DO NOT expose your amplifier to excessive cold or heat, direct sunlight,
humidity or water.
DO NOT use any chemicals for cleaning your Cyrus amplifier. Only a
slightly damp, soft cloth should be used.
The original packing should be retained and always used when transporting
the unit.
INSTALLATION
MAINS SUPPLY
A label at the rear of your Cyrus amplifier shows the appropriate mains
supply voltage and fuse rating of the unit. If the Tnains supply voltage in
your area is different, contact your dealer or a Mission service organisation.
The amplifier is connected to the mains supply via an IEC socket and the
mains cable. The IEC socket has an integral mains fuse. When connecting
the mains supply, ensure that the cable is connected to the amplifier first.
MAINS CABLE
The mains cable supplied with the unit is a three core type, and has an
integral plug attached. Units supplied for the UK market do not have a
mains plug, and therefore, an appropriate plug must be wired according to
the colour-code below and on the label attached to the lead.
All types of mains lead supplied (all countries), have a moulded IEC plug
which matches the IEC socket of your amplifier.
FITTING A MAINS PLUG (UK ONLY)
The mains supply cable should be attached to a standard 13 Amp mains
plug fitted with a 3 Amp fuse.
The wires in the mains supply cable are colour coded as follows;
•BROWN = Live
