Cuisinart GAS0256AS User manual

Deluxe Two Burner Gas Grill
Model GAS0256AS / GAS0256ASO
ASSEMBLY INSTRUCTIONS

1
ASSEMBLY INSTRUCTIONS:
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY
BEFORE ASSEMBLING OR OPERATING YOUR GRILL.
WE RECOMMEND TWO PEOPLE WORK TOGETHER WHEN ASSEMBLING THIS UNIT.
The following tools are required to assemble this Cuisinart 2 Burner Gas Grill:
• Phillips Screwdriver
Note: Most hardware is pre-attached to the grill. You may need to loosen some screws
partially while others may need to be removed in order to assemble parts. The screws that
you remove will be re-used so don’t misplace this hardware.
Extra screws are included in a small bag with the owners manual.
PARTS LIST:
1 Right Front Leg
1 Front Panel (3 parts)
1 Left Front Leg
2 Side Panels
1 Cart Base
1 Right Rear Leg
1 Left Rear Leg
2 Heat Tents
1 Tank Holder
1 Grease Tray
1 Grease Cup
2 Cooking Grates
1 Warming Rack
1 Right Side Table
1 Left Side Table
1 Grill Body
4 Casters
2 Right Side Table Brackets
2 Left Side Table Brackets
1
2
3
4
5
6
7
8
11
9
10
12
13
14
15
16
17
18
19

2
14
16
12
11
15
13
8
5
6
3
2
1
7
4
10
17
4
9
18
19

3
Step 1
• Remove 4 screws
• Attach FRONT
PANEL parts
• Install 4 screws
• Loosen 10 screws
• Attach FRONT
LEGS and
• Tighten 10 screws
on FRONT LEGS
and
Step 2
FRONT PANEL
2
3
1
2
1
NOTE: Before tightening keyhole
screws, make sure panels are aligned.
3
1 3
2
2

4
• Loosen 4 screws
• Attach SIDE
PANELS
• Tighten 4 screws
on SIDE
PANELS
• Remove 4 screws
from FRONT
LEGS and
Remove 2 screws
Step 3
Step 4
444
4
Remove 2 screws
31
31

5
• Remove 4 screws
from CART BASE
• Attach TANK
HOLDER to
CART BASE
with 4 screws
(Removed from
Step 5)
Step 5
Step 6
CART BASE
9
9
CART BASE
5
5
5
5

6
• Attach CART
BASE to
FRONT LEGS
and
• Tighten 4 screws
on CART BASE
(Removed from
Step 4)
• Remove 4 screws
from REAR LEGS
and
Tighten 4 screws
Step 7
Step 8
CART BASE
5
6
5
Back of Grill
Front of Grill
7
Remove 2 screws Remove 2 screws
6 7
5
1
1
3
3

Step 9
Step 10
7
• Loosen 4 screws
• Attach SIDE
PANELS to
REAR LEGS
and
• Tighten 4 screws
on SIDE
PANELS
4 4
4
4
CART BASE
5
• Attach CART
BASE to REAR
LEGS and
• Tighten 4 screws
(Removed from
Step 8)
5
6
6
7
7
6 7
67

• Lock CASTERS
• Attach CASTERS
to legs
Step 11
17
unlocked
locked
CASTERS
17
17
8
• Loosen 6 screws
on all 4 legs
• Rotate
FRONT CART
BRACKETS
upwards and
tighten screws
• Slide REAR
CART
BRACKETS
upwards and
tighten screws
Step 12
Front Legs
Rear Legs

GRILL BODY 16
16
9
• Set GRILL BODY
on cart (Use two
people)
Step 13
Step 14
• Remove 14 screws
Remove 14 screws