D-Link DUB-E100 User manual

©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
Software and specications subject to change without notice. DUB-E100.006152004
If any of the above items are missing, please contact your reseller.
CD-ROM (Software, Manual and Warranty)
DUB-E100 USB 2.0 Fast Ethernet Adapter
Check Your Package Contents
USB 2.0 Fast
Ethernet Adapter
DUB-E100
The DUB-E100 supports drivers for the following operating systems:
Microsoft Windows Vista (x86 ,x64)
Microsoft Windows XP (x32/x64 Edition)
Microsoft Windows Server 2003 (x32/x64 Edition)
Microsoft Windows 2000
Linux (kernel 2.6.9~13)
Linux (kernel 2.6.14 & above)
Mac OS (10.x)
Windows 98SE/ME

2
Connecting the DUB-E100 to Your
Computer
Plug the DUB-E100’s USB cable
into an available USB port on your
computer.
Windows will detect new hardware
and prompt you for the drivers.
Follow the steps below and then
proceed to the Driver Installation
section on the following pages.
Attach an Ethernet cable to the
Ethernet port on the DUB-E100.
Attach the other end of the Ethernet
cable to your network switch, hub,
or router.

3
Installing the Drivers
Windows Vista x64/86
Windows Vista driver installation is complete. Now you may connect the DUB-E100 to a
network using an Ethernet cable.
Select Locate and install driver
software (recommended)
Make sure the provided CD-ROM is
placed in your disc drive.
If your computer is connected to the
Internet, please disconnect the connection
temporarily to prevent the wizard searching
for drivers via Windows Update feature.
Click Next
Click Close

4
Installing the Drivers
Select Search for the best driver in
these locations.
Select Include this location in the
search: and then click Browse to
navigate to x:\Drivers\Win XP\64Bit
(where x:represents your CD-ROM
drive letter).
Select Install from a list or
specic location (Advanced)
Click Next
Click Next
Windows XP
For Windows XP 64 Edition
For Windows XP 32 Edition
Select Search for the best driver in
these locations.
Click Next
Select Include this location in the
search: and then click Browse to
navigate to x:\Drivers\Win XP\32Bit
(where x:represents your CD-ROM
drive letter).

5
Click Finish
Windows XP driver installation is complete. Now you may connect the DUB-E100 to a
network using an Ethernet cable.
Installing the Drivers (continued)

6
Click Next
Select Specify a location
Installing the Drivers (continued)
Windows 2000
Select Search for a suitable driver
for my device (recommended)
Click Next
Click Next

7
Installing the Drivers (continued)
Click Next
Click Browse and navigate to
x:\Drivers\Win2K (where x:
represents your CD-ROM drive letter).
Click Finish
Windows 2000 driver installation is complete. Now you may connect the DUB-E100 to a
network using an Ethernet cable.

8
Select Search for the best driver
in these locations
Select Include this location in the
search: and then click Browse to navigate
to x:\Drivers\Win2003\32BIT (where x:
represents your CD-ROM drive letter).
Click Next
For Windows Server 2003 x32 Edition
Installing the Drivers (continued)
Windows 2003
Click Next
Select Install from a list or
specic location (Advanced)
Select Search for the best driver
in these locations
Select Include this location in the
search: and then click Browse to navigate
to x:\Drivers\Win2003\64BIT (where x:
represents your CD-ROM drive letter).
Click Next
For Windows Server 2003 x64 Edition

9
Installing the Drivers (continued)
Click Continue Anyway
Click Continue Anyway
Click Finish
Windows Server 2003 driver installation is complete. Now you may connect the DUB-E100
to a network using an Ethernet cable.

10
Click Next
Installing the Drivers (continued)
Select Specify a location: and type
D:\Drivers\Win98ME (where D:
represents your CD-ROM drive letter).
Click Next
Select Search for the best driver
for your device (Recommended)
Select Specify the location
of the driver (Advanced)
Click Next
Windows Me

11
Installing the Drivers (continued)
Click Finish
Windows Me driver installation is complete. Now you may connect the DUB-E100 to a
network using an Ethernet cable.

12
Installing the Drivers (continued)
Select Search for the best driver
for your device (Recommended)
Click Next
Click Next
Select Specify a location: and type
D:\Drivers\Win98ME (where D:
represents your CD-ROM drive letter).
Click Next
Windows 98SE

13
Click Next
Click Finish
Installing the Drivers (continued)
If prompted, restart your computer to complete the installation.
Windows 98 driver installation is complete.
Windows begins copying the necessary
files onto your computer. You may be
prompted to provide the original Windows
98SE CD-ROM. If so, insert the CD-ROM
and click OK. If necessary, provide the
path to the CD-ROM, such as D:\WIN98
(where D: is your CD-ROM drive letter).

14
Installing the Drivers (continued)
Mac OS X Users
Double click the CD-ROM
icon on the desktop and
navigate to \Drivers\MAC.
The following screen shots were taken from Mac OS 10.3 but the steps are similar in other
versions of OS X. Your operating system must be version 10.1 or above.
Double-click DUBE100B.pkg
Click Continue

15
Installing the Drivers (continued)
Select a Destination Volume
Click Continue
Click Install
Click OK
Enter the name and password of a
user with administrative rights.

16
Installing the Drivers (continued)
Click Continue Installation
Click Restart
Click OK
After the restart, plug the DUB-E100’s USB cable into an available USB port on your
computer. Then attach one end of an Ethernet cable to the Ethernet port on the DUB-E100
and the other end to your netwrok switch, hub or router.
Mac system will detect the new hardware and show the name of the adapter, e.g. Ethernet
Adapter (en1) in the example below .

17
Installing the Drivers (continued)
To congure the network settings of DUB-E100, click the Apple icon and select System
Preferences. Then double-click the Network icon.
Select the adapter
representing DUB-E100.
Congure the network
settings as required by
your network.
Click Apply Now
Select Network Status
Select the adapter
representing DUB-E100.
Click Connect

18
Installing the Drivers (continued)
Linux 2.6.14
This driver is designed for Kernel 2.6.14.x or above. To compile the provided Linux driver,
you need the Linux 2.6 Kernel source. Also, please make sure the kernel is built with
“Support for Host-side, EHCI, OHCI, and UHCI” option.
1. Insert the driver CD-ROM into the CD-ROM drive of your computer and go to the
Drivers\Linux\ directory.
2. Copy the LINUX2.6.14_REV101 folder to your temporary directory.
3. Go to the LINUX2.6.14_REV101 folder and execute the following command to
compile the driver.
[root@localhost linux2.6.14_rev101]# make
4. If compiling without errors, asix.ko will be created under the current directory.
5. If you want to use modprobe command to mount the driver, execute the following
command to install the driver on your Linux.
[root@localhost linux2.6.14_rev101]# make install
To mount the driver , go to the LINUX2.6.14_REV101 directory and execute the following
command:
[root@localhost linux2.6.14_rev101]# insmod usbnet
[root@localhost linux2.6.14_rev101]# insmod asix.ko
or
[root@localhost anywhere]# modprobe asix
To unmount the driver, just type the following command:
[root@localhost anywhere]# rmmod asix
[root@localhost anywhere]# rmmod usbnet

19
Installing the Drivers (continued)
Linux 2.6.9
This driver is designed for Kernel 2.6.x to 2.6.13. To compile the provided Linux driver, you
need the Linux 2.6 Kernel source. Also, please make sure the kernel is built with “Support
for Host-side, EHCI, OHCI, and UHCI” option.
1. Insert the driver CD-ROM into the CD-ROM drive of your computer and go to the
Drivers\Linux\ directory.
2. Copy the LINUX2.6.9_REV111 folder to your temporary directory.
3. Go to the LINUX2.6.9_REV111 folder and execute the following command to
compile the driver.
[root@localhost linux2.6.9_rev111]# make
4. If compiling without errors, usbnet.ko will be created under the current directory.
5. If you want to use modprobe command to mount the driver, execute the following command
to install the driver on your Linux.
[root@localhost linux2.6.9_rev111]# make install
To mount the driver , go to the LINUX2.6.9_REV111 directory and execute the following
command:
[root@localhost linux2.6.9_rev111]# insmod usbnet
or
[root@localhost anywhere]# modprobe usbnet
To unmount the driver, just type the following command:
[root@localhost anywhere]# rmmod usbnet

20
Installation is Complete!
Installation of the DUB-E100 is complete. The LINK LED should be solid green,
indicating a good physical connection between the DUB-E100 and the network.
The TX/RX LED indicates when data is being transmitted or received. If both LEDs
are unlit, there may be a problem with the physical connection. Check the cables
between your DUB-E100, the computer, and the network. Verify that your network
switch, hub, or router is powered on.
LINK LED:
Lights up solid green when the
DUB-E100 has a good physical
connection to the network.
TX/RX LED:
Flashes green when data is
transmitted/received at 100Mbps.
When data is transmitted/received
at 10Mbps the LED ashes amber.