D-Link DUB-C2 User manual

2-Port USB 2.0
Cardbus Adapter
DUB-C2DUB-C2
DUB-C2DUB-C2
DUB-C2
This product can be used with the
following operating systems:
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SEWindows XP, Me, 2000, 98SE
Windows XP, Me, 2000, 98SE
Macintosh OS v10.1Macintosh OS v10.1
Macintosh OS v10.1Macintosh OS v10.1
Macintosh OS v10.1
CheckYourPackageContents
These are the items included with your purchase:
If any of the below items are missing, please contact your reseller.
Before You Begin
You must have at least the following:
•Windows XP/Me/2000/98SE or Macintosh OS v10.1
•Pentium Class CPU or Higher
•One Available 32-bit Cardbus Slot
•CD-ROM Drive
• DUB-C2 Hi-Speed USB 2.0 Notebook
Cardbus Adapter
• CD-ROM (containing Drivers,
Installation Guide and Warranty)
Run the Driver CD before you install the DUB-C2.
The Driver CD contains an installation program that
significantly simplifies your installation process.
Windows Users

If the Autorun screen does not automatically start, click on Start > Run, enter
“D:\Autorun.exe” and click OK. “D” represents the letter of your CD-ROM drive.
Replace it if your CD-ROM drive is a different letter.
Only Windows XP users
will see this screen.
Insert the D-Link CD-ROM
Into Your Computer
Mac users please proceed to
the last section of this guide.
Turn on your computer and
insert the D-Link DUB-C2
Driver CD in the CD-ROM drive.
Only Windows 98 users
will see this screen.
Click Next
Click Install Driver
Click Continue Anyway

Installing The DUB-C2 USB 2.0 Cardbus
Adapter Into Your Computer
Turn On your computer.
Select No and
Shut Down Your
Computer
Make sure your computer is completely
turned OFF before installing the DUB-C2.
Locate an available
cardbus slot and insert
the DUB-C2 into the
cardbus slot.

Windows XP Users
CompletingTheDriverInstallation
Follow these steps to complete installation under Windows XP for
each device that Windows prompts you to install.
Click Continue Anyway
Click Next
Click Finish

Windows 2000 & Me Users
The DUB-C2 driver installation will proceed automatically for Windows
2000 & Me users while Windows is starting.
Windows XP Users
Click Next
Click Continue Anyway
Click Finish

Windows 98SE Users
Follow these steps to complete installation under Windows 98. You
will have to repeat these steps twice.
Click Next
Select only
CD-ROM
drive
Click Next
Click Next

Windows 98SE Users
If prompted, Restart Your
Computer to complete the installation.
Windows 98 may prompt
you for the Windows 98
Setup disk. If prompted,
insert the Windows 98
Setup disk and select OK.
Click Next
Click Next
Click Finish

Macintosh OS X 10.1 Users
Follow these steps to complete installation under Macintosh OS X 10.1.
Double-click DUB-C2 when it
appears on the desktop
Double-click
USB2EHCI_V1033 when
it appears on the desktop
Insert the DUB-C2 Driver CD
into the CD-ROM drive.
Drag-&-drop
USB2EHCI_V1033_1130.img
to the desktop
Double-click
USB2EHCI-
V1033_1130.IMG
from the
desktop
Double-click
USB2EHCI_V1033.pkg

Macintosh OS X 10.1
Enter your Name
& Password
Click the Lock
Click Continue
Click OK

Macintosh OS X 10.1
Click Continue
Select a
Destination
Volume
Click Install
Click Continue
Installation