Cuisinart FR-15C Series Service manual

2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precau-
tions should always be followed, including the following:
1. READ ALL INSTRUCTIONS.
2. Always unplug unit from outlet when not in use,
before putting on or taking off parts and before
cleaning. To unplug, grasp plug and pull from
electrical outlet. Never pull cord. Allow to cool
before handling.
3. To protect against risk of electric shock, do not put
motor base, power cords and plugs in water or other
liquids.
4. This appliance is not intended for use by children
or by persons with reduced physical, sensory,
or mental capabilities, or lack of experience and
knowledge. Close supervision is necessary when
any appliance is used near children. Children should
be supervised to ensure that they do not play with
the appliance.
5. Do not operate any appliance with a damaged
cord or plug, after the appliance malfunctions,
or if appliance has been dropped or damaged in
any manner. Return the appliance to the nearest
authorized Cuisinart Service Facility for examination,
repair, and electrical or mechanical adjustment.
6. This machine can only be used with the original
base. The use of attachments not recommended
or sold by Cuisinart may cause fire, electric shock
or injury.
7. Do not let cord hang over edge of table or counter,
or touch hot surfaces.
8. Do not plug in or take out plug when your hands are wet.
9. Do not use outdoors.
10. The machine must be placed on a dry, smooth
surface. To avoid any danger, do not place in an
inclined or uneven place.
11. This machine is only used for heating milk or making
milk foam, do not use for processing any raw
material.
12. When adding milk to the machine, do not exceed
the maximum scale. If the milk is too full, it may
overflow from under the top cover, resulting in
scalding.

3
13. During the operation of the machine, do not remove
the top cover. If you need to open the lid, press
the power button to turn off the machine. Once
the machine is off and the stirring rod has stopped
rotating you can remove the lid. Caution - Milk will
be hot.
14. After using the machine, please turn off the switch,
cut off the power supply, and pull out the plug.
Wash the steel cup, mixing rod, mixing head and
top cover with clean water and dry them. Wipe the
surface of the main body with dry cloth. Once all
parts are dried, you can store all pieces in the
steel cup when not in use.
15. Do not immerse the base and main body into
water or any liquid.
16. Do not let water or a wet cloth come into contact
with the base or bottom of the machine.
17. Do not use steel wire ball, abrasive detergent,
and corrosive liquid to clean the machine.
18. Do not remove the rotating spring on the stirring
head, otherwise damage may be caused.
19. Ensure the stiring head is cleaned after each use
to ensure proper performance.
20. Do not try to repair the machine by yourself,
otherwise your warranty will be void.
21. This machine is only used for household.
22. Do not touch hot surfaces. Use handles or knobs.
23. Do not place on or near a hot gas or electric burner,
or in a heated oven.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY
GROUNDING INSTRUCTIONS
For your protection, the Cuisinart®Milk Frother is
supplied with a molded 3-prong grounding-type plug
and should be used in combination with a properly
connected grounding-type outlet as shown in the figure.

4
SPECIAL CORD SET
INSTRUCTIONS
A short power-supply cord is provided to reduce the
risks resulting from becoming entangled in or tripping
over a longer cord. Longer extension cords are available
and may be used if care is exercised in their use.
If a long extension cord is used, the marked electrical
rating of the extension cord should be at least as great
as the electrical rating of the appliance. If the
appliance is of the grounded type, the extension cord
should be a grounding 3-wire cord. The longer cord
should be arranged so that it will not drape over the
countertop or tabletop where it can be pulled on by
children or animals, or tripped over unintentionally.
This appliance is for 120 volts only and should not
be used with a converter. Failure to comply voids
the warranty.
BEFORE THE FIRST USE
Carefully unpack the unit and remove any packaging
and promotional labels in or on the milk frother.
Please clean the stainless steel cup and the stirrer
in advance. And assemble it in place.
CIRCUIT GROUNDING
CONDUCTOR
CONNECTED PROPERLY
GROUNDING PRONG

5
FEATURES
Button
Body
Base
Lid
COLD/HOT
MILK FOAM
STIRRER
WARM MILK
STIRRER
Stirrer
Stirring
head

6
OPERATING INSTRUCTIONS
Hot Milk Foam
1. Put the main body on a flat surface, put the milk
stirrer (with spring) into the cup, add 0.12 L milk
to the steel cup to the maximum scale of the steel
cup ( ), and put the lid on.
2. Plug in the machine. Press the button for 1 second
to start the machine. When the red light turns on
the machine will begin heating the milk and
frothing it. When the milk is done, the machine will
automatically turn off.
Cold Milk Foam
1. Put the main body on a flat surface, put the milk
stirrer (with spring) into the cup, add 0.12 L milk to
the steel cup to the maximum scale of
the steel cup ( ), and put the lid on.
2. Plug in the machine. Press the button for
3 second to start the machine. When the blue
light turns on the machine will begin frothing the
cold milk. When the milk is done, the machine will
automatically turn off.
Warm Milk
1. Put the main body on a flat surface, put the hot
milk stirrer (without spring) into the cup, add 0.25 L
milk to the steel cup to the maximum scale of the
steel cup ( ), and put the lid on.
2. Plug in the machine. Press the button for 1 second
to start the machine. When the red light turns on
the machine will begin to warm the milk. When the
milk is done, the machine will automatically turn off.
Button Description
1. When you press the button for 1 second the
red light will turn on and the machine will be
begin heating/frothing the milk.
2. When you press the button for 3 second the
blue light will turn on and the machine will be
begin frothing the cold milk.
3. To power off the machine, press the button
for 1 second and the machine will turn off.

7
CLEANING AND MAINTENANCE
Always make sure the appliance is unplugged before
to start cleaning it.
1. Rinse the steel cup mouth of the main body under
the tap, clean the inside and bottom, wipe the
outer surface of the main body with a dry cloth.
CAUTION: Never submerge the base, the power
cord or plugs in water or other liquids.
2. Remove the lid and mixing components
separately, wash them under the tap,
dry them, and store them in the steel cup.
3. Any service other than cleaning and normal
user maintenance should be performed by an
authorized Cuisinart Service Representative.
SPECIAL REMARKS
1. Milk is heated at 65°C, to ensure the perfect foam.
2. This machine can be used to both warm milk and
make hot milk foam. You will need to use the
corresponding stirring rod. If you want to make
the hot milk foam after warming the milk, please
ensure the steel cup has cooled before changing
the stirring rod.
TROUBLESHOOTING CHART
HOT MILK
FROTHING
COLD MILK
FROTHING
HOT MILK
WARMING
FILL LINE
STIRRER WITH
SPRING
WITH
SPRING
WITHOUT
SPRING

8
RECIPES
Espresso Macchiato
A simple spot of foam makes this drink a classic.
Makes 1 serving
3 tablespoon (45 ml) cold skim milk
1 shot espresso
1. With the frothing whisk in place, add the milk to
the tank. Cover and press the hot milk button.
2. Pour espresso into a demitasse cup.
3. When the frothing process is complete, use the
froth spoon to dollop the foam on top of the
espresso. Serve immediately.
Espresso Breve
American version of a latte –
substituting half & half for milk.
Makes 1 serving
¾ cup (175 ml) cold half & half
1 shot espresso
1. With the warming stirrer in place, add the half
& half to the tank. Cover and press the hot milk
button.
2. Pour espresso into a mug.
3. When the warming process is complete, pour the
cream into the espresso and serve immediately.
Cappuccino
A thick layer of foam and bit of milk let the boldness
of the coffee shine through in this popular drink.
Makes 1 serving
¼ cup (60 ml) cold skim milk
1 shot espresso
1. With the frothing whisk in place, add the milk to
the tank. Cover and press the hot milk button.
2. Pour espresso into a mug.
3. When the frothing process is complete, pour the
milk into the espresso, using a spoon to hold
back the foam. Top with 2 to 3 tablespoons
(30 ml - 45 ml) of the foam. Serve immediately.

9
Caffè Latte
Similar to a cappuccino, this drink contains
more milk, which makes it creamy.
Makes 1 serving
½ cup (125 ml) cold skim milk
1 shot espresso
1. With the frothing whisk in place, add the milk to
the tank. Cover and press the hot milk button.
2. Pour the espresso into a mug.
3. When the frothing process is complete, slowly
pour the milk into the espresso, using a spoon
to hold back the foam. Top with foam and serve
immediately.
Caffè Mocha
This ultra-rich drink makes
the perfect ending to any special meal.
Makes 1 serving
¼ cup (60 ml) cold skim milk
1 shot espresso
1 tablespoon (15 ml) chocolate syrup
2 tablespoons (30 ml) sweetened whipped
cream
1 teaspoon (5 ml) shaved bittersweet chocolate
or unsweetened cocoa powder (for garnish)
1. With the frothing whisk in place, add the milk to
the tank. Cover and press the hot milk button.
2. Pour the espresso and chocolate syrup into
a mug and stir to combine. When the frothing
process is complete, pour the milk into the mug,
using a spoon to hold back the foam.
3. Top with a dollop of the foam, whipped cream,
and garnish with chocolate. Serve immediately.

10
Iced Cappuccino
Cool down during the warmer months
with this refreshing drink.
Makes 1 serving
2 tablespoons (30 ml) cold skim milk
4 ice cubes
1 shot espresso, chilled
¹⁄³cup (75 ml) whole milk
1. With the frothing whisk in place, add the skim
milk to the tank. Cover and press the cold milk
button.
2. Put the ice cubes, espresso, and whole milk into
a glass. Stir to combine.
3. When the frothing process is complete, top the
drink with the foam. Serve immediately.
Hot Chocolate
Why wait for the snow?
Hot chocolate in an instant is perfect anytime.
Makes 1 serving
½ cup (125 ml) cold whole milk
1½ tablespoons (25 ml) chocolate syrup
1. With the warming stirrer in place, add the milk to
the tank. Cover and press the hot milk button.
2. Pour the syrup into a mug.
3. When the warming process is complete, pour
the milk into the mug and stir well to combine.
Serve immediately.
Flat White
Similar to a latte, this creamy espresso-based drink
was developed in Australia and New Zealand.
Makes 1 serving
½ cup (125 ml) cold skim milk
1 shot espresso
1. With the frothing whisk in place, add the milk to
the tank. Cover and press the hot milk button.
2. When the frothing process is complete, pour the
milk into a mug, using a spoon to hold back the
foam. Pour the espresso over the milk.