Cypress CLUX-41AT User manual

4-in 1-out HDMI
v1.3 With Digital
Audio Switcher
Operation Manual
CLUX-41AT
1
1. Introduction
Cypress CLUX-41AT is a high performance HDMI v1.3 switcher with separate
digital audio input and output. It allows your various HDMI sources to share one
HDTV display. Simply pressing one button you can select your desired HDMI
source for display on the HDTV, meanwhile the selected digital audio will be
passed through the Toslink (Optical Fiber) or Coaxial channel to play on your
audio amplifier.
2. Features
* HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
* Supports 30/36/48 bit color depth display.
* Supports High Definition audio - Dolby Digital TrueHD and DTS-HD Master
Audio.
* Auto Signal Enhancement feature can improve signal quality after long
distance transmission.
* LED indicators.
* Ideal for home theater integration, conference room and retail stores.
* Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA, UXGA (1600 x 1200) and 1920 x 1200 &
HDTV: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
* Remote control.
* Easy to install and simple to operate.
3. Package Contents
1. Cypress CLUX-41AT
2. 5VDC Power Supply Adaptor
3. Operation Manual
4
4.4 RS-232 Protocol
4.4.1 Pin Definition
* RS-232 transmission format:
Baud Rate: 9600 bps
Data bit: 8 Bits
Parity: None
Stop Bit: 1 bit
4.4.2 Commands
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
Tx
Rx
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
Rx
Tx
NC
GND
NC
NC
NC
NC
CLUX-41AT Remote Control Console


COMMAND
"I" + "1"
"I" + "2"
"I" + "3"
"I" + "4"
"S" + "1"
"S" + "0"
"P" + "1"
"P" + "0"
ACTION
PORT 1 ON
PORT 2 ON
PORT 3 ON
PORT 4 ON
ENABLE SIGNAL ENHANCE
DISABLE SIGNAL ENHANCE
POWER ON
POWER OFF
3
3. Digital audio output:
- Connects the Toslink output to the Toslink input of your display using
optical cable.
- Connects the digital SPDIF output to the digital coaxial input of the
display using coaxial cable.
4. HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the unit
using HDMI cables.
5. Digital audio inputs:
- Connects your various Toslink sources to each of the Toslink input of the
unit using optical cables.
- Connects your various S/PDIF sources to each of the coaxial input of the
unit using coaxial cables.
6. Power:
Plug the supplied 5VDC power supply into the unit.
4.3 Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input
source.
3. Void buttons (No function).
1
2
3
2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. Input select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source
(HDMI/Toslink/Coaxial) and the LED will illuminate to indicate which input
source is being selected.
3. Signal Enhancement/Indicator:
Press the "Signal Enhance" button to turn on this feature to improve signal
quality after long distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
This feature is useful when encountering poor picture quality, if an
appropriate picture quality is displayed, the use of the SIGNAL ENHANCE
button will not produce a visible change.
4. Power LED Indicator:
The LED will illuminate when the power is connected.
4.2 Rear Panel
1. HDMI output:
Connect the HDMI output to the HDMI input of your display using HDMI
cable.
2. RS-232:
Connect the 9-pin D-sub female connector to your other control console
for remote control.
1 2 3 4
1 2 3 4 INPUT SIGNAL ENHANCE
POWER
CLUX-41AT
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
OPTICAL COAXIAL
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
4 3 2 1 4 3 2 1
DC 5V

TABLE OF CONTENTS
1. Introduction.................................................................................1
2. Features.......................................................................................1
3. Package Contents..................................................................... 1
4. Operation Controls and Functions............................................2
4.1 Front Panel.............................................................................2
4.2 Rear Panel............................................................................. 2
4.3 Remote Control.....................................................................3
4.4 RS-232 Protocol..................................................................... 4
4.4.1 Pin Definition................................................................ 4
4.4.2 Commands.................................................................. 4
5. Specifications............................................................................. 5
5.1 General Specification.......................................................... 5
6. Connection and Installation......................................................5
3
3. Digital audio output:
- Connects the Toslink output to the Toslink input of your display using
optical cable.
- Connects the digital SPDIF output to the digital coaxial input of the
display using coaxial cable.
4. HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the unit
using HDMI cables.
5. Digital audio inputs:
- Connects your various Toslink sources to each of the Toslink input of the
unit using optical cables.
- Connects your various S/PDIF sources to each of the coaxial input of the
unit using coaxial cables.
6. Power:
Plug the supplied 5VDC power supply into the unit.
4.3 Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input
source.
3. Void buttons (No function).
1
2
3
2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. Input select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source
(HDMI/Toslink/Coaxial) and the LED will illuminate to indicate which input
source is being selected.
3. Signal Enhancement/Indicator:
Press the "Signal Enhance" button to turn on this feature to improve signal
quality after long distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
This feature is useful when encountering poor picture quality, if an
appropriate picture quality is displayed, the use of the SIGNAL ENHANCE
button will not produce a visible change.
4. Power LED Indicator:
The LED will illuminate when the power is connected.
4.2 Rear Panel
1. HDMI output:
Connect the HDMI output to the HDMI input of your display using HDMI
cable.
2. RS-232:
Connect the 9-pin D-sub female connector to your other control console
for remote control.
1 2 3 4
1 2 3 4 INPUT SIGNAL ENHANCE
POWER
CLUX-41AT
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
OPTICAL COAXIAL
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
4 3 2 1 4 3 2 1
DC 5V

1
1. Introduction
CLUX-41AT is a high performance HDMI v1.3 switcher with separate
digital audio input and output. It allows your various HDMI sources to share one
HDTV display. Simply pressing one button you can select your desired HDMI
source for display on the HDTV, meanwhile the selected digital audio will be
passed through the Toslink (Optical Fiber) or Coaxial channel to play on your
audio amplifier.
2. Features
* HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
* Supports 30/36/48 bit color depth display.
* Supports High Definition audio - Dolby Digital TrueHD and DTS-HD Master
Audio.
* Auto Signal Enhancement feature can improve signal quality after long
distance transmission.
* LED indicators.
* Ideal for home theater integration, conference room and retail stores.
* Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA, UXGA (1600 x 1200) and 1920 x 1200 &
HDTV: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
* Remote control.
* Easy to install and simple to operate.
3. Package Contents
1. CLUX-41AT
2. 5VDC Power Supply Adaptor
3. Operation Manual
3
3. Digital audio output:
- Connects the Toslink output to the Toslink input of your display using
optical cable.
- Connects the digital SPDIF output to the digital coaxial input of the
display using coaxial cable.
4. HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the unit
using HDMI cables.
5. Digital audio inputs:
- Connects your various Toslink sources to each of the Toslink input of the
unit using optical cables.
- Connects your various S/PDIF sources to each of the coaxial input of the
unit using coaxial cables.
6. Power:
Plug the supplied 5VDC power supply into the unit.
4.3 Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input
source.
3. Void buttons (No function).
1
2
3
2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. Input select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source
(HDMI/Toslink/Coaxial) and the LED will illuminate to indicate which input
source is being selected.
3. Signal Enhancement/Indicator:
Press the "Signal Enhance" button to turn on this feature to improve signal
quality after long distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
This feature is useful when encountering poor picture quality, if an
appropriate picture quality is displayed, the use of the SIGNAL ENHANCE
button will not produce a visible change.
4. Power LED Indicator:
The LED will illuminate when the power is connected.
4.2 Rear Panel
1. HDMI output:
Connect the HDMI output to the HDMI input of your display using HDMI
cable.
2. RS-232:
Connect the 9-pin D-sub female connector to your other control console
for remote control.
1 2 3 4
1 2 3 4 INPUT SIGNAL ENHANCE
POWER
CLUX-41AT
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
OPTICAL COAXIAL
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
4 3 2 1 4 3 2 1
DC 5V

2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. Input select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source
(HDMI/Toslink/Coaxial) and the LED will illuminate to indicate which input
source is being selected.
3. Signal Enhancement/Indicator:
Press the "Signal Enhance" button to turn on this feature to improve signal
quality after long distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
This feature is useful when encountering poor picture quality, if an
appropriate picture quality is displayed, the use of the SIGNAL ENHANCE
button will not produce a visible change.
4. Power LED Indicator:
The LED will illuminate when the power is connected.
4.2 Rear Panel
1. HDMI output:
Connect the HDMI output to the HDMI input of your display using HDMI
cable.
2. RS-232:
Connect the 9-pin D-sub female connector to your other control console
for remote control.
1 2 3 4
1 2 3 4 INPUT SIGNAL ENHANCE
POWER
CLUX-41AT
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
OPTICAL COAXIAL
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
4 3 2 1 4 3 2 1
DC 5V

3
3. Digital audio output:
- Connects the Toslink output to the Toslink input of your display using
optical cable.
- Connects the digital SPDIF output to the digital coaxial input of the
display using coaxial cable.
4. HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the unit
using HDMI cables.
5. Digital audio inputs:
- Connects your various Toslink sources to each of the Toslink input of the
unit using optical cables.
- Connects your various S/PDIF sources to each of the coaxial input of the
unit using coaxial cables.
6. Power:
Plug the supplied 5VDC power supply into the unit.
4.3 Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input
source.
3. Void buttons (No function).
1
2
3

4
4.4 RS-232 Protocol
4.4.1 Pin Definition
* RS-232 transmission format:
Baud Rate: 9600 bps
Data bit: 8 Bits
Parity: None
Stop Bit: 1 bit
4.4.2 Commands
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
Tx
Rx
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
Rx
Tx
NC
GND
NC
NC
NC
NC
CLUX-41AT Remote Control Console


COMMAND
"I" + "1"
"I" + "2"
"I" + "3"
"I" + "4"
"S" + "1"
"S" + "0"
"P" + "1"
"P" + "0"
ACTION
PORT 1 ON
PORT 2 ON
PORT 3 ON
PORT 4 ON
ENABLE SIGNAL ENHANCE
DISABLE SIGNAL ENHANCE
POWER ON
POWER OFF

5
5. Specifications
5.1 General Specification
* Frequency bandwidth: 2.25 Gbps (single link)
* Inputs:
4 x HDMI female ports (Type A connector)
4 x Toslink digital audio out
4 x Coaxial digital audio out
* Outputs:
1 x HDMI female port (Type A connector)
1 x Toslink digital audio out
1 x Coaxial digital audio out
* 5VDC power supply
* Weight: 0.85kgs
* Dimension: 240 (W) x 90 (D) x 43 (H)mm
6. Connection and Installation
2007.7.12 MPM-CLUX41AT
DVD 3DVD 3AMPLIFIER
DVD 2
DVD 1
LCD TV
DVD 2 DVD 3
DVD 1
STB
STB
3
3. Digital audio output:
- Connects the Toslink output to the Toslink input of your display using
optical cable.
- Connects the digital SPDIF output to the digital coaxial input of the
display using coaxial cable.
4. HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the unit
using HDMI cables.
5. Digital audio inputs:
- Connects your various Toslink sources to each of the Toslink input of the
unit using optical cables.
- Connects your various S/PDIF sources to each of the coaxial input of the
unit using coaxial cables.
6. Power:
Plug the supplied 5VDC power supply into the unit.
4.3 Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input
source.
3. Void buttons (No function).
1
2
3
2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. Input select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source
(HDMI/Toslink/Coaxial) and the LED will illuminate to indicate which input
source is being selected.
3. Signal Enhancement/Indicator:
Press the "Signal Enhance" button to turn on this feature to improve signal
quality after long distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
This feature is useful when encountering poor picture quality, if an
appropriate picture quality is displayed, the use of the SIGNAL ENHANCE
button will not produce a visible change.
4. Power LED Indicator:
The LED will illuminate when the power is connected.
4.2 Rear Panel
1. HDMI output:
Connect the HDMI output to the HDMI input of your display using HDMI
cable.
2. RS-232:
Connect the 9-pin D-sub female connector to your other control console
for remote control.
1 2 3 4
1 2 3 4 INPUT SIGNAL ENHANCE
POWER
CLUX-41AT
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
OPTICAL COAXIAL
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
4 3 2 1 4 3 2 1
DC 5V

HDMI v1.3 Series:
Product
CLUX-21SY
CLUX-31S
CLUX-31SY
CLUX-41SY
CLUX-42S
CLUX-41AT
CLUX-210T
Description
2x1 HDMI V1.3 Switcher
3x1 HDMI V1.3 Switcher
3x1 HDMI V1.3 Switcher
4x1 HDMI V1.3 Switcher
4x2 HDMI V1.3 Switcher
4x1 HDMI V1.3 Switcher with Digital Audio
2x10 HDMI V1.3 Splitter with Digital Audio
TABLE OF CONTENTS
1. Introduction.................................................................................1
2. Features.......................................................................................1
3. Package Contents..................................................................... 1
4. Operation Controls and Functions............................................2
4.1 Front Panel.............................................................................2
4.2 Rear Panel............................................................................. 2
4.3 Remote Control.....................................................................3
4.4 RS-232 Protocol..................................................................... 4
4.4.1 Pin Definition................................................................ 4
4.4.2 Commands.................................................................. 4
5. Specifications............................................................................. 5
5.1 General Specification.......................................................... 5
6. Connection and Installation......................................................5
5
5. Specifications
5.1 General Specification
* Frequency bandwidth: 2.25 Gbps (single link)
* Inputs:
4 x HDMI female ports (Type A connector)
4 x Toslink digital audio out
4 x Coaxial digital audio out
* Outputs:
1 x HDMI female port (Type A connector)
1 x Toslink digital audio out
1 x Coaxial digital audio out
* 5VDC power supply
* Weight: 0.85kgs
* Dimension: 240 (W) x 90 (D) x 43 (H)mm
6. Connection and Installation
2007.7.12 MPM-CLUX41AT
DVD 3DVD 3AMPLIFIER
DVD 2
DVD 1
LCD TV
DVD 2 DVD 3
DVD 1
STB
STB
1
1. Introduction
Cypress CLUX-41AT is a high performance HDMI v1.3 switcher with separate
digital audio input and output. It allows your various HDMI sources to share one
HDTV display. Simply pressing one button you can select your desired HDMI
source for display on the HDTV, meanwhile the selected digital audio will be
passed through the Toslink (Optical Fiber) or Coaxial channel to play on your
audio amplifier.
2. Features
* HDMI 1.3, HDCP 1.1 and DVI 1.0 compliant.
* Supports 30/36/48 bit color depth display.
* Supports High Definition audio - Dolby Digital TrueHD and DTS-HD Master
Audio.
* Auto Signal Enhancement feature can improve signal quality after long
distance transmission.
* LED indicators.
* Ideal for home theater integration, conference room and retail stores.
* Supports high resolution input:
PC: VGA, SVGA, XGA, SXGA, UXGA (1600 x 1200) and 1920 x 1200 &
HDTV: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p
* Remote control.
* Easy to install and simple to operate.
3. Package Contents
1. Cypress CLUX-41AT
2. 5VDC Power Supply Adaptor
3. Operation Manual
4
4.4 RS-232 Protocol
4.4.1 Pin Definition
* RS-232 transmission format:
Baud Rate: 9600 bps
Data bit: 8 Bits
Parity: None
Stop Bit: 1 bit
4.4.2 Commands
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
Tx
Rx
NC
GND
NC
NC
NC
NC
PIN
1
2
3
4
5
6
7
8
9
Definition
NC
Rx
Tx
NC
GND
NC
NC
NC
NC
CLUX-41AT Remote Control Console


COMMAND
"I" + "1"
"I" + "2"
"I" + "3"
"I" + "4"
"S" + "1"
"S" + "0"
"P" + "1"
"P" + "0"
ACTION
PORT 1 ON
PORT 2 ON
PORT 3 ON
PORT 4 ON
ENABLE SIGNAL ENHANCE
DISABLE SIGNAL ENHANCE
POWER ON
POWER OFF
3
3. Digital audio output:
- Connects the Toslink output to the Toslink input of your display using
optical cable.
- Connects the digital SPDIF output to the digital coaxial input of the
display using coaxial cable.
4. HDMI inputs:
Connect your various HDMI sources to each of the HDMI input of the unit
using HDMI cables.
5. Digital audio inputs:
- Connects your various Toslink sources to each of the Toslink input of the
unit using optical cables.
- Connects your various S/PDIF sources to each of the coaxial input of the
unit using coaxial cables.
6. Power:
Plug the supplied 5VDC power supply into the unit.
4.3 Remote Control
1. Power:
Press the button to turn on/off the unit.
2. Direct input selector:
Press 1, 2, 3 or 4 to select the desired input
source.
3. Void buttons (No function).
1
2
3
2
4. Operation Controls and Functions
4.1 Front Panel
1. Remote control sensor.
2. Input select/Indicators:
Press the "INPUT" button repeatedly to switch to your desired input source
(HDMI/Toslink/Coaxial) and the LED will illuminate to indicate which input
source is being selected.
3. Signal Enhancement/Indicator:
Press the "Signal Enhance" button to turn on this feature to improve signal
quality after long distance transmission. Press again to turn off. The LED will
illuminate when the signal is enhanced.
This feature is useful when encountering poor picture quality, if an
appropriate picture quality is displayed, the use of the SIGNAL ENHANCE
button will not produce a visible change.
4. Power LED Indicator:
The LED will illuminate when the power is connected.
4.2 Rear Panel
1. HDMI output:
Connect the HDMI output to the HDMI input of your display using HDMI
cable.
2. RS-232:
Connect the 9-pin D-sub female connector to your other control console
for remote control.
1 2 3 4
1 2 3 4 INPUT SIGNAL ENHANCE
POWER
CLUX-41AT
4x1 HDMI/Digital Audio Switcher
HDMI 1.3/2.25G
1 4
3 5
62
RS-232 OUT OPTICAL IN COAXIAL IN
OPTICAL COAXIAL
HDMI OUT HDMI IN 4 HDMI IN 3 HDMI IN 2 HDMI IN 1
4 3 2 1 4 3 2 1
DC 5V