Culver Mobility D10 User manual

User’s Manual
D10A
D10
D10C

Thank you for choosing the D10 / D10A / D10C for your portable wheelchair transporta-
tion needs. It is important to read through this manual before operating your D10 / D10A /
D10C Power Wheelchair to become familiar with its features as well as its limitations and
safety information.
You will find the operation and care of your D10 / D10A / D10C Power Wheelchair simple
and easy.
Disclaimer: and partners cannot be held responsible for personal injury or
property damage resulting from the unsafe or improper operation or maintenance of
D10 / D10A / D10C wheelchair.
As part of our ongoing product improvement initiative, we reserve the right to change
specifications and design without notice. As a result, there may be minor differences be-
tween your D10 / D10A / D10C and accessories and the photos, illustration and instruction
in this manual.
INTRODUCTION
Dear Users,
Showroom & Office 1403 E Edinger Ave
Santa Ana, CA 92705
www.culvermobility.com
CULVER MOBILITY
Recommendation
Please play a attention to “Warning” shown in the content of this user’s manual to
protect you from any injury. Unable to follow “Notification”in this manual may
result in damage the wheelchair.

CONTENT
........................................................
Specification Diagram
Feature Of D10, D10A And D10C
..........................................................................
Precautions .......................................................................................................
Install Setup ......................................................................................................
Battery Setup (For D10A, D10C) ................................................................
Controller .............................................................................................................
Basic Operation ..............................................................................................
Charging Batteries ........................................................................................
Free Wheel Mode ..........................................................................................
Transporting D10 / D10A / D10C .............................................................
Trouble Shooting ............................................................................................
Diagnostics ........................................................................................................
Warranty ...............................................................................................................
Warranty Card ...................................................................................................
1
3
Specifications .......................................................................................... 2
Safe Operation ....................................................................................... 4-5
6
7-8
11
Backrest Angle For Model D10C................................................................ 10
12
9
12-14
15
15-16
17
18
19
20

1
FEATURE OF D10, D10A AND D10C
D10
D10C
D10A

2
SPECIFICATIONS
Model D10 / D10A / D10C
Aluminum alloy
950*645*1040 mm
645*360*810 mm
120 kgs
250W * 2 pcs brushless motors
24V 7AH * 2 pcs lithium battery
4 MPH
22 km
8” * 1.75” PU solid wheels
Max 8°
6-8 hours
530 mm
Front 510 mm/ back 490 mm
900 mm
25.6 kgs
28.4 kgs
Rear Drive
Electromagnetic Brake
510 mm
400 mm
12.5” * 2.25” PU solid wheels
Material
Unfold Size
Fold Size
Loading Capacity
Motor
Driving Range
Front Wheels
Rear Wheels
Climbing Slope
Charging Time
Width of Armrest
Seat Width
Seat Depth
Seat Height
Turning Radius
Net Weight without Battery
Net Weight with two Batteries
Drive Model
Braking System
Max Speed
Battery
Locate serial number
under push handle cushion
Seat back/
Push Handle
Backrest cushion
with storage bag
Shock absorption
springs
Fender
Rear wheel
Motors
Armrests
Controller
Controller knob
Controller wire harness
seat cushion
Foot rest
Front wheel
Battery
Controller
CPU

SPECIFICATION DIAGRAM
3
30.5"
18.5"
13.8"
Seat width
Armrest width
20"
38.4"
37"
12.5" 8"
15.7 "

4
SAFE OPERATION
This is the most important section of manual; how to safely operate the D10 / D10A /
D10C Wheelchair. Please review this section thoroughly.
General safety
Adjust the D10 / D10A / D10C Wheelchair to your personal comfort level as much as
possible.
Take your time to learn how the D10 / D10A / D10C Wheelchair works in a private
space before you begin operating around others.
Practice bending, reaching and transferring in and out of D10 / D10A / D10C Power
Wheelchair.
Always be aware of your surroundings.
If you are not sure the D10 / D10A / D10C can surpass an obstacle, try to find anoth-
er way around.
Make sure that electronic components such as the control panel, battery charge, and
other electronic controlled components avoid moisture. If these components encoun-
ter moisture, dry before use.
The D10 / D10A / D10C Wheelchair seat is designed for comfort, not specifically for
pressure relief; if you suffer from pressure sores, or if you are at risk that they will
occur, please consult your doctor.
Make sure the D10 / D10A / D10C Wheelchair is operating smoothly.
Check for any unusual noises, vibration, or a change in the ease of use; if you detect
a problem, get in touch with our service department.
Failing to maintain your D10 / D10A / D10C Wheelchair could increase the risk of
Before using your D10 / D10A / D10C Power Wheelchair
A.
B.
C.
D.
E.
F.
G.
(1)
(2)
(3)
Before sitting, make sure the D10 / D10A / D10C is switched off, this will ensure the
D10 / D10A / D10C will not move upon touching the joystick.
Make sure the footrest is down.
Once on board, make sure your feet are safely on the footrest.
Getting into the D10 / D10A / D10C Power Wheelchair
(1)
(2)
(3)
Be alert to the danger of motor vehicles on roads or in parking spaces.
At night or when it is hard to see, use reflective clothing and equipment.
The D10 / D10A / D10C is designed for use on firm, even surface such as concrete,
asphalt or indoor floor.
Do not operate the D10 / D10A / D10C Power Wheelchair in sand, loose soil or over
rough terrain, which could damage wheels,bearings, axles or motors, or loose fas-
teners.
Driving the D10 / D10A / D10C Power Wheelchair
(1)
(2)
(3)
(4)

5
PRECAUTIONS
SAFE OPERATION
Getting out of the D10 / D10A / D10C Power Wheelchair
CAUTION: OPERATE SAFELY
Do not operate the Fold Power Wheelchair D10 / D10A / D10C in water of any kind.
Do not operate the Fold Power Wheelchair D10 / D10A / D10C up or down staircase
or escalators.
Do turn off the Fold Power Wheelchair D10 / D10A / D10C when exiting the chair for
safety.
Do practice driving the D10 / D10A / D10C Portable Electric Wheelchair in a private,
enclosed area.
Do not operate the Fold Power Wheelchair D10 / D10A / D10C while on a moving
vehicle such as a bus.
Do not lean your body to reach out of the D10 / D10A / D10C, causing a balance
issue.
Do not exceed the weight limited total of 120kg for rider plus any items.
Please do not drive the wheelchair on public road and make sure have safety belt
buckled before operation.
Make sure to bring the D10 / D10A / D10C Power Wheelchair to a complete stop.
Turn off the D10 / D10A / D10C Power Wheelchair to avoid accidentally opening the
joystick and moving the wheelchair.
Raise the armrest so that you can conveniently exit the wheelchair.
Carefully and safely get out of the seat.
Never exceed a total weight of 120kg, total for the rider plus items carried.
Exceeding the weight limited is likely to damage the seat, frame or fasteners and
may cause severe injury to you or others.
Weight limited-Do not exceed or the warranty will be void
(1)
(2)
Never sit in the D10 / D10A / D10C Power Wheelchair while in a moving vehicle; an
accident or sudden stop may cause you to be thrown from the wheelchair.
Never transport the D10 / D10A / D10C Power Wheelchair in the front seat of a vehi-
cle as it may move and interfere with the driver.
Always secure the D10 / D10A / D10C Power Wheelchair so that it cannot roll or shift
when being transported in a vehicle.
The D10 / D10A / D10C Power Wheelchair is NOT approved to be used with any tie
down system, which is generally used to transport a seated user in a powered
wheelchair in a motor vehicle.
When transporting the Fold Power Wheelchair D10 / D10A / D10C
(1)
(2)
(3)
(4)
(1)
(2)
(3)
(4)

6
PRECAUTIONS
It is important to perform regular maintenance of your D10 / D10A / D10C Power Wheel-
chair for longevity and warranty eligibility. Even a little cleaning now and again will go a long
way to keep your device looking and functioning like new.
Certified repair shops with trained professionals who specialize in electric wheelchairs
and scooters will be qualified to perform the service and maintenance on your D10 / D10A /
D10C Power Wheelchair.
We recommend you inspect your D10 / D10A / D10C Power Wheelchair two or three
times per year in the following areas:
Replacement parts and more major maintenance issues should be done by a professional.
Batteries are special lithium batteries designed specifically for use in the D10 / D10A
/ D10C Power Wheelchair.
Read all battery instructions before attempting to change or charge batteries.
When you don’ t use the D10 / D10A / D10C wheelchair for long periods of time,
please charge the battery every month to avoid the battery being damaged.
Many of the screws, bolts and nuts on the D10 / D10A / D10C are special high-strength
fasteners. Replacing these fasteners with non-approved parts may cause your D10 /
D10A / D10C Power Wheelchair to result in faulty operation and may cause harm to you
or other people, therefore:
A.Use fasteners that have been supplied by Culver.
B.Using the correct tools, tighten any fasteners that become loose as soon as possible.
Batteries
(1)
(2)
(3)
Fasteners
Never use non-D10 / D10A / D10C Power Wheelchair parts or make changes unless au-
thorized in writing by representative from our company. Doing so will void the warranty
and may create a safety hazard.
Change and Adjustments
(1)
(2)
(3)
Frame: Tighten loose screws as necessary D10 / D10A / D10C Power Wheelchair.
Wheels: Make sure they rotate easily. Significant resistance may require new bearings.
Armrest: Look for excessive wear or if they are loose.

7
INSTALL SETUP
Your D10 / D10A / D10C Power Wheelchair will arrive carefully packaged in a cardboard box.
Open the top of the box then turn the box on the side for easier pulling out the chair and
contents.
Total components as bellow:
1.
2.
To expand the D10 / D10A / D10C, grasp the push bar and pull up while holding down
on the seat to expand the chair and complete the assembly:
Hold down seat to expand
Grasp push bar
3.
Lithiun battery * 2 pcs
Chair, main assembly Charger with power cables Seat cushion
Safe belt
Battery direct charge
tranfer cable
Battery serial
connection cable
Tools