Cuppone SILEA 20 User manual

SILEA 20
SILEA 30
Silea
MIXER
Use and maintenance manual

2
Contents
We congratulate you for choosing a product designed and
manufactured with cutting-edge technology.
This manual will provide you with all the information on Silea
range mixers.
The product is checked and tested in the Manufacturer’s plant
before being delivered to the customer.
The “production process check sheet” enclosed with it
guarantees that each step in the production process, from
assembly to packaging, was carefully checked from both the
operating and safety standpoints.
Before the installation, read the content of this manual
carefully: it contains important information regarding
product assembly and safety regulations.
Technical service
Your Dealer can solve any technical problem regarding use
and maintenance.
Do not hesitate to contact him in case of doubt.
Introduction
Introduction................................................................. 2
Technical service.........................................................................................2
Safety instructions ...................................................... 4
Symbols applied to the machine.....................................................4
Basic notions................................................................ 5
Knowing the appliance..........................................................................5
Use ................................................................................ 6
Powering the appliance .......................................................................6
Processing.......................................................................................................6
Maintenance and cleaning ......................................... 7
Warnings..........................................................................................................7
Cleaning the appliance..........................................................................7
Downtime for prolonged periods ...................................................7
Disposing of food residues ..................................................................7
Disposal at end of life..............................................................................8
Warranty....................................................................... 9
Something is not working........................................... 10
What to do in case of any malfunction........................................10
The foundation
Our company was founded in 1963 by the Lorenzo, Luigi and
Paolo Cuppone brothers. It immediately specialized in the
production of ovens and equipment to prepare and cook
pizza. The constant research and experimentation of new
equipment that are even now the strength of our company,
have led us to design and patent the machinery and ovens
that have revolutionized the way pizza is made.
CUPPONE 1963
Cuppone F.lli S.r.l.
Via Sile, 36
31057 Silea (TV) - ITALY
T [phone]
F [phone]
[e-mail] - www.cuppone.com

3
Contents
•Read this guide carefully before using and
maintaining the appliance, and keep it with
care in an accessible place for any future
consultation by the various operators.
• Moreover, the manual must always accompany
the product through its life, even in case of
transfer.
• Before performing any maintenance, disconnect
the electricity supply.
• Unauthorised actions, tampering or modifications
that do not follow the information provided in
this manual can cause damages, injuries or fatal
accidents and null and void the warranty.
• Use or maintenance that fail to comply with the
instructions in this manual may cause damage,
injury or fatal accidents.
• The serial plate provides important technical
information. This is vital in case of a request for
maintenance or repair of the equipment: please
do not remove, damage or modify it.
• The equipment is a spiral mixer, designed to mix
doughs for pizzerias, bakeries or pastry shops.
• These appliances are intended to be used
for commercial applications, for example in
restaurant kitchens, canteens, hospitals and
commercial companies such as bakeries,
butcher shops, etc., but not for the continuous
and mass production of food. A use other
than the stated one is considered improper,
potentially dangerous for people and animals
and might permanently damage the appliance.
The improper use of the equipment shall void
the warranty.
• This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities or
lack of experience and knowledge if they have
been given supervision and instruction concern-
ing use of the appliance in a safe way and un-
derstand the hazard involved. Children must not
play with the appliance. Cleaning and user main-
tenance shall not be made by children without
supervision.
• The staff using the appliance must be
professionally prepared and periodically trained
on its use, as well as the safety and accident
prevention regulations.
• Children must be supervised to make sure they
do not play with the appliance or parts of it.
•FIRE RISK: leave the area around the appliance
free and clean from fuels. Do not store
flammable materials near this appliance.
• WARNING: RISK OF EXPLOSION! It is forbidden
to use the product in environments at risk of
explosion.
• WARNING: always switch off the main switch
when you finish using the appliance, above
all during cleaning or in cases of prolonged
downtime.
• If you notice any anomaly (e.g. damaged power
cable, etc.), malfunction or fault, do not use
the appliance and contact a Service Centre
authorized by the Retailer. Demand original
spare parts, or the Warranty will be null and void.
• To avoid risks, if the power cable is damaged,
Safety instructions
it must be replaced by a Service Centre, the
Retailer, its service agent or qualified personnel.
•Place the emergency phone numbers in a
visible location.
•Monitor the equipment throughout its
operation.
• Failure to follow these regulations may cause
damage or even fatal injury, subsequently
invalidating the guarantee and relieving the
Manufacturer of all liability.
•We recommend you have the appliance
checked by an Authorized Service Centre at
least once a year.
Ed. 0121 - 70702582 REV01 Silea - Use and maintenance

