CYP CS-HH User manual

CS-HH
HDMI Enhancer
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 10/06/12 Preliminary Release
VR1 12/10/12 Add Power Main in Sec.8
VS2 24/06/13 Updated format/diagrams

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 2
6. Operation Controls and Functions....... 3
7. Connection Diagram ............................ 4
8. Specications ........................................ 5
9. Acronyms ............................................... 5

1
1. INTRODUCTION
This HDMI to HDMI Enhancer can extend or cascade HDMI digital
audio and video signals without signal loss. It is capable of receiving
and transmitting 2.25 Gbps bandwidth rate and supports resolutions
up to 1080p@60 Hz. It has the added benet of a built-in equalizer and
CDR (Clock Data Recovery) which can provide long cable support
even at deep color resolutions. The unit can be powered by the HDMI
output of suitably equipped source equipment (eliminating the need
for a power supply) or if the HDMI source does not provide a suitable
5V power supply an HDMI Power Inserter can be used.
2. APPLICATIONS
• Installation usage
• HDMI signal cascading
• HDMI cable/system extension
3. PACKAGE CONTENTS
• HDMI Enhancer
• Operation Manual
4. SYSTEM REQUIREMENTS
HDMI equipped source device and an HDMI equipped display (TV
or monitor) or cascade with another HDMI device (such as an HDMI
splitter) to extend the distance.

2
5. FEATURES
• Built-in TMDS equalization and CDR (Clock Rate Recovery) for
extended HDMI cable distance
• Resolutions support:
- HDTV: 480i to 1080p@24/50/60 Hz
-PC: VGA to WUXGA (RB)
• Capable of receiving and transmitting HDMI signals at 2.25 Gbps
bandwidth
• Requires HDMI source devices to output power to the unit over
HDMI cable
• Supported HDMI cable distance: 15 meters (input and output)
• Compact design
Note: For devices that do not support this, an HDMI Power Inserter can
be used in-line between the source device and the unit to provide
power.

3
6. OPERATION CONTROLS AND FUNCTIONS
1 2
1HDMI IN
Connect the HDMI input to the HDMI output of your source
equipment such as Blu-ray player or HDMI switcher/HDMI Splitter/
HDMI Matrix. The unit can be directly powered from HDMI source
equipment that provides power through the HDMI cable or by an
HDMI Power Inserter connected between the source and the unit.
2HDMI OUT
Connect the HDMI output to the HDMI input of an HDMI transmitter
or TV/display.

4
7. CONNECTION DIAGRAM
HDMI OUT
HDMI IN
HDMI OUT 1HDMI OUT 2
HDMI OUT
HDMI IN
AV Receiver
HDTV
HDMI Cable
HDMI Cable
(Up to 15m)
HDMI Cable
(Up to 15m)
HDMI Cable
(Up to 15m)
HDMI Source
(Blu-ray Player
HDMI Cable
(Up to 15m)
HDMI Cable (0.5m)
HDMI Cable (0.5m)
HDTV
HDMI Power
Inserter
HDMI Splitter
(Optional)
HDMI Enhancer
(Optional)
HDMI Enhancer
HDMI Power
Inserter
(Optional)

5
8. SPECIFICATIONS
Frequency Bandwidth 2.25 Gbps (single link)
Input Port 1×HDMI (Female)
Output port 1×HDMI (Female)
Output Resolution HDTV: 480i ~1080p@24/50/60 Hz
PC: VGA~WUXGA (RB)
Input Cable Distance 15m@8/12-bit
Output Cable Distance 15m@8/12-bit
ESD Protection Human Body model:
± 8kV (air-gap discharge)
± 4kV (contact discharge)
Dimensions 65 mm (W)×24 mm (D)×10 mm (H)
Weight 30 g
Chassis Material Plastic
Silkscreen Color Black
Operating Temperature 0˚C~40˚C/32˚F ~ 104˚F
Storage temperature −20˚C~60˚C/−4˚F~140˚F
Relative Humidity 20~90 % RH (no condensation)
Power Consumption 2 W (Max)
9. ACRONYMS
ACRONYM COMPLETE TERM
CDR Clock Rate Recovery
HDMI High Denition Multimedia Interface
TMDS Transition Minimized Differential Signaling