CyberData SIP Strobe User manual
Zoom Configuration Guide: SIP Strobe
Document Part # 931710A
CyberData Corporation
3 Justin Court
Monterey, CA 93940
(831) 373-2601
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 1
Zoom Configuration Guide: SIP Strobe
Document # 931710A
COPYRIGHT NOTICE:
© 2019, CyberData Corporation, ALL RIGHTS RESERVED.
This configuration guide and related materials are the copyrighted property of CyberData
Corporation. No part of this configuration guide or related materials may be reproduced or
transmitted, in any form or by any means (except for internal use by licensed customers), without
prior express written permission of CyberData Corporation. This configuration guide, and the
products, software, firmware, and/or hardware described in this configuration guide are the
property of CyberData Corporation, provided under the terms of an agreement between
CyberData Corporation and recipient of this configuration guide, and their use is subject to that
agreement and its terms.
DISCLAIMER: Except as expressly and specifically stated in a written agreement executed by
CyberData Corporation, CyberData Corporation makes no representation or warranty, express or
implied, including any warranty or merchantability or fitness for any purpose, with respect to this
configuration guide or the products, software, firmware, and/or hardware described herein, and
CyberData Corporation assumes no liability for damages or claims resulting from any use of this
configuration guide or such products, software, firmware, and/or hardware. CyberData
Corporation reserves the right to make changes, without notice, to this configuration guide and to
any such product, software, firmware, and/or hardware.
OPEN SOURCE STATEMENT: Certain software components included in CyberData products
are subject to the GNU General Public License (GPL) and Lesser GNU General Public License
(LGPL) “open source” or “free software” licenses. Some of this Open Source Software may be
owned by third parties. Open Source Software is not subject to the terms and conditions of the
CyberData COPYRIGHT NOTICE or software licenses. Your right to copy, modify, and
distribute any Open Source Software is determined by the terms of the GPL, LGPL, or third
party, according to who licenses that software. Software or firmware developed by CyberData
that is unrelated to Open Source Software is copyrighted by CyberData, subject to the terms of
CyberData licenses, and may not be copied, modified, reverse-engineered, or otherwise altered
without explicit written permission from CyberData Corporation.
TRADEMARK NOTICE: CyberData Corporation and the CyberData Corporation logos are
trademarks of CyberData Corporation. Other product names, trademarks, and service marks may
be the trademarks or registered trademarks of their respective owners.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 2
Revision Information
•9-27-19 Initial Release
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 3
Table of Contents
Table of Contents............................................................................................................................ 3
1.0 Setup Diagram .......................................................................................................................... 4
2.0 Test Setup Equipment............................................................................................................... 5
3.0 Before You Start....................................................................................................................... 6
4.0 Configuration Procedure: Common Area Phone...................................................................... 8
5.0 Configuration Procedure: Setting up the Paging Extension ................................................... 15
6.0 Configuration Procedure: Setting up the Nightringer extension............................................. 24
7.0 Using the CyberData Intercom in a Zoom system.................................................................. 33
7.1 Creating a Call queue.............................................................................................................. 33
7.2 Setting the Blink Scenes ......................................................................................................... 38
8.0 Contact CyberData Corporation ............................................................................................. 40
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 4
1.0 Setup Diagram
Figure 1-1: Interoperability Test Infrastructure
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 5
2.0 Test Setup Equipment
This section describes the products used for interoperability testing with Zoom.
Table 2-1: Setup Equipment
EQUIPMENT MODEL or PART NUMBER FIRMWARE VERSION
CYBERDATA SIP STROBE 011376 20.0.0
CYBERDATA OUTDOOR SIP
STROBE 011479 20.0.0
YEALINK T58A 58.83.3.6
LINKSYS SWITCH SRW208MP
---
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 6
3.0 Before You Start
This configuration guide documents the integration process of a CyberData SIP Strobe.
Network Advisories
Zoom uses a Fully Qualified Domain Name (FQDN) for the SIP server and Outbound Proxy
addresses. The CyberData SIP Strobe needs to perform a DNS A query to resolve the IP address
of Zoom’s Outbound Proxy FQDN. It is necessary to ensure the configured DNS server(s) have
an A record for the Outbound Proxy address.
In addition, be sure to verify the following ports are available for the intercom to use:
•TCP 5060-5061, 5091 (SIP)
•UDP 10500 (RTP)
The strobe will need to traverse the public internet in order to operate with Zoom in the cloud.
The strobe’s paging extension uses SIP port 5060 to receive SIP messages. The Nightringer
extension uses SIP port 5061 to receive SIP messages. Both extensions will send SIP messages
to port 5091, the port used by Zoom’s Outbound Proxy.
SIP ports 5060-5061 and RTP port 10500 are the default values on all noted firmware levels.
Alternatively, SIP ports for the paging and Nightringer extension are configurable on the SIP
page of the web interface.
The RTP port setting on the SIP page is used for both extensions.
The CyberData Discovery Utility can be used to locate CyberData devices on your network.
You may download it from the following web address:
https://www.cyberdata.net/pages/discovery
Note: DHCP addressing mode is enabled on default on all noted firmware levels.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 7
Product Documentation and Utilities
Before you start, download the Operation and Quick Start guides from the intercom’s product
webpage:
CyberData SIP RGB (Multi-Color) Strobe (011376)
https://files.cyberdata.net/assets/011376/011376_931567B_SIP_RGB_Strobe_Ops_Guide.pdf
CyberData SIP Outdoor RGB (Multi-Color) Strobe (011479)
https://files.cyberdata.net/assets/011479/011479_931629A_SIP_Outdoor_RGB_Strobe_Ops_Gu
ide.pdf
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 8
4.0 Configuration Procedure: Common Area Phone
There are several different extension types that can be used on the Zoom platform.
This guide provides instructions to register the CyberData SIP Strobe as a Common Area Phone.
Registering in a different capacity may require creating a user profile and providing an email
address. See Zoom documentation for more details.
1. Log into Zoom. https://zoom.us/signin
Figure 4-1: Log into Zoom
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 9
2. From the Profile page select the “Phone System Management” section and the ‘Users &
Rooms’ subsection.
Figure 4-2: Profile Landing Page
Note: Some text from the profile page has been hidden to protect sensitive information.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 10
3. From the “Users & Rooms” page select ‘Common Area Phones’.
Figure 4-3: Phone System Management
Note: Some text from this page has been hidden to protect sensitive information.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 11
4. From the “Common Area Phones” press the ‘Add’ Button to create a new common area
phone to be used by the device.
Note: The MAC address of the speaker will be required to create the common area phone.
Figure 4-4: Common Area Phones
5. After clicking the Add button a Pop-up will appear that allows extension creation.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 12
Figure 4-5: Common Area Phone Pop-up
6. Set the Display name of the extension. This will be the main Identifier on the Common
Area Phones page.
7. Set the descriptionto the location of the strobe.
8. The extension number will be auto generated but can be changed if desired.
9. Set the MAC address of the device.
Figure 4-6: Common Area Phone Pop-up – Filled
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 13
10. Click the Save button to create the Common Area Phone.
11. Once created the new extension will appear in the list.
Figure 4-7: Common Area Phone list
12. Press the “Provision” button on the extension that was just created.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 14
Figure 4-7: Provisioning Pop-up
Note: CyberData Devices do not support SRTP at the time of writing this document.
13. A popup will appear with manual provisioning information to setup the CyberData
Intercom. Keep this popup open.
14. Make sure to download the “CA Certificate,” which will be needed for device
configuration.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 15
5.0 Configuration Procedure: Setting up the Paging Extension
If you are configuring through the web interface, use the following steps to login to the web
interface of your CyberData device.
Table 5-1: Setting Name correlation
CyberData Setting
Zoom Provisioning Pop-up
Primary SIP Server
SIP Domain
Outbound Proxy
Outbound Proxy Port
Outbound Proxy
Primary SIP User ID
User Name
Primary SIP Auth ID
Authorization ID
Primary SIP Auth Password
Password
1. Click Launch Browser from the CyberData Discovery Utility or point your browser to
the CyberData device’s IP address to access the Home Page of the web interface.
Figure 5-1: CyberData Discovery Utility
2. Enter the default credentials when prompted and click the Log In button.
Username: admin
Password: admin
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 16
Figure 5-2: Web Interface Login
3. From the Home tab press the ‘Device’ Tab.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 17
Figure 5-3: Device Tab
4. Confirm that “Enable NTP” is enabled.
5. Change the NTP server if necessary.
6. Set the Timezone to the local area.
Note: See the operations manual for other time zone strings.
7. Save.
8. Go to the SIP Tab.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 18
Figure 5-4: SIP Tab
9. Set the ‘SIP Transport Protocol’ to TLS.
10. Keep TLS version set to “1.2 Only (Recommended)”.
11. Check the box for “Verify Server Certificate”
12. Set the Primary SIP Server to the SIP Domain from the configuration Popup.
13. Set the Primary SIP User ID to the Username from the configuration Popup.
14. Set the Primary SIP Auth IDto the Authorization ID from the configuration Popup.
15. Set the Primary SIP Auth Password to the password provided in the configuration
Popup.
16. Set the Outbound proxyand Outbound Proxy port to the address provided in the
configuration Popup.
Note: Make sure to separate the port from the outbound proxy information provided by zoom.
17. Check the box for “Force Selected Codec”.
18. Save.
19. Go to the ‘SSL’ Tab.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
ZOOM CONFIGURATION GUIDE: SIP STROBE
Doc. 931710A Page 19
Figure 5-5: SSL Tab
20. Press the ‘Choose Files’ button.
Table of contents
