CUMMINS ALLISON JetSort 1000 series Installation manual

Coin Packaging
JetSort
®1000 Series
Setup and Operating I
nstructions

2 | JetSort®1000 series | JetSort® 1000 Series Coin Packaging Instructions
JetSort®1000 Series Coin Packaging Instructions
Setup
The packaging option allows JetSort®to dispense coin limits into preformed tubes and wrappers. Packaging must
be selected in setup to be available to the operator. To access and set up JetSort features, Batch Ended must
appear on the display screen.
R&C $
.00
Batch Ended
1. Press and hold the red STOP key 5–10 seconds, or until the following screen appears:
PRESS <BAT> SETUP
PRESS <SBAT> DIAGS
The chart below is a quick reference to navigating through JetSort setup screens using the keypad.
Key Names
Function Description
Start S/Bat
Scroll Forward:
With cursor on top line, scrolls forward through menu screens.
With cursor on bottom line, scrolls forward through selection options.
Start Batch
Scroll Backward:
With cursor on top line, scrolls backward through menu screens.
With cursor on bottom line, scrolls backward through selection options.
Print
Next Line: moves cursor from top to bottom menu line and vice versa.
Totals
Option Forward Key: scrolls through menu options so user can make or change a selection
Denom
Option Backward Key – scrolls through menu options so user can make or change a selection
Clear
Exit setup mode.
2. Press Start Batch. The first setup menu screen appears.
Do not select
PRESS <SBAT> DIAGS
(Diagnostics) unless instructed to do so by Cummins Allison.
Setup menu screens vary according to model number, software revision and installed upgrades.
To set or change a programmed feature, press
Start S/Bat
to scroll through menu selections until the desired setup
menu is reached. To exit setup, press
Clear
.

JetSort® 1000 Series Coin Packaging Instructions | JetSort®1000 series | 3
3. Press Start S/Bat repeatedly to scroll through menu screens until you see the Packaging? screen shown
below. The default setting is Off.
Packaging?
Off
4. Press Print, then Denom or Totals to scroll through the two packaging options.
Packaging?
Pkg only
Packaging?
Pkg & Sort
Packaging Options
Description
Pkg only Package all denominations simultaneously. Denomination limits are set automatically to
rolled-coin limits.
Pkg & Sort Selects the denomination of coin(s) to be placed in coin tubes. Automatically sets to rolled-
coin limits. All other denominations are sorted to limits set previously.
Pkg & Sort – Setup is complete. Press Clear to return to a Batch Ended screen.
Pkg Only – Continue with instructions.
5. Press Print, then Start S/Bat to continue to the next option
The next option menu is Pkg Add DayT? When selected, this option automatically adds the packaged coins to the
day total. The default setting is No.
Pkg Add DayT?
No
6. To change to Yes, press Print to select, then Totals or Denom. When Yes appears, setup is complete.
7. Press Clear to return to a Batch Ended screen.
Packaging
Pkg only
Package all denominations simultaneously. Denomination limits are set automatically to rolled-coin limits.

4 | JetSort®1000 series | JetSort® 1000 Series Coin Packaging Instructions
All container totals are cleared when changing to package mode. Record container totals if
needed before proceeding.
1. Press and hold End key for 5–10 seconds or until the following screen appears:
Norm Pkg
Pkg only must be selected in setup for the Norm/Pkg screen to appear when End is held. If the
screen does not appear, return to setup and retrace the steps to select a packaging option.
2. Press Start S/Bat to select Pkg (until cursor appears under "P" as shown above).
3. Press Clear to return to a Batch Ended screen.
4. Remove the coin box/bag under all denomination(s) to be packaged.
5. If using packaging kit, insert now with the paper wrapper properly fitted inside the denomination tube.
•If using preformed coin-packaging tubes, insert the paper wrapper into the plastic tube until there is some
resistance.
•If using flat coin packaging wrappers, first shape the paper wrapper - then insert the wrapper halfway into
the plastic tube. This ensures that coins fall properly into the paper wrapper.
6. Pour coin into hopper. Press Start Batch to begin packaging.
There is a one- to two-second delay before the last coin drops into the wrapper. Do not remove
the wrapper until the sort disk rotates the final coin into the tube.
7. When limit is reached for the packaged denomination, replace coin tube. Press Clear.
1c
50
LIMIT
1c
8. Press Clear again to continue processing coin (denomination may vary from illustration).
1c
0
CLEAR THIS ROLL?

JetSort® 1000 Series Coin Packaging Instructions | JetSort®1000 series | 5
9. Press CONT to continue packaging.
10. When finished, press End key to end batch. Remove all packaging devices. Reposition coin box(es)/bag(s).
11. Hold End for 5–10 seconds to return JetSort to normal operation.
Norm Pkg
12. Press Start S/Bat to select Norm (until cursor appears under "N" as shown above).
13. Press Clear to return to a Batch Ended screen. Resume normal processing.
Pkg & Sort
Select the denomination of coin(s) to be placed in coin tubes. Automatically sets to rolled-coin limits. All other
denominations are sorted to limits set previously.
All container totals are cleared when switching to package mode. Record container totals as
needed before proceeding.
1. Press and hold End key for 5–10 seconds or until the following screen appears:
Norm PkSrt
Pkg & Sort must be selected in setup for the Norm PkSrt screen to appear when End is held.
Return to setup and retrace the steps to select a packaging option.
2. Press Start S/Bat to select PkSrt (until cursor appears under "P" as shown above).
3. Press Clear to display the denomination screen.
1c
5c
10c
Pkg
Off
Off
Denominations set to Off are sorted to the appropriate box/bag. To specify one or more coin sets for packaging:
4. Press Start Batch until the cursor appears below the desired denomination.
5. Press Totals or Denom to set the feature to Pkg or Off.

6 | JetSort®1000 series | JetSort® 1000 Series Coin Packaging Instructions
6. Continue to press Start Batch to display the next denomination screen. Follow steps 4. and 5. above.
25c
50c
$1
Off
Off
Off
7. Press Clear to return to a Batch Ended screen.
8. Remove the coin box/bag under the denomination(s) specified for packaging.
9. If using packaging kit, insert now with the paper wrapper properly fitted inside the denomination tube.
•If using preformed coin-packaging tubes, insert the paper wrapper into the plastic tube until there is some
resistance.
•If using flat coin packaging wrappers, first shape the paper wrapper - then insert the wrapper halfway into
the plastic tube. This ensures that coins fall properly into the paper wrapper.
10. Pour coin into hopper. Press Start Batch to begin packaging.
There is a one- to two-second delay before the last coin drops into the wrapper. Do not remove
the wrapper until the sort disk rotates the final coin into the tube.
11. When limit is reached, replace coin tube. Press Clear.
1c
50
LIMIT
1c
12. Press Clear again to continue processing coin (denomination/text varies according to settings).
1c
0
CLEAR THIS ROLL?
13. Press CONT to continue packaging.
14. When finished, press End key to end batch. Remove all packaging devices. Reposition coin box(es)/bag(s).
15. Hold End for 5–10 seconds to return JetSort to normal operation.
Norm PkSrt

JetSort® 1000 Series Coin Packaging Instructions | JetSort®1000 series | 7
16. Press Start S/Bat to select Norm.
Press Clear to return to a Batch Ended screen. Resume normal processing.
Clear Incomplete Roll
1. From Batch Ended screen, press Totals until the CONTAINER screen appears.
Coin $
.00
CONTAINER
TOTAL
2. Press Clear. Screen text may vary (i.e., CLEAR ALL BOXES).
Coin
0
CLEAR ALL ROLLS?
3. Press Clear a second time to clear container totals and return to Batch Ended screen.
For foot-pedal setup, consult JetScan 1000 Operating Instructions or CA representative for
assistance.

852 Feehanville Drive
Mt. Prospect, IL 60056
800 786 5528
cumminsallison.com
© 201
6 Cummins-Allison Corp. All rights reserved.
All trademarks remain the property of their resp
ective owners.
I
nformation is subject to correction or change without prior notice.
This manual contains proprietary information of Cummins
Allison. It is intended solely for the information and use of parties authorized by Cummins Allison to maintain the
equipment described herein. Such proprietary information may not be used, reproduced, or disclosed to any other parties for a
ny other purpose without express written
permission of Cummins Allison. 022-1932-00 REV. B