CYP CLUX-18EU User manual

CLUX-18EU
1 by 8 HDMI v1.3 Splitter
Operation Manual
Draft Manual
CLUX-18EU

Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology. All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
 To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
VR1 20101216 Preliminary Release

Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. PackageContents......................................................................1
4. SystemRequirements..................................................................1
5. Features........................................................................................ 1
6. Specifications..............................................................................2
7. OperationControlsandFunctions............................................. 3
7.1 Front Panel .................................................................... 3
7.2 Rear Panel .................................................................... 4
8. ConnectionandInstallation..................................................... 5

1
1. Introduction
With eight HDMI outputs and capable of distributing 3D content the HDMI
v1.3 1 by 8 splitter is a forward looking device that helps you handle futuristic
technology today. Compatible with HDMI v1.3 which denes the ability to
transfer 3D content, Deep Color (10-bit and 12-bit) video and new lossless
compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital
audio, this device doesn’t merely handle splitting and distributing, far from it,
it also amplies and equalizes your signals to provide high performance I/O of
audio and video. Further, this device allows users to cascade up to 10 layers for
extend and distribute the 1080p/8 bit signal without loss or delay.
2. Applications
• Display HDMI and 3D content
• Simultaneously display content on multiple screens
• Retail store/Conference/Advertising display
3. Package Contents
• 1 by 8 HDMI v1.3 Splitter
• 5V DC power supply adaptor
• Operation Manual
4. System Requirements
Input source with HDMI/DVI connector and output up to 8 HDMI displays.
5. Features
• HDMI v1.3, HDCP1.1 and DVI1.0 compliant receiver
• Deep color video up to 12bits, 1080p@24/60Hz
• Allows one HDMI source to simultaneously connect with up to eight HDMI
displays
• HDCP keysets allows each output to work independently when connected
to an HDMI display
• Transmits an HDMI source to eight outputs without any signal loss
• Supports DVI source/display by using and HDMI/DVI adaptor cable
• Support LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD master
audio transmission (32 ~ 192KHz sampling rate)
• Supports a wide range of PC and HDTV resolutions from VGA to WUGA and
480i to 1080p
• HDMI cable distance testing showed that with 1080p/8bits resolution, the
input source can be 15 meters away and with 1080p/12bits it can be 10
meters away
• HDMI cable distance testing showed that with 1080p/8bits resolution, the
output source can be 15 meters away, and with 1080p/12bits it can be 15
meters away

2
6. Specications
TMSD Clock Frequency 225MHz
Input Port 1 x HDMI
Output port 8 x HDMI
ESD Protection Human Body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 240(W) x 103(D) x 25(H)
Weight(g) 225
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage temperature -20˚C~60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (no condensation)
Power Consumption (W) 10W(Max)

3
7. Operation Controls and Functions
The following sections describe the hardware components of the unit.
7.1FrontPanel
2 3 41 1
1. HDMI OUT 1/2/3/4: Using HDMI cables connect these slots to displays in
order to show HDMI content.
Note: A.This system was tested with 24AWG cables if using cables of
another type, the performance of this system may be different.
 B. Cable distance tested with a PS3 & 40” Samsung LED UA40B700
12-bits LCD TV.
 C.Figures provided in this manual are for reference only, actual
gures may depend on the source and display used along with
the cables specications.
2. SYNC: This LED will turn yellow when the detected the input signals.
3. HDMI IN: This slot connects with source devices such as DVD/Blu-Ray
players in order to receive on HDMI signal.
4. Power LED: The green LED will illuminate when the power is plug with the
AC wall outlet.
6. Specications
TMSD Clock Frequency 225MHz
Input Port 1 x HDMI
Output port 8 x HDMI
ESD Protection Human Body model: ± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions (mm) 240(W) x 103(D) x 25(H)
Weight(g) 225
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0˚C~40˚C / 32˚F ~ 104˚F
Storage temperature -20˚C~60˚C / -4˚F ~ 140˚F
Relative Humidity 20~90% RH (no condensation)
Power Consumption (W) 10W(Max)

4
7.2RearPanel
1 3 4 5
2 2
1. USB: For software update only.
2. HDMI OUT 5/6/7/8: Using HDMI cables connect these slots to displays in
order to show HDMI content.
3. SYS Reset ON/OFF: This switch allows the user to perform a system reset.
The default setting is OFF, leave as is when in normal use. By switching
ON, the unit will perform a reset every 8~10 minutes, in order to perform
this function the displays must have CEC support. When performed
successfully, the system will automatically switch the displays to HDMI
1 input. The system reset will not perform on those displays that do not
have a CEC function.
4. EDID Control switch: This EDID control switch is determined if you are
going to use the EDID from the display attached to output 1 or use an
onboard EDID. When select to TV, the EDID will attach to output 1. When
selected to STD, the EDID will become onboard EDID and the factory
default setting is in TV mode.
5. Power: Plug the DC 5V power supply into the splitter and connect the
adaptor to AC wall outlet.

5
8. Connection and Installation
BluRay or DVD
TV Monitor TV Monitor
TV
Monitor Monitor
BluRay or DVD
TV
Monitor Monitor
TV
Monitor Monitor

6
Acronyms A
Acronym Complete Term
CAT5/6 Category 5 / 6 Cable
ESD Electrostatic Discharge
LED Light-emitting Diode
RJ45 Registered Jack 45
USB Universal Serial Bus

7

MPM-CLUX18EU
Home page: http://www.cypress.com.tw
CYPRESSTECHNOLOGYCO.,LTD.