Cypress CV-401V User manual

CV-401V
PC/HD to CVBS Video
Scan Converter
Operation Manual
CV-401V
Draft Manual

Disclaimers
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes
no commitment to update or to keep current the information
contained in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
Copyright Notice
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means
- electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise - without express written permission and consent from
Cypress Technology.
© Copyright 2010 by Cypress Technology. All Rights Reserved.
Version 1.0 December 2010
Trademark Acknowledgments
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

Safety Precautions
Please read all instructions before attempting to unpack or install or
operate this equipment, and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
 Always follow basic safety precautions to reduce the risk of
re, electrical shock and injury to persons.
 To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
 Never spill liquid of any kind on or into this product.
 Never push an object of any kind into this product through
module openings or empty slots, as you may damage parts.
 Do not attach the power supply cabling to building surfaces.
 Do not allow anything to rest on the power cabling or allow it to
be abused by persons walking on it.
 To protect the equipment from overheating, do not block the
slots and openings in the module housing that provide ventilation.
Revision History
Version No Date Summary of Change
V1 20110318 Preliminary Release

Table of Contents
1. Introduction..................................................................................1
2. Applications.................................................................................1
3. PackageContents......................................................................1
4. SystemRequirements..................................................................1
5. Features........................................................................................1
6. Specifications..............................................................................2
7. OperationControlsandFunctions............................................. 3
7.1 Top Panel ...................................................................... 3
7.2 Left Panel ...................................................................... 3
7.3 Right Panel .................................................................... 4
8. OSDMenu....................................................................................5
9. ConnectionandInstallation....................................................... 7

1
1. Introduction
The PC/HD to Video Scan Converter is designed to down scale PC/Component
source to analog CVBS (NTSC,PAL) signal. Ideal for businesses with multiple
CCTV cameras, this device takes your high-resolution camera footage and
scales it to lower resolutions. Supporting PC resolution up to WUXGA@60hz,
this scaler also helps connects new video sources to older displays. The
device features many great functions such like 3D noise reduction, frame rate
conversion, adaptive contrast enhancement… and etc. Further, a simplify OSD
function is available allowing user with easy viewing on the displaying status.
2. Applications
• Security camera display
• Displaying PC signal on the CRT display
• Displaying PC signal on the LCD display
3. Package Contents
• PC/HD to Video Scan Converter
• Power Adaptor
• Operation Manual
4. System Requirements
Input source equipment such as PC/component camera (RGBHV/YPbPr) signal
with D-Sub 15pin or component adaptor cable and output to TV with CVBS
input jack and connection cable.
5. Features
• Converts video signal from PC/component source to NTSC or PAL signal
• Accepts a wide range of PC/VGA input resolution from 480i to 1080p@60Hz
and PC from VGA to WUXGA@60RB
• Output picture size Underscan / Overscan
• 3D noise reduction in both temporal and spatial domain
• Frame rate conversion
• Adaptive contrast enhancement
• OSD Display
• Overscan and underscan adjustment
• Phase and Aspect adjustment
• No software installation require
• Compact and elegant design

2
6. Specications
Input Port 1 x VGA
Output Ports 1 x CVBS
Output Video NTSC/PAL
ESD Protection Human body model: ± 8kV (air-gap discharge)
± 6kV(contact discharge)
Dimensions (mm) 64 (W) x 104 (D) x 26 (H)
Weight (g) 120
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Power Consumption 3W
Relative Humidity 20 ~90%RH (non-condensing)
Support Input Timing
640x480 60,72,75,85
720x400 70(pc)
800x600 56,60,72,75,85
1024x768 60,70,75,85
1152x864 70,75,85
1280x720 59,60(pc)
1280x768 60RB,60
1280x800 60RB,60
1280x960 59(pc),60
1280x1024 59(pc),60
1366x768 60RB,60
1440x900 60RB,60
1600x1200 60
1680x1050 60RB,60
1920x1080 59(pc),60
1920x1200 60RB
480i 59
480p 59,60
576i 50
576p 50
720p 50,59,60
1080i 50,59,60
1080p 50,59,60
Note: When the input timing is not supported, the OSD will display “IN not Support”.

3
7. Operation Controls and Functions
7.1TopPanel
1 2
1. NTSC/PAL MENU (3SEC): Press this button to bring up the OSD which will
display the input timing and output TV system information.
While the OSD is still displaying press the button again to switch output TV
system from NTSC to PAL or from PAL to NTSC.
Press this button for 3 second the OSD will bring up the selection menu.
Press it sequentially to select the desire setting.
2. Power LED: This LED will illuminate in RED when the power is connected
with the power supply.
7.2LeftPanel
1
1. PC IN: This slot is to connect with source equipment such as PC, laptop or
digital camera with D-sub 15pin cable or adaptor converter cable for
input signal sending.
6. Specications
Input Port 1 x VGA
Output Ports 1 x CVBS
Output Video NTSC/PAL
ESD Protection Human body model: ± 8kV (air-gap discharge)
± 6kV(contact discharge)
Dimensions (mm) 64 (W) x 104 (D) x 26 (H)
Weight (g) 120
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature -20°C ~ 60°C / -4°F ~ 140°F
Power Consumption 3W
Relative Humidity 20 ~90%RH (non-condensing)
Support Input Timing
640x480 60,72,75,85
720x400 70(pc)
800x600 56,60,72,75,85
1024x768 60,70,75,85
1152x864 70,75,85
1280x720 59,60(pc)
1280x768 60RB,60
1280x800 60RB,60
1280x960 59(pc),60
1280x1024 59(pc),60
1366x768 60RB,60
1440x900 60RB,60
1600x1200 60
1680x1050 60RB,60
1920x1080 59(pc),60
1920x1200 60RB
480i 59
480p 59,60
576i 50
576p 50
720p 50,59,60
1080i 50,59,60
1080p 50,59,60
Note: When the input timing is not supported, the OSD will display “IN not Support”.

4
7.3RightPanel
1 2
1. CV OUT: This slot is to connect with display TV or monitor with RCA cable
for output image display.
2. DV5V: Plug the 5V DC power supply included in the package into the
unit and connect the adaptor to AC wall outlet.

5
8. OSD Menu
IN 640 x 480 (Input Timing)
OUT NTSC (Output TV System)
NTSC
PAL
Underscan 1
Underscan 2
Overscan
Phase adj 0~31
Aspect Adj
Full Screen
Letterbox
Pan & Scan
Auto TV 4:3
Auto TV 16:9
Below is the example of the scan selection result.
Phase Adjustment’s rang is from 0 ~ 31 and is for image blurry display and or
jiggle character.
Aspect Adjustment: There are total of 5 different adjustments under Aspect
and they are Full Screen, Letterbox, Pan & Scan and Auto TV 4:3 & 16:9.
Full Screen: To allow the image to ll out the screen of the TV.
Letterbox: To t the output image closer to the input source, compressed the
upper and lower image.
Pan & Scan: To t the output image closer to the input source, compressed
the right and left image.
Auto TV 4:3: Allowing the device to auto detect input source signal of 4:3 or
16:9 and make the auto adjustment.
Auto TV 16:9: Allowing the device to auto detect input source signal of 16:9 or 4:3

and make the auto adjustment.
Blow is the sample chart of the selection result:
Aspect Adj
Source TV Full Screen Letterbox Pan&Scan Auto TV 4:3 Auto TV 16:9
X X X
X X
X X
X X X

7
9. Connection and Installation
PC
PC

8
Acronyms A
Acronym Complete Term
CRT Cathode Ray Tube
LCD Liquid Crystal Display
NTSC National Television System Committee
PAL Phase Alternating Line
VGA Video Graphics Array

9

10

11

MPM-CV401V
Home page: http://www.cypress.com.tw
CYPRESSTECHNOLOGYCO.,LTD.