Cypress CLUX-4 User manual

CLUX-4
1x4 HDMI 1.3 with
Multi-channels
Splitter
CLUX-4
Operation Manual

1. Introduction................................................................................
2. Features......................................................................................
3. Operation Controls and Functions..........................................
3.1 Front Panel...........................................................................
3.2 Rear Panel............................................................................
4. Connection and Installation.....................................................
5. Specifications............................................................................
TABLE OF CONTENTS
1
1
2
2
3
4
4

1
1. Introduction
The HDMI v1.3 Distribution Amplifier Series is the most advanced solution to
HDMI signal distribution. Each product in this series is compatible with HDMI v1.3
specifications, a cutting-edge technology which defines the supports to
transfer Deep Color (10-bit and 12-bit) video and new lossless compressed
(Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a
high bandwidth up to 225MHz (6.75Gbps). Besides splitting and distributing, the
HDMI v1.3 DA series also amplifiies signal, provides high performance I/O of
audio and video.
2. Features
 HDMI 1.3, HDCP1.1 and DVI1.0 compliant.
 Deep color video up to 12bit, 1080p@(24/60)Hz.
 One HDMI source connect up to four HDMI displays simultaneously.
 HDCP keysets allows each output to work independently when connected
to a HDMI display.
 Splits a HDMI source up to four outputs without signal loss.
 Supports DVI source and DVI display by using HDMI to/from DVI adaptor
cable.
 Dolby Digital Plus, DTS digital audio transmission (32-192 kHz Fs sample rate).
 Supports a wide range of PC and HDTV resolutions from VGA to UXGA and
480i to 1080p.
 HDMI cable distance test with 1080p/8bits resolution the, Input/Output can
run up to15/15 meters. With 1080p/12bits the Input/Output can run up to
10/15 meters.
 Selects EDID from TV mode or STD mode (this splitter).
 Supports CEC bypass.

2
1 HDMI Output 1: Connect output port to the HDMI display.
When more than one output connected, the HDMI outputs play identical
video signal simultaneously.
2 HDMI Input: Connect input port to the HDMI or DVI output of your source
equipment such as DVD player or set-top-box.
3 EDID Control switch: Default factory setting is TV, leave as is if the display
is properly. Switch to STD to use built-in EDID if the display has problems.
When the EDID control switch in TV selection, the unit will detect the first
HDMI output source’s EDID and record in the unit. If the first detected
output source is DVI it will pass to next source, until the first HDMI been
detected
4 Sync LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
5 Power LED Indicator: The LED will illuminate when the power is
connected.
6 Power: Plug the 5V DC power supply into the splitter and connect the
adaptor to AC wall outlet.
HDMI
OUTPUT
HDMI
INPUT
STD TV
1
EDID
SYNC
POWER
DC 5V
CLUX-4 HDMI V1.3 Splitter
1 2 3 4 5 6
3. Operation Controls and Functions
3.1 Front Panel

3
1 HDMI Outputs 2/3/4: Connect each of the output ports to the HDMI
display. When more than one output connected, the HDMI outputs play
identical video signal simultaneously.
HDMI
OUTPUT
HDMI
OUTPUT
HDMI
OUTPUT
3 24
1
3.2 Rear Panel

HDMI
HDMI
HDMI Cable
DVD or Set-Top-Box
HDTV HDMI display LCD TV
OR OR
4. Connection and Installation
4
5. Specifications
Frequency Bandwidth
Input Port
Output Ports
Power Supply
Dimensions(mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
2.25Gbps (single link)
1 x HDMI female port (Type A connector)
4 x HDMI female ports (Type A connector)
5VDC/2.6A (US/EU standards, CE/FCC/UL certified),
center positive
102(W) x 141(D) x 38(H)
550
Metal
Black
0°C ~ 40°C

5

20080403 MPM-CLUX4
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.