CYP PU-1107-KIT User manual

PU-1107-KIT
Pure digital HDMI over Single CAT6 Extender Set
(Repeatable Version)
OPERATION MANUAL

3
DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

4
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
v1.01 25/04/2014 Amended Format/Diagrams

5
CONTENTS
1. Introduction...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features..................................................7
6. Operation Controls and Functions .......8
6.1 Transmitter Front and Rear Panels....... 8
6.2 Receiver Front and Rear Panels ............ 9
7. Connection Diagram .......................... 10
8. Specications...................................... 11
8.1 Technical Specications ........................11

6
1. INTRODUCTION
The PU-1107-KIT is an uncompressed Pure Digital solution to extend
HDMI signals via a Single CAT6 cable. The PU-1107-KIT extender set can
be used with the PU-1107EX Repeater to extend the HDMI signal over
Single CAT6 up to a total of 80m (40m either side of the repeater). It has
the added benet of a 7 step HDMI signal equalization switch to optimize
the signal strength.
2. APPLICATIONS
Showroom Display and Control
Home Entertainment systems
Commercial/Retail Installations
Commercial Display
3. PACKAGE CONTENTS
1×HDMI over Single CAT6 Transmitter
1×HDMI over Single CAT6 Receiver
1×5V DC Power Supply adaptor
1×Operation Manual
4. SYSTEM REQUIREMENTS
Input HDMI source equipment and output HDMI display with connection
cables and one CAT6 cable.

7
5. FEATURES
7 step EQ adjustment for HDMI signal equalization
v1.3 HDMI, HDCP 1.1 & DVI 1.0 compliant.
HDMI over a single CAT6 (pure digital transmission)
Supports LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus and DTS-HD
Master Audio transmission
Resolution supported: 480i - 1080p 50/60, 1080p 24, VGA - WUXGA
Supports Deep Colour (10 & 12 bit)
Supports xvYCC
Supports CEC bypass
Supports 3D signals
7 step EQ adjustment for HDMI signal equalization

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
TV/STD
10 Bit
CAT6 OUT
EDID
8 Bit 12 Bit
DC 5V
HDMI INPUT
1 2 3 54
1HDMI INPUT: Connect to the HDMI or DVI output port of your source
equipment such as a DVD/Blu Ray player or Set-top box with an HDMI
cable or link up with another compatible receiver unit to extend a
signal over long distances.
2DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
3EDID Control Switch: Switch the EDID between STD and TV modes.
Switch to STD mode to use the unit's built-in EDID settings or switch
to TV mode to use the TV/display’s EDID settings. The default factory
setting is TV, leave as is when the display is working properly.
Note: 1. When EDID is switched to STD the unit will use its built-in EDID
settings which support:
Video →1080p 8-bit, 10-bit or 12-bit (max)
Audio →PCM 2CH
2. The EDID selection will only be activated when the unit is power cycled.
48/10/12-Bit Switch: Switches between 8, 10 or 12-bit modes.
5CAT6 OUT: Connect the CAT6 output of the transmitter to the CAT6
input of the receiver.

9
6.2 Receiver Front and Rear Panels
CAT6 IN
MIN.
EQ
MAX.
DC 5V HDMI OUT
1 2 3 4
1EQ MIN./MAX.: Turn the 'EQ' equalization wheel from 0~7 to optimize
the HDMI signal strength according to the transmission length
required.
2CAT6 IN: Connect to a compatible single CAT6 transmitter device
attached to a source device by HDMI (see Section 8.2).
3DC 5V: Connect the 5V DC power supply to the unit and plug the
adaptor into an AC outlet.
4HDMI OUTPUT: Connect to the HDMI or DVI input (with a HDMI to
DVI adaptor) of a display such as an HDTV/HD monitor or connect
to a compatible transmitter (see Section 8.2) in order to extend the
transmission distance.
Note:
A. Cable tested with CAT6/23AWG/Solid cable, results may vary with cables
of another specifcation.
B. Equipment used in cable distance testing included: PS3 120G, 37" Philips
8-bit LCD TV and 40" Samsung 12-bit LCD TV.
C. The gures provided in this manual are for reference only; actual
performance may depend on the source and display used as well as the
cable specication.

10
7. CONNECTION DIAGRAM
CAT6 IN
MIN.
EQ
MAX.
DC 5V HDMI OUT
DC 5V
HDMI INPUT
CAT6 OUT
EDID
INPUT
8 Bit 12 Bit
HDMI CAT6
CAT6 OUT
DC 5V
HDMI
INPUT
CAT6
Optional
Extender Unit
(PU-1107EX)
Transmitter
(PU-1107TX)
Receiver
(PU-107RX)
DVD or Blu-ray Player
Power
Supply
HDMI Output
Display
HDMI
Input
CAT6
Cable
CAT6
Cable
Power
Supply
Power
Supply