4
Safety instructions
The company cannot be held liable for any print or
transcription errors, reserving the right to make changes
where deemed suitable without prior notice.
Partial reproduction without the Manufacturer's consent
is prohibited. Measurements are purely indicative and not
binding.
The original language used to prepare this manual is English:
the Manufacturer is not responsible for any translation/
interpretation or print errors.
Symbols applied to the machine
• Do not insert objects into the protection grille
while the machine is running.
20K
Risk of
electrocution
Equipotential
Hazard due to
moving parts
20K

5
20K
6
1
5
2
3
4
20K
7
8
9
BA
Fig. 1
Knowing the appliance
The equipment is a spiral mixer, totally in stainless steel,
designed to mix the dough in a few minutes, ensuring better
oxygenation of the product.
Fig. 1
The main parts of the machine are:
1 Protection grille: prevents you from inserting your
hands into the bowl while the cycle is in progress; if the
protection is lifted during mixing, the movement of both
the spiral and the bowl is stopped.
2 Bowl
3 Control panel
4 Wheel with brake
5 Wheel without brake
6 Power cable
7 Equipotential terminal
8Dough-breaking rod
9Spiral
10 Shows the correct direction of rotation of the bowl
Control panel
ASTOP button: stops the rotation of both the spiral and the
bowl
BSTART button: starts the rotation of both the spiral and
the bowl
Basic notions
Ed. 0121 - 70702582 REV01 Silea - Use and maintenance

6
20K
20K
Y
E
A
S
T
B
A
K
E
R
’
S
1
2
3
4
STOP START
Fig. 2
Fig. 3
Use
Powering the appliance
Fig. 2
Insert the appliance plug into the socket provided to power it.
Processing
The machine mixes the dough thanks to the rotating
movement of both the bowl and the steel spiral.
When using for the first time, carefully clean the product by
carefully following the instructions in the dedicated chapter.
Maintenance and cleaning - page 8.
Place the ingredients in the bowl following the order and
quantities provided for in the recipe, lower the protection grille
and press the “START”button.
To turn the machine off, press the STOP button; raise the
protection grid, remove the dough-breaking rod and extract
the dough.

7
20K
H2O
Fig. 4
Warnings
Before any cleaning, it is necessary to switch o the
power to the appliance (acting on the system switch)
and wear suitable personal protection equipment (e.g.
gloves, etc.). The user must carry out only routine maintenance,
for extraordinary maintenance, contact a Service Centre
requesting service from an authorised technician.
The Manufacturer warranty does not cover damages due to
negligent or incorrect maintenance or cleaning (e.g. use of
unsuitable detergents).
The cleaning of any component must be carried
out wearing adequate personal protection devices
(e.g. gloves, etc.).
When cleaning any part or accessory do NOT use:
• abrasive or powder detergents;
• aggressive or corrosive detergents (e.g. hydrochloric
or sulphuric acid, caustic soda, etc,). Caution! Never use these
substances also when cleaning the substructure/floor under
the appliance or its base;
• abrasive or sharp tools (e.g. abrasive sponges, scrapers, steel
brushes, etc.);
• steamed or pressurised water jets.
It is best to have an authorized service centre perform
maintenance and inspection on the appliance at least
once a year to ensure top working and safety
conditions.
Cleaning the appliance
Cleaning the external steel parts
Fig. 4
Make sure that the power supply has been turned off.
Use a cloth soaked in hot soapy water and finish with a
thorough rinsing and drying, taking care to remove all
traces of detergent.
Cleaning the bowl, spiral and dough-breaking rod
Make sure that the power supply has been turned off.
Use a cloth soaked in warm soapy water or a detergent
suitable for cleaning surfaces in contact with food.
Finish with a thorough rinsing and drying, taking care to
remove all traces of detergent.
Cleaning the control panel
Clean the control panel with a soft cloth and a little detergent
for delicate surfaces. Avoid using considerable quantities of
product since any infiltration may damage the keys. Avoid
also using very aggressive detergents that may damage the
polycarbonate screen printing.
Downtime for prolonged periods
During any downtime, switch the power off. Protect the steel
outside surfaces passing over them with a soft cloth slightly
damp with Vaseline oil.
Before resuming operations:
• accurately clean the equipment and accessories;
• reconnect the equipment to the power;
• inspect the equipment before using it.
Maintenance and cleaning
Disposing of food residues
The ash and food residues removed when cleaning
must be disposed of according to the regulations in
force in the country where the product is used.
If in doubt, we suggest contacting the local authorities to ask
for the correct method of disposal.
Ed. 0121 - 70702582 REV01 Silea - Use and maintenance

8
Disposal at end of life
To avoid any unauthorised use and associated risks,
before discarding the machine make sure it cannot be
used; for this purpose, cut and remove the power cord
(once the equipment is unplugged).
Make sure no child can accidentally remain trapped inside
the cooking chamber, locking the door (for example, with
adhesive tape or locks).
Equipment disposal
Pursuant to art. 13 of Legislative Decree no. 49 of 2014
“Implementation of WEEE directive 2012/19/EU on
electric and electronic waste”, the barred bin symbol
specifies that the product was introduced on the
market after August 13, 2005 and that it must not be discarded
with other waste at the end of its working life but disposed of
separately. All the equipment has been made with recyclable
metal materials (stainless steel, iron, aluminium, zinc plate,
copper, etc.) that as a percentage make up more than 90% of
the weight. Attention must be paid to the management of this
product at the end of its life, reducing any negative impact on
the environment and improving the efficiency of resources,
applying the principles of “who pollutes pays”, prevention,
preparation for re-use, recycling and recovery. Please remember
that illicit or incorrect product disposal is punishable by law.
Information on disposal in Italy
WEEE equipment in Italy must be delivered to:
• to Collection Centres (also named eco-islands or
eco-platforms)
• the dealer where new equipment is purchased who must
withdraw it free of charge (“one to one”withdrawal).
Information on disposal in European Union countries
The EU Directives on WEEE equipment has been adopted
in different ways by different countries, therefore in order to
dispose of this equipment correctly we suggest that you
contact your local authority or your dealer in order to ask the
correct method of disposal.
Maintenance and cleaning

9
Ed. 0121 - 70702582 REV01 Silea - Use and maintenance
Warranty
• 8.1 Each Product sold is to be considered compliant when
delivered in the quantity, quality and type indicated in the
written Confirmation. Please refer to the provisions of art. 1.1.
• 8.2 The Seller warranties:
• (a) that the Products are free from defects in material and
workmanship, and
• (b) that (except in the case of defects known or to be
known by the Buyer) the Products are of merchantable
quality.
• 8.3 Any hidden defects of the Products must be reported in
writing by the Buyer within 8 days of discovery, under penal-
ty of forfeiture. Packaging defects are excluded - even if they
have caused defects or damage to the internal Products; in
fact, packaging defects have to be reported at the time of
delivery, pursuant to art. 5.8 of the present General Condi-
tions of Sale.
• Written notices by the Buyer for the Products defective shall
contain a full description of the defects and faults as well as
the mention of the delivery date and that of defect discovery
of the Products.
• Warranty is excluded if the defect derives from the Buyer’s ac-
tions, such as (and not limited to) incorrect installation of the
Product, use of the Product in a manner that does not comply
with the normal method of use, failure to comply with the
instructions contained in the “user and installation manual”,
tampering with the Product. Warranty does not cover normal
wear and tear of the Product due to use.
• The seller is responsible for defects that occur within one year
from the activation of the warranty as provided for in art. 8.12
of the present General Conditions of Sale.
• 8.4 The Seller shall have the right to examine, or have a rep-
resentative examine, the defective Product and, should the
existence of the defect be ascertained, the Buyer shall be en-
titled to repair or replacement, at the sole final decision of
the Seller.
• Once the defect is reported, the Buyer must not use the Prod-
uct until it is examined by the Seller or by their deputy. In case
the Seller realises that the Product was used after the notifi-
cation of the complaint, the Buyer loses the right to obtain
replacement or repair.
• 8.5 Replacement or repair will take place under the following
terms:
• a) The Seller may repair the defective Products by going - or
sending a deputy - to the place where such Products are
located;
• b) Alternatively, the Seller may repair the defective Product
at its own factory, or other place chosen by the Seller;
• c) Or alternatively, the Seller may opt for the replacement of
the defective Products.
• In case the repair / replacement of the Products is not pos-
sible, the Seller will pay the Buyer a refund. Such refund shall
be subjected to quantification, yet must not exceed the price
paid for the Products. Any compenation for damage is ex-
cluded.
• 8.6 In case of repair of the Products at a place chosen by the
Seller or in case of replacement of the defective Products, the
shipment of the Product will be charged to the Buyer who
must send them, at his own expense and risk, to the place
indicated by the Seller.
• 8.7 In no case shall the Seller be held liable for any indirect
or consequential damages and/or loss of profit that the Buy-
er may suffer arising out of or caused by defective or faulty
Products such as (but not limited to) cancellation of orders by
customers, penalties for late deliveries, forfeitures or indemni-
fications of whatsoever nature.
• 8.8 The Seller shall indemnify and hold the Buyer harmless
from any liability or prejudices arising out of defective or
faulty Products, unless the alleged liability arises from any
negligent act or’ omission by the Buyer or any failure by the
Buyer to perform its obligations.
• 8.9 The Seller shall not be liable for damage to persons and /
or property that may derive from improper use of the Prod-
ucts and / or from any use, processing or transformation of
the Products that do not comply with their intended use and
/ or with the instructions provided by the Seller, except the
case of gross negligence or wilful misconduct by the Seller.
• The Seller will also not be liable in the event of damage to
persons or property or in the case of malfunction or damage
or deterioration of the Product deriving from the fact that the
Product has been connected to a non-compliant electrical
system.
• 8.10 The Buyer shall not be able to raise any claim for personal
injury or damage to property other than those which are the
subject of the contract, or for loss of profit, unless it is clear
from the circumstances of the case that the Seller committed
“gross negligence” .
• 8.11 “Gross negligence” shall not include any and all lack of
adequate care and expertise, but it is to be intended as an
act or omission by the Seller which implies either a failure to
consider any serious risk that a conscientious supplier would
normally have foreseen as likely to occur, or a deliberate ne-
glect of any risk deriving from such act or omission.
• 8.12 The validity of the Warranty hereto referred is subject
to activation on the website www.cuppone.com within 48
hours after the time the Product is installed.
Spare parts
• 9.1 Until and within 10 years as of the delivery of the Prod-
uct, the Seller undertakes to assist the Buyer in identifying
the spare parts for the maintenance of the Product (if it is so
requested by the Buyer). In any case, the Seller is in no way
responsible for the failure to identify such sources.
Applicable law and multi-step clause
• 11.1 The Italian law, as the law of the Seller, shall govern the
sale under the present Terms and Conditions of sale.
• 11.2 Both the Seller and the Buyer exclude the application of
the Vienna Convention.
• 11.3 The parties shall defer the disputes arising out of the
present contract to a mediation attempt managed by the
Service of Mediation of the Chamber of Arbitration of Milan.
• If the mediation attempt fails, all disputes - included those of
not contractual nature - arising out of, related or connected
to the present General Conditions of Sale shall be settled by
arbitration under the Rules of the Chamber of Arbitration of
Milan (the Rules), by a sole arbitrator / three arbitrators, ap-
pointed in accordance with the Rules, which are deemed to
be incorporated by reference into this clause. The Arbitral Tri-
bunal will judge according to the Italian law. The seat of the
arbitration will be in Milan (Italy). The language of the arbitra-
tion will be Italian.

10
ONCE THE APPLIANCE HAS BEEN INSTALLED, THE DEALER MUST ACTIVATE THE WARRANTY.
Fig. 5
20K
MADE IN ITALY
Mod.SIL/30KR - C5 - CP
VOLT
AC
3-400-50HZ
KW
2,1
2020
S/NSIL30KRC5CP 20 01 0129
MADE IN ITALY
Mod. SIL/30KR - C5 - CP
VOLT AC 3-400-50HZ KW 2,1
2020
S/N SIL30KRC5CP 20 01 0129
What to do in case of any malfunction
• Check if any error messages are displayed
Message ................................................................................................................
• Note the product data (rating plate) and the date and number
of the appliance purchase invoice.
Serial number.....................................................................................................
Model......................................................................................................................
Invoice date.........................................................................................................
Invoice number ................................................................................................
• Read the chapter on warranty carefully.
Warranty - page 9.
• Call an authorised Service Centre or call the dealer directly
stating the appliance data. While waiting for Technical
service, disconnect the appliance from the mains.
Something is not working...
Model
Electrical parameters
Absorption
Year of production
Serial number
CUPPONE 1963
Cuppone F.lli S.r.l.
Via Sile, 36
31057 Silea (TV) - ITALY
T [phone]
F [phone]
[e-mail] - www.cuppone.com

CUPPONE 1963
Cuppone F.lli S.r.l.
Via Sile, 36
31057 Silea (TV) - ITALY
T [phone]
F [phone]
[email protected] - www.cuppone.com