Cypress CVLUX-1080P User manual

CVLUX-1080P
CV/SV to HDMI SD to
Full HD Scaler Box
Operation Manual
CVLUX-1080p

Revision History
Version No Date Summary of Change
V1 20090122 Preliminary Release
Precaution
Failure to follow the precautions described below may cause damage to
Analog to HDMI Scaler Box and void the warranty.
 DO NOT open the case. Doing so will void the warranty. If you find
problem with it, please return back to your retailer or seller who will
assist you or provide you with solution.
 DO NOT use third-Party AC adapter or power cord. Doing so may
damage Analog to HDMI Scaler Box.
 DO NOT bump, jar or drop contents of the products as it may
damage it and result in warranty void.
 DO NOT set any liquids or beverages on the drive as they may
damage Analog to HDMI Scaler Box.

Table of Contents
1
1
1
1
1
2
2
3
3
4
4
1. Introduction…………………………………………………........……….
2. Applications…………………………..……………………................….
3. Package Contents…………………………….…….........................…
4. System Requirements……………….…………….…………........…….
5. Features…………………………………………….......……........………
6. Operation Controls and Functions…………………………………….
6.1 Front Panel ...................................................................................
6.2 Rear Panel ………………………………………….........….....….…
7. Connection and Installation…………………………….........……..…
8. Output Resolution Chart……………….………………...........………..
9. Specications……………………………………………...........………..

1. Introduction
This scaler Box is designed to display your composite video/S-video images on
the HDTV with better viewing resolutions. It can upscale any composite video/
s-video’s input sources to HDMI output with wide-range resolutions. Further,
this device also can transfer sounds for user to enjoy both HD images and
sounds consistently.
2. Applications
 Convert video to HDMI at 1080P for HDMI LCD TV / LCD monitor
 Upscale iPod low resolution to HDMI 1080P
 To improve video quality to HDMI resolution
3. Package Contents
 CVLUX-1080P Scaler Box
 5VDC Power Supply Adaptor
 Operation Manual
4. System Requirements
Input source device, S-Video or CVBS/Video cable with R/L, HDMI cable and
output displayer.
5. Features
 HDMI supports deep color 12 bit, HDCP 1.1, DVI 1.0 compliance
 Scales up Video or S-Video to HDTV 1080p format
 Automatic lipsync (audio delay) ensures audio video synchronization
 Input video systems NTSC/PAL
 Supports 8/10/12 bit deep color on HDMI output up to 6M long
 DVI compatible by using HDMI to DVI adaptor
 HQE (High Quality Image enhancer) function
 Digital Noise Reduction – Minimises picture noise, reproducing images
true to the original
 Block Noise Reduction – Effectively minimizes all MPEG noise, Improving
the digital quality of HDTV broadcasts in particular, where block noise
happens most
 MPEG Noise Reduction – Reduce mosquito noise for MPEG video
images without losing detail
 Motion adaptive 3D Y/C separation comb filter
 3D (frame based) motion adaptive noise reduction
 Advanced 3D motion adaptive de-interlace
1

 Automatic 2:2/3:2 film mode detection
 Video / S-Video input selection button
 Automatic resolution selection and individual resolution selection button
 HDMI output with RGB color space design
6. Operation Controls and Functions
6.1 Front Panel
①POWER selection button - Press the button once to power on the unit,
press again to power off. This device has last memory’s function and will
record your last input selection. The factory default is on CV input.
②INPUT selection bottom - Yellow LED illuminates when composite video is
selected.
- Green LED illuminates when S-Video is selected.
③AUTO selection button - Press the button to set the device in Auto mode
and the device will auto detected HDMI display’s EDID resolution native
then the resolution indicator LED will illuminate.
④MANUAL selection button - Press “MANUAL”button to select resolution of
the HDMI output from VGA to 1080P.
12 3 4
CV
SV
POWER INPUT AUTO
MANUAL
VGA 480P 576P
720P 1080I 1080P
CVLUX-1080P
Video to HDMI Scaler
2

6.2 Rear Panel
①HDMI OUTPUT – Connect to LCD TV/monitor with HDMI cable.
Note: 1. This scaler does not have overscan function however, it may be
adjusted by TV.
2. Audio sound will not perform if no input image.
②SV/CV/RL INPUT – Connect from source with S-Video/CVBS/Video cable
& R/L.
③DC 5V – Plug the 5V DC power adaptor into the unit and connect the
adaptor to AC wall outlet.
7. Connection and Installation
OUTPUT
HDMI CV
SV
L
R
INPUT DC 5V
1 2 3
LCD TV /
HD MONITOR
Scaler Box
DVD /
Vido player
i Pod/itoch
3

8. Output Resolution Chart
9. Specications
RESOLUTION
VGA
480p
576p
720p
1080i
1080p
640×480
720×480
720×576
1280×720
1920×1080
1920×1080
60 Hz
60 Hz
50 Hz
60/50 Hz
60/50 Hz
60/50 Hz
OUPUT
INPUT VGA 480p 576p 720p 1080i 1080p
NTSC   –
(60 Hz)
PAL – – 
(50 Hz)
Input Port Video / S-Video, Audio R/L RCA Jack
Output Port HDMI
Output Resolution VGA, 480p, 576p, 720p, 1080i, 1080p
Input Signal Levels Video at 1vpp, 75Ω
Y: 1.0 Vp-p(75Ω)
C: 0.286 Vp-p(75Ω)
Audio L/R: 0.5Vrms
Video System NTSC, PAL
Audio Sampling Rate 48 kHz
Power Supply 5 V/2.6 A DC (US/EU standards,
CE/FCC/UL certified)
Dimensions 100 mm (W)×157mm (D)×25mm (H)
Weight 332 g
Chassis Material Aluminum
Silkscreen Color Silver
Operating Temperature 0˚C~ 40˚C
Power Consumption 5 W
4

20090218 MPM-CVLUX1080P
Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD.