Cypress CDVI-61 User manual

6-in 1-out
DVI Switcher
Operation Manual
CDVI-61

1 4 2 3
RS-232
DVI IN 1
DC 5V
DVI IN 2DVI IN 3DVI OUT
1245 1233
INPUT321 POWER
SIGNAL
ENHANCE
CDVI-61 6x1 DVI Switcher
654
DVI IN 6DVI IN 5DVI IN 4
Introduction
Cypress CDVI-61 is a high performance DVI switcher with remote control. It allows
your various DVI sources to share one DVI display.
Simply pressing one button to select your desired DVI source for display on the
HDTV.
Features
* HDMI, HDCP 1.1 and DVI 1.0 compliant.
* Signal enhancement feature allows you to improve signal quality after long
distance transmission.
* LED indicators.
* Ideal for home theater integration.
* Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA, and UXGA (1600 x 1200)&
HDTV: 480i, 576i, 480p, 576p, 720p, 1080i, and 1080p
* Remote control.
* Easy to install and simple to operate.
Operation Controls and Functions
Front Panel
1. Remote control sensor.
2. DVI inputs: Connect your various DVI sources to each of the DVI input of the
unit using DVI cables.
3. Input select/Indicators: Press the " INPUT" button repeatedly to switch to your
desired input source and the LED will illuminate to indicate which input source
is being selected.
4. Signal Enhancement/Indicator: Press the " Signal Enhance" button to turn on
this feature to improve signal quality after long distance transmission.
Press again to turn off. The LED will illuminate when the signal is enhanced.
5. Power LED Indicator: The LED will illuminate when the power is connected.
Operation Controls and Functions
Rear Panel

CR-22
1
3
2
1. DVI output: Connect the DVI output to the DVI input of your display using DVI cable.
2.DVI inputs: Connect your various DVI sources to each of the DVI input of the
unit using DVI cables.
3. Power: Plug the supplied 5VDC power supply into the unit.
4. RS232: 9-pin D-sub female connector for connecting to your other control
console for remote control.
Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press numerical number button to select your desired
input source.
3. Void buttons (No function). If the button number is
greater than the total input number of the unit then
the button is of no function.
Specifications
* Frequency bandwidth: 1.65Gbps(single link)
* Inputs: 6 x DVI female ports (Type A connector)
* Output: 1 x DVI female port (single link)
* 5VDC universal power supply
* Weight: 1kgs
* Dimension: 240(W) x104(D) x 44(H)mm
RS-232 Remote Control Protocol
The connection between splitter and remote controller with RS-232 modem cable.
ns definition of modem cable
Baud Rate: 9600 bps
Data Bit: 8 Bits
Parity: None
Stop Bit: 1 bit
Splitter Remote Controller
PIN Definition PIN Definition
1 NC 1 NC
2 T xD 2 R xD
3 R x D 3 T x D
4 NC 4 NC
5 GND 5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9 NC 9 NC

LCD TV
DVD 2
DVD 1
STB
Connection and Installation
RS-232 command
* The command is combined with a characters and digits.
* This combination command code has to be separated by ASCII character SPACE
* The command will be executed after ASCII character "CR" input
* After ASCII character "CR" is entered, if the command is legal the unit will reply "OK" message
* If the command is illegal, The unit will reply "NG" message
Command Code Comment
PORT 1 PORT 1 ON
PORT 2 PORT 2 ON
PORT 3 PORT 3 ON
PORT 4 PORT 4 ON
PORT 5 PORT 5 ON
PORT 6 PORT 6 ON
SIGNAL 1 ENABLE SIGNAL ENHANCE
SIGNAL 0 DISABLE SIGNAL ENHANCE
POWER 1 POWER ON
POWER 0 POWER OFF