‘OFF’ control button and wait 20 to 30 minutes to allow the
food processor to cool off before resuming.
Q: Unable to lock the work bowl cover
A: Ensure the rubber seal is fully fitted to the small work bowl, making sure the lip of the
band is covering the bowl’s circumference and isn’t raised/loose at any point.
Q: The motor slowed down during operation.
A: This is normal as some heavier loads e.g slicing/shredding cheese may require the motor
to work harder. Simply reposition the food in the feed tube and try again.
A: Alternatively, the maximum load capacity may have been exceeded. Remove some of
the ingredients and continue processing.

18
Q: The food processor vibrated/moved around the countertop during processing.
A: This is normal as some heavier loads (e.g. slicing/ shredding cheese) may require the
motor to work harder.
A: Make sure the rubber feet at the bottom of the unit are clean and dry. Also make sure
that the maximum load capacity is not being exceeded.
Q: Liquid is leaking from the small bowl into the large work bowl beneath
A: Check that the rubber seal is correctly fitted on the small work bowl.
A: Check that the maximum liquid fill mark has not been exceeded. If you are processing
liquid above the maximum fill line then it is possible for liquid to leak down through the
central spindle.

19
UK Guarantee
The Conair Group Ltd, Unit 3 Waterfront Business Park, Fleet, GU51 3TW
This appliance is guaranteed for consumer use for 5 years and is only valid within the
United Kingdom.
This guarantee covers consumer use only i.e. defects occurring under normal use within
the home from date of purchase or date of delivery, whichever is later.
If the product develops a fault due to defects in materials or manufacture within 12
months from the date of purchase, to avoid delays and unnecessary inconvenience, where
possible please return the product to the point of purchase for an exchange.
If the product develops a fault due to defects in materials or manufacture after 12
months from the date of purchase, and within the guarantee period, Conair UK After Sales
Service will repair or replace the product.
Exclusions
This guarantee will no longer be valid meaning that The Conair Group Ltd will not be liable
to repair or replace your product where:
1. The appliance has been used on a voltage supply other than that which is marked on
the product, or advised within this instruction booklet
2. The appliance has been purchased from an unauthorised stockist*
3. The appliance is used for professional / non domestic usage
4. Repairs or alterations have been attempted by unauthorised persons
5. The failure of the appliance is a direct result of misuse
6. The failure is a result of not following the instructions for use
This guarantee does not cover any cosmetic damage due to misuse of the product nor any
damage to persons or property that occurs because of product misuse.
*unauthorised stockists include, but are not limited to online auction sites, private sellers
and those selling second hand goods, refurbished products etc
Please contact the Conair Customer Care Line on 03702 406902 (09:00 to 17:00 Monday to
Friday) or email [email protected] for further information on authorised stockists.
It is important to retain your proof of purchase. We recommend attaching your
receipt to this page.

20
Even where a refund may be applicable, no refund will be provided without a valid
receipt or proof of purchase, we will only be able to offer a repair or replacement
service. Please note this does not apply if the product was purchased directly from
The Conair Group Ltd.
Guarantees on replacement products run from the original purchase date or date of
delivery, whichever is later, and not from the date of replacement.
This guarantee is an additional benefit and does not affect your statutory rights as
a consumer.
If you have any queries regarding this guarantee please contact the Conair Customer
Care Line on 03702 406 902 (09:00 to 17:00 Monday to Friday) or email your enquiry to
[email protected]
UK After Sales Service
For further advice on using the appliance or should you need to return your product,
please contact the Conair Customer Care Line on 03702 406 902 (09:00 to 17:00 Monday
to Friday) or email your enquiry to [email protected]
Return address:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name and address details, together with a copy of
proof of purchase and details of the fault.
Please note this Instruction Booklet is not the guarantee.