Curt Manufacturing 13146 Service manual

PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE ALL FASTENERS ARE TIGHT AND ALL STRUCTURAL COMPONENTS ARE SOUND
CURT Manufacturing LLC. warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective, Curt Manufacturing LLC. may repair or replace
the product at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement
of products found to be defective, and specifically excludes liability for incidental or consequential loss or damage.
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
MAKE: STYLE:
MIN.
20
WARNING: NEVER EXCEED YOUR VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY
WEIGHT CARRYING:
INSTALLATION TIPS:
INSTALLATION REQUIRES:
VEHICLE PHOTO:
HITCH ILLUSTRATION:
REPRESENTATIVE PHOTO
MAKE SURE YOUR HITCH MATCHES
LEVEL OF DIFFICULTY:
EASY
EASY MODERATE CHALLENGING
1. BEFORE YOU BEGIN INSTALLATION, READ ALL
INSTRUCTIONS THOROUGHLY.
2. TO EASE INSTALLATION, 2 PEOPLE MAY BE
REQUIRED.
3. USING PROPER TOOLS WILL GREATLY IMPROVE
THE QUALITY OF THE INSTALL AND REDUCE THE
TIME REQUIRED.
4. NEED HELP OR HAVE SOME QUESTIONS?
CALL TECHNICAL SUPPORT AT 800.798.0813
Safety glasses should be
worn at all times while
installing this product
.
YEARS: 2014-PRESENT ACURA; HONDA MODEL: MDX; PILOT SUV
6000
900
TRAILER WEIGHT:
TONGUE WEIGHT:
13146 INSTALLATION INSTRUCTIONS
LBS.
LBS.
6/24/2015
WEIGHT DISTRIBUTION: TRAILER WEIGHT:
TONGUE WEIGHT:
8000
900
LBS.
LBS.
MIN.
40
IF YOU ARE HESITANT TO UNDERTAKE
THIS TASK ON YOUR OWN, CONTACT AN AUTHORIZED
CURT INSTALLER FOR ADDITIONAL ASSISTANCE.
NOVICE INSTALL TIME:
PRO INSTALL TIME:
RATCHET SOCKET
22mm
TORQUE
WRENCH
SOCKET
EXTENSION
6"
SAFETY
GLASSES
- TEMPORARILY LOWER
SPARE TIRE
- NO DRILLING REQUIRED
WIRE PIPE
BRUSH
-WELDNUT CLEANING
MAYBE REQUIRED

INSTALLATION WALKTHROUGH:
For more information log onto www.curtmfg.com, & for helpful towing tips log onto www.hitchinfo.com
Parts List DESCRIPTION
PART NUMBER
QTY
ITEM HEX BOLT
M14 - 1.5 x 40 HEX61 CONICAL TOOTHED WASHER9/16" CONICAL WASHER62
1
2
PASSENGER
SIDE FRAME
DRIVER SIDE FRAME
EXISTING WELDNUTS
1. Lower spare tire from inside of vehicle by using
the tools under storage compartment (as shown).
2. Weldnut cleaning may be required. Raise hitch into
position and secure with the M14 hardware provided.
Torque M14 bolts to 139 lb-ft.
3. Raise spare tire back into place following step 1's
instructions. Install complete.

GROSS LOAD CAPACITY WHEN USED AS A WEIGHT CARRYING HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT.
GROSS LOAD CAPACITY WHEN USED AS A WEIGHT DISTRIBUTION HITCH: LBS. TRAILER WEIGHT & LBS. TONGUE WEIGHT
***DO NOT EXCEED VEHICLE MANUFACTURER'S RECOMMENDED TOWING CAPACITY.***
HAVING INSTALLATION QUESTIONS? CALL TECHNICAL SUPPORT AT 1-800-798-0813
INSTALLATION STEPS
PERIODICALLY CHECK THIS RECEIVER HITCH TO ENSURE THAT ALL FASTENERS
ARE TIGHT AND THAT ALL STRUCTURAL COMPONENTS ARE SOUND.
Curt Manufacturing LLC., warrants this product to be free of defects in material and/or workmanship at the time of retail purchase by the original purchaser. If the product is found to be defective,
Curt Manufacturing LLC., may repair or replace the product, at their option, when the product is returned, prepaid, with proof of purchase. Alteration to, misuse of, or improper installation of
this product voids the warranty. Curt Manufacturing LLC.'s liability is limited to repair or replacement of products found to be defective, and specifically excludes liability for incidental or
consequential loss or damage.
6000 900
8000 900
ACURA MDX & HONDA PILOT
6/24/2015
13146
40
49
20
HITCH WEIGHT: LBS.
INSTALL TIME
PROFESSIONAL: MINUTES
NOVICE (DIY): MINUTES
INSTALL NOTES:
Parts List
DESCRIPTION
PART NUMBER
QTY
ITEM
HEX BOLTM14 - 1.5 x 40 HEX61
CONICAL TOOTHED WASHER9/16" CONICAL WASHER62
TOOLS REQUIRED
RATCHET
22mm SOCKET
6" EXTENSION
TORQUE WRENCH
WIRE PIPE BRUSH
1
2
EXISTING WELDNUTS
DRIVER SIDE FRAME
PASSENGER SIDE FRAME
1. Lower spare tire from inside of vehicle by using the tools under storage compartment.
2. Weldnut cleaning may be required. Raise hitch into position and secure with the M14 hardware provided.
Torque M14 bolts to 139 lb-ft.
3. Raise spare tire back into place following step 1's instructions.
- NO DRILLING REQUIRED