Cypress CVSD-41AR User manual

4x1
Video/S-Video
Switcher
Operation Manual
CVSD-41AR

Application:
CVSD-41AR CV/SV switcher is designed for switching between
video & S-video sources. Such as VCR,DVD player... to share one
TV display.
Features:
- LED indicators.
- IR remote control
- Suport standard video sources: 480i, 576i.
- Plug and play, easy to install and operate.
- CVSD-41AR can be controlled either through input selection button on
the front panel or using included infrared remote cartrol.
- RS-232 interface allows control from a distant device.
-Ideal for presentation and large shop intergration.
-Support audio format: L/R (analog) or PC AMP speaker system
(option)
Package includes:
- CVSD-41AR unit.
- IR remote control
- 5VDC power supply,centert +.
- A 3A lithium battery.
- Manual
- One set of 1 RCA-1 RCA video cable
- One set of S-video cable
- One set of 2 RCA-2 RCA audio cable
Front Panel
1 2 3 4 5 6 7 8 9
10 11
1. Power indicator LED.
2. Power ON/OFF switch: Push the button to turn ON/OFF the power.
3. IR sensor: Infrared remote control sensor.
4. Input 1 indicator LED .
5. Input 1 switch: Push the button, LED lights up, source 1 is selected.
6. Input 2 indicator LED.
7. Input 2 switch: Push the button, LED lights up, source 2 is selected.
8. Input 3 indicator LED .
9. Input 3 switch: Push the button, LED lights up, source 3 is selected.
10. Input 4 indicator LED.
11. Input 4 switch: Push the button, LED lights up, source 4 is selected.
POWER 1 2 3 4 INPUT
CVSD-41AR
4x1 Video/S-Video Switcher

1. RS-232: 9-pin D-sub femal connector for connecting to your other control
cansole for remote control.
2. CV/SV+Audio output: Use a CV/SV cable to cnnect to your display.
Use a 1 RCA to 1 RCA video cable to your display.
Use a 2 RCA to 2 RCA audio cable to your display.
(Option) connects to your PC AMP speaker systern.
3. CV/SV + Audio input 4: Use a CV/SV cable to connect to your source 4.
4. CV/SV + Audio input 3: Use a CV/SV cable to connect to your source 3.
5. CV/SV + Audio input 2: Use a CV/SV cable to connect to your source 2.
6. CV/SV + Audio input 1: Use a CV/SV cable to connect to your source 1.
7. DC power jack : 5V1A power input ,center +.
S1
V1
L1
R1
S3
V3
L3
R3
S2
DC 5V
V2L2R2S4V4L4R4
INPUT 1/INPUT 2INPUT 3/INPUT 4OUTPUT
RS232
AUDIO
R
LVS
Rear Panel
1 2 3
4
5
6
7
Remote Control
1
2
34
5
1. Power: Switch between power ON and Standby.
2. Press button 1 to select source 1.
3. Press button 2 to select source 2.
4. Press button 3 to select source 3.
5. Press button 4 to select source 4.
Note: Replacement battery can be
found at a local electronic retail store.
Pull out the tab to
activate battery

Specifications
Input
Output
PC /YPbPr
Bandwidth
Differential
gain
Differential
phase
Power
consumption
Power
Dimensions
Unit gross
Video:
S-Video:
Analog Audio: (L/R)
1 Vp-p @75 ohm
2Vrms max 47 k ohm
650 MHz (-3db)
0.05%
0.05 degree
5 Watts (max.)
5V 1A AC adaptor
292(W)x 73(D) x 44(H)mm
1.5Kgs
Y: 1 Vp-p @ 75 ohm
C: 0.286 Vp-p @75 ohm
Video:
S-Video:
Analog Audio: (L/R)
1 Vp-p @75 ohm
2Vrms max 47 k ohm
Y: 1 Vp-p @ 75 ohm
C: 0.286 Vp-p @75 ohm
S1
V1
L1
R1
S3
V3
L3
R3
S2
DC 5V
V2L2R2S4V4L4R4
INPUT 1/INPUT 2INPUT 3/INPUT 4OUTPUT
RS232
AUDIO
R
LVS
Adaptor
LCD, Plasma,
or any display
with Video/S-Video
input
DVD DVD
DVD DVD
Connection and Installation