CUMMINS ALLISON JetSort 1000 series Manual

800 786 5528
Page 1 of 2
cumminsallison.com
JetSort cleaning procedures
Daily cleaning of JetSort machines is recommended to ensure maximum productivity and reliability.
Recommended Cleaning Materials
Simple Green, the recommended cleaning agent, can be an eye irritant. Avoid eye
contact. If eye contact occurs, flush eye(s) with cool water for 5 minutes – remove
contact lenses if present – continue flushing eye (s) with cool water for 15 more
minutes. If irritation persists, consult physician.
Individuals with sensitive skin should rinse hands after using.
■ Simple Green Safety Towels. (Part number: 022-2118-00.) A pre-moistened microfiber towel also may be used. If using
Simple Green concentrate, dilute to: 30 ml of Simple Green per 240 ml of water. For material-safety-data sheets, see
simplegreen.com.
■ Microfiber towels. (Part number: 022-2223-00.)
■ Vacuum cleaner. (In the United States: Order standard vacuum part number 022-1959-00 or heavy-duty vacuum part
number 022-1308-00. Outside of the United States: Buy vacuum locally.)
Daily Cleaning
Clean sorting chamber of at least once a week to remove accumulated coin dust and debris.
1. Remove the coin tray.
2. Remove any stray coins or other objects from the inside of the machine by hand.
3. Use vacuum to remove accumulated dust or debris from interior areas.

800 786 5528
Page 2 of 2
cumminsallison.com
Inspect the sort disk and pad daily for best machine performance. Never wipe sort disk or pad, except as
instructed in this document.
1. Raise and inspect the sort disk for debris and remove by hand.
2. Clean disk if needed using dry microfiber towel, a clean cotton cloth, or a soft, non-metallic brush.
3. If necessary, use a stiff, non-metallic brush to clean the grooves on the underside of the top disk.
4. Inspect sort pad for any cuts that may affect the sorter's accuracy. Replace pad if needed.
Replacement sort pads are available from your Local Cummins Allison branch office.
5. Replace the sort head and secure the latch.
6. Reinstall coin tray and secure in place.
7. Clean remaining exterior surfaces as needed with a Simple Green Safety Towel.