Cypress CY3269N User manual

CY3269N LIGHTING STARTER DEMONSTRATION KIT
QUICK START GUIDE
Remove the CY3269N kit from the
package.
Insert the 9-V battery into the battery holder.
Press firmly in place.
Tap the color gamut to view different colors
from the RGB LED. Adjust the brightness
using the slider available to the right of the
gamut.
View the output on the RGB LED.
To put the board to “sleep” while powered,
press and hold the circular emblem to the left
of the CapSense logo.
Check for kit updates on:
http://www.cypress.com/go/CY3269N
1
2
3
4
5
6

© 2011 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks
referenced herein are the properties of their respective owners. DOC#: 001-46279 REV. *B
http://www.cypress.com/go/CY3269N
For the latest information about this kit, visit
CY3269N LIGHTING STARTER DEMONSTRATION KIT
QUICK START GUIDE
Battery
AC Adaptor
Jack
Power LED
RGB LED
Ez-Color CY8CLED04
Device
Brightness
Slider
Color Gamut
Sleep Button
ISSP Programming
Header
Mini-USB Port
Note: For optimum performance, place the board horizontally on a flat surface.
CY3269N Board Details