Current Solutions TopTENS User manual

SO
L
U
TI
O
N
S
TM
A Roscoe Medical Company
CURRENT
The purpose of this guide is to assist you in correctly operating your TopTENS™ unit. Do not use this
device for undiagnosed pain symptoms until consulting a physician. This guide is not intended to
replace or substitute the TopTENS™ Instruction Manual. PLEASE READ THE INSTRUCTION MANUAL
COMPLETELY BEFORE USING THIS DEVICE. Read, understand and practice the contraindications,
warnings, cautions and operating instructions found on pages 1-9 of your instruction manual.
Always follow the operating instructions prescribed by your healthcare provider.
QUICK REFERENCE GUIDE PAGE 1
On / + button: Power on
adjust / increase setting key
O / - button: Power o
adjust / decrease setting key
Therapy mode selection button/
Time selection button
Mode: Mode selection button
Channel 1 output socket
Channel 2 output socket
Belt clip
Battery compartment
Battery cover
1
2
3
4
5
6
7
8
9
TOP TENS™UNIT
For more information about your TopTENS™ unit, visit us online at currentsolutionsnow.com or call 1-800-871-7858.
LEAD WIRES
(2 INCLUDED,
ONE FOR EACH CHANNEL)
Top
Back
Front
1
2
4
3
5 6
7
8
9
ELECTRODES
(PACKAGE OF 4)
12
3
4
5
Channel 1 intensity level
Channel 2 intensity level
Low battery indicator
Program number
Timer
1
2
3
4
5
LCD DISPLAY
TOP TENS DT6030 replacement
parts:
WW6000 – white lead wires
E1P2020BC2 – electrodes

Please see page 16 of your TopTENS™ Instruction Manual for troubleshooting tips.
PROBLEMS WITH YOUR DEVICE?
SO
L
U
TI
O
N
S
TM
A Roscoe Medical Company
CURRENT
QUICK REFERENCE GUIDE PAGE 2
|
2CONNECT ELECTRODES
TO LEAD WIRES
Firmly insert
the end of
the lead wire
pin into the
electrode
connectors.
Make sure the connection is complete and
no bare metal of the pins is exposed.
3CONNECT LEAD WIRES
TO TOP OF DEVICE
This unit operates
with one or two
sets of electrodes.
When using one
set, plug lead wire
into Channel 1
on top of the unit.
Use Channel 2 to
operate a second
set of electrodes.
4PLACE ELECTRODES
ON SKIN 6SELECT PROGRAM
Remove electrodes
from protective
backing. Keep
backing to properly
store electrodes after
use.
Before applying
electrodes, make
sure the skin at the
application site is
clean and dry.
Pressing the Mode button will activate the default
therapy mode setting, and will ash on the display.
Press the On /+to increase the therapy mode or
O /–to decrease.
7SELECT DESIRED
TREATMENT TIME
Press the Mode button
to select one of 12 preset
treatment times ranging
from 5-60 minutes or
continuous. Press the
On /+to increase the
treatment time or O /–
to decrease.
8SELECT THERAPY
INTENSITY LEVEL
Press the CH button to select the appropriate channel
and intensity level for each.The CH1 / CH2 will ash on
display. Press the On /+ to increase the intensity level
or O /– to decrease to a comfortable level.
As a safety precaution, changing the therapy mode
setting during a therapy session cause the intensity
level to reset to O.
5TURN DEVICE ON
TOP VIEW
TheTopTENS™ unit will turn o automatically when
therapy time has elapsed. In continuous mode (C),
the device must be turned o manually by pressing
the O/- button.
If you alter the program mode during your therapy,
the treatment time will not restart unless you reset
the therapy time.
As a safety feature, the intensity level will change to
O when the Mode button is pressed during a session.
Low battery indicator signals when battery is
low. Replace battery when stimulation feels weaker.
SPECIAL FEATURES
Steps 1–4 should be performed with the device turned OFF.
Once the unit has been turned ON, do not remove electrodes
without rst turning OFF the device.
IMPORTANT!
Check that electrodes are securely placed on
the skin before activating device. Press the On /+
button located on the far right of the control panel to
turn the device ON.
See Electrode Placement Guide for more information.
1INSERT BATTERY
Press arrow and slide battery compartment
cover open. Insert the 3 AAA batteries,
matching the + and – ends to those in unit.
Do not remove or adjust electrodes until turning the
device o by pressing the O /–button for 3 seconds.
Changing the program setting during a therapy
session will not aect the selected treatment time.
Changing the treatment time setting during a therapy
session will not aect the selected program.
Please contact your local dealer or the device center from where you purchased your unit.
NEED REPLACEMENT PARTS?