D-Link PersonalAir