D-Link DUB-E130 User manual

Version 1.00 | 02/27/2018
User Manual
USB Type-C to Gigabit Ethernet Adapter
DUB-E130

iD-Link DUB-E130 User Manual
Manual Overview
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any
person or organization of such revisions or changes. Information in this document may become obsolete as our services and
websites develop and change. Please refer to your local D-Link website for the most current information.
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United
States or other countries. All other company or product names mentioned herein are trademarks or registered trademarks of
their respective companies.
Apple®, Apple logo®, Safari®, iPhone®, iPad®, iPod touch® and Macintosh® are trademarks of Apple Inc., registered in the U.S.
and other countries. App StoreSM is a service mark of Apple Inc.
Internet Explorer®, Windows® and the Windows logo are trademarks of the Microsoft group of companies.
Copyright © 2018 by D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission
from D-Link Corporation.

iiD-Link DUB-E130 User Manual
Table of Contents
Package Contents.................................................................................1
System Requirements......................................................................... 1
Introduction ........................................................................................... 2
Features ...................................................................................................3
Hardware Overview............................................................................. 4
Software Installation...........................................................................5
Windows 10/8.................................................................................5
Windows 7....................................................................................... 6
Windows Vista................................................................................ 7
Windows XP.................................................................................... 8
Mac OS X........................................................................................10
Table of Contents
Connecting the Adapter to a Network.......................................11
Completing the Installation............................................................12
Troubleshooting .................................................................................13
Technical Specications...................................................................15
Safety Statements...............................................................................16

1D-Link DUB-E130 User Manual
Section 1 - Product Overview
DUB-E130 USB Type-C to Gigabit Ethernet Adapter
CD-ROM with DUB-E130 Drivers and User Manual
Quick Installation Guide
Package Contents
System Requirements
System Requirements
Computer with the following:
• Microsoft Windows® 10/8/7/Vista®/XP or Mac OS X 10.6 or above
• Pentium 2.0 GHz or higher with a minimum of 32 MB RAM
• Available USB Type-C port
• CD-ROM drive
If any of the above items are missing or damaged, please contact your reseller.

2D-Link DUB-E130 User Manual
Section 1 - Product Overview
Introduction
Thank you for choosing the D-Link DUB-E130 USB Type-C to Gigabit Ethernet Adapter. The DUB-E130 is specically designed
to plug into an available Universal Serial Bus (USB) Type-C port on a computer running Microsoft Windows 10/8/7/Vista/XP,
Mac OS X 10.6 or above. Based on the USB 3.0 standard, the DUB-E130 extends the transfer speed of earlier USB Fast Ethernet
adapters to true 1 Gbps connectivity. Power to the DUB-E130 is provided directly by the USB port, eliminating the need for an
external power adapter. It also supports USB energy-saving suspend and resume functions to minimize power consumption,
which is especially useful for laptop/notebook users.

3D-Link DUB-E130 User Manual
Section 1 - Product Overview
Features
Designed for versatility and performance, the DUB-E130 USB Type-C to Gigabit Ethernet Adapter has the following features:
• USB Type-C 3.0 connector to RJ-45 connector
• True 1 Gbps network connectivity
• Compliance with the IEEE 802.3ab gigabit Ethernet and IEEE 802.3u Fast Ethernet standards
• Plug-and-Play installation (operating system dependent)
• Auto 10/100/1000 Mbps speed detection
• Auto-negotiation to the highest available speed
• Two LED indicators: Connection Speed, Link/ACT
• Driver support:
• Microsoft Windows 10
• Microsoft Windows 8
• Microsoft Windows 7
• Microsoft Windows Vista
• Microsoft Windows XP
• Macintosh OS X (10.6 or above)

4D-Link DUB-E130 User Manual
Section 1 - Product Overview
Hardware Overview
ID COMPONENT DESCRIPTION
1 Ethernet Port Plug an Ethernet cable from a switch or router into this port.
2USB Type-C Connector Plug this connector into a USB Type-C port on your computer.
1
2

5D-Link DUB-E130 User Manual
Section 2 - Installation
Software Installation
Insert the CD included with the DUB-E130 into your computer’s DVD or CD drive, then proceed to the appropriate installation
section on the following pages according to your operating system.
Note: If the user interface does not start up, please go to the Autorun folder on the CD-ROM and open Autorun.exe manually.
Windows 10 and 8
The Windows 10 and 8 operating systems support plug-and-play functionality. No software installation or conguration is
necessary. Simply plug the DUB-E130 into your computer’s USB Type-C port when ready.

6D-Link DUB-E130 User Manual
Section 2 - Installation
When the InstallShieldWizard is completed, plug the DUB-E130 into your PC
and the driver software installation will be completed automatically.
When theWindows 7 driver installation is complete, proceed to ”Connecting
the Adapter to a Network”on page 11.
After you have inserted the CD into the CD drive, the DUB-E130 user interface
menu screen will appear. Click on Install to begin the DUB-E130 driver
installation.The InstallShield Wizard will then pop up and run automatically.
Note: The DUB-E130 user interface may dier in appearance depending on
your region.
Windows 7

7D-Link DUB-E130 User Manual
Section 2 - Installation
Windows Vista
After you put the CD into the CD drive, the DUB-E130 user interface menu
screen will appear. Click on Install to begin the DUB-E130 driver installation.
The InstallShield Wizard will then pop up.
This driver is not WHQL signed. If you receive a warning message, you will
have to accept the unsigned driver installation in order to continue.Windows
Vista x64 user will need to disableWHQL checking in order to install the driver.
Note: The DUB-E130 user interface may dier in appearance for dierent
regions.
Plug the DUB-E130 into your computer and the driver software installation
will be completed automatically.
When theWindowsVista driver installation is complete, you can connect the
DUB-E130 to a USB Type-C port on your computer. Please then proceed to
”Connecting the Adapter to a Network”on page 11.

8D-Link DUB-E130 User Manual
Section 2 - Installation
After you put the CD into the CD drive, the DUB-E130 user interface menu
screen will appear. Click on Install to begin the DUB-E130 driver installation.
The InstallShield Wizard will then pop up.
This driver is not WHQL signed. If you receive a warning message, you will
have to accept the unsigned driver installation in order to continue.Windows
XP x64 user will need to disableWHQL checking in order to install the driver.
Note: The DUB-E130 user interface may dier in appearance for dierent
regions.
Windows XP
Plug the DUB-E130 into your PC.

9D-Link DUB-E130 User Manual
Section 2 - Installation
Choose Install the software automatically and click Next to continue.
The Found New Hardware box will appear. Select Yes, this time only and
click Next to continue.

10D-Link DUB-E130 User Manual
Section 2 - Installation
When the Windows XP driver installation is complete, you can connect
the DUB-E130 to a USB port on your computer. Please then proceed to
“Connecting the Adapter to a Network”on page 11.
Mac OS X
The Mac OS 10.11.6 and above operating systems support Plug-and-Play functionality. No conguration or installation should
be necessary. Simply plug the DUB-E130 into your computer’s USB Type-C port when ready.

11D-Link DUB-E130 User Manual
Section 2 - Installation
Attach an Ethernet cable to the Ethernet port on the DUB-E130.
Attach the other end of the Ethernet cable to your network switch or router. If your switch or router has ports with Gigabit
capability, you should use these ports in order to achieve maximum data transfer speeds.
Connecting the Adapter to a Network

12D-Link DUB-E130 User Manual
Section 2 - Installation
When the installation of the DUB-E130 is complete, the Connection Speed LED will illuminate solid orange when the DUB-E130
is connected to a 1 Gbps network and remains o when connected to a 10/100 Mbps network. The Link/ACT LED will be solid
green when a connection is present, and ash green when data is being transmitted or received. If both LEDs are unlit, there
may be a problem with the physical connection. Check the connection and cables between the DUB-E130 and your hub,
switch, or router. Also verify that your network switch or router is powered on.
Completing the Installation
ID Indication Status Description
1 Connection Speed
Solid 1 Gbps connection present
O 10/100 Mbps connection present
2 Link/ACT
Solid An active connection is present
Flashing Data is being transmitted/received
12

13D-Link DUB-E130 User Manual
Section 3 - Troubleshooting
Troubleshooting
Do I need to use a crossover cable or straight-through cable?
With most of D-Link’s switches and routers, the Ethernet ports are Auto MDI/MDI-X. This means the port will auto-detect the
cable type. Auto MDI/MDI-X ports may react dierently if the Ethernet cable is not properly pinned. If you make your own
cables, it is very important that they follow the industry standard pin-out (568A and 568B).
Computer connections to a switch or router typically use a straight-through cable. When connecting a computer to another
computer or to an uplink port then a cross-over cable is typically required. Rule of thumb: ”If there is a link light, the cable is
right.”
Why isn’t my DUB-E130 achieving 1 Gbps speeds?
1 Gbps (1,000 Mbps) is the theoretical maximum speed of the Gigabit Ethernet standard, and actual speeds may vary. Gigabit
connectivity is dependent on a number of factors, and just one weak link in your network can reduce data speeds. If you are
not achieving Gigabit speeds, you should check the following:
• Ensure that the DUB-E130 is plugged in to a USB 3.0 port, and that the drivers for this port are correctly installed.
• Check your network cable. A cable of specication CAT 5e or above is required for Gigabit speeds, with a maximum
length of 100 metres. Also check the cable for damage, or wear and tear.
• If you are connected to a switch or router, ensure that this device is also Gigabit-capable.
• Network congestion can also aect data rates. Slower speeds may be due to heavy data trac elsewhere on the network.

14D-Link DUB-E130 User Manual
Section 3 - Troubleshooting
How do I verify that my DUB-E130 is properly installed?
Windows
You can verify that the adapter has been properly installed in Device Manager by following these steps:
• Right-click on the My Computer icon and select Properties.
- For Windows XP: Go to the Hardware tab and click on the Device Manager button
- For Windows Vista: Click on the Device Manager item under the Tasks group.
- For Windows 7: Click on the Device Manager link in the left-hand frame of the window.
- For Windows 8: Use the search function to search for “Control Panel.” Once located, open the control panel and
choose the System and Security group. Next, click on the Device Manager link under System.
- For Windows 10: Click on the Device Manager link in the left-hand frame of the window.
• Expand the Network Adapters heading by clicking on the plus (+) sign next to Network Adapters.
• Right-click on the My Computer icon and select Properties.
• The D-Link USB DUB-E130 should appear with a green and gold network adapter symbol.
• If the D-Link USB DUB-E130 in Device Manager appears with a bright yellow exclamation mark or a red x, there may be
a hardware conict present.
Mac
• Click the Apple icon on the task bar, select System Preferences, and then click the Network icon.
• You will find that a new Ethernet network interface is available. It is usually named Ethernet Adapter (en1) or Ethernet
Adapter (en2).

15D-Link DUB-E130 User Manual
Appendix A - Technical Specications
Technical Specications
Firmware Specications
OPERATING SYSTEM
• Microsoft Windows 10/8/7/Vista/XP
• Mac OS X 10.6 or higher
Hardware Specications
PACKAGE CONTENTS
• DUB-E130 USB Type-C to Gigabit Ethernet Adapter
• Quick Installation Guide
• CD-ROM with:
- Drivers
- Manual
STANDARDS
• USB Specication Version 3.0
• USB Specication Version 2.0
• USB Specication Version 1.1
• OHCI (Open Host Controller Interface)
• EHCI (Enhanced Host Controller Interface)
• IEEE 802.3 Ethernet
• IEEE 802.3u Fast Ethernet
• IEEE 802.3ab Gigabit Ethernet
• Supports suspended mode and remote wakeup
• Supports full duplex in Gigabit Ethernet mode
• Wake-On-Lan support
PORTS/CONNECTORS
• USB Type-C
• RJ-45 (10/100/1000 Mbps)
DIAGNOSTIC LEDS
• Connection Speed
• Link/ACT
POWER
• Bus powered 500MA @ 5 V DC
DIMENSIONS (W X D X H)
• 205 x 26.5 x 15 mm (8.07 x 1.04 x 0.59 inches)
WEIGHT
• 28 g (1 ounce)
OPERATING TEMPERATURE
• Operating: 0 ˚ to 45 ˚C (32 ˚ to 113 ˚F)
• Storage: -20 ˚ to 70 ˚C (-4 ˚ to 158 ˚F)
HUMIDITY
• Operating: 20% to 80% (non-condensing)
• Non-operating: 5% to 90% (non-condensing)
CERTIFICATIONS
• CE
• FCC

16D-Link DUB-E130 User Manual
Appendix B: Safety Statements
Safety Statements
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to
correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Non-modications Statement:
Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this
equipment.
Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Innovation, Science and Economic Development Canada (ISED) Statement:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

17D-Link DUB-E130 User Manual
Appendix B: Safety Statements
SAFETY INSTRUCTIONS
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage.
Remember to consult the product user instructions for more details.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal)
before touching the product.
• Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read
and follow the instructions in the user manual.
• Do not spill food or liquid on your product and never push any objects into the openings of your product.
• Do not use this product near water, areas with high humidity, or condensation unless the product is specically rated for outdoor application.
• Keep the product away from radiators and other heat sources.
• Always unplug the product from mains power before cleaning and use a dry lint free cloth only.
SICHERHEITSVORSCHRIFTEN
Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewährleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts.
Weitere Details nden Sie in den Benutzeranleitungen zum Produkt.
• Statische Elektrizität kann elektronischen Komponenten schaden. Um Schäden durch statische Auadung zu vermeiden, leiten Sie
elektrostatische Ladungen von Ihrem Körper ab,
(z. B. durch Berühren eines geerdeten blanken Metallteils), bevor Sie das Produkt berühren.
• Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Für einige Produkte mit
austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen.
• Vermeiden Sie, dass Speisen oder Flüssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstände in die Gehäuseschlitze oder
-önungen Ihres Produkts.
• Verwenden Sie dieses Produkt nicht in unmittelbarer Nähe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation,
es sei denn, es ist speziell zur Nutzung in Außenbereichen vorgesehen und eingestuft.
• Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen.
• Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies
Tuch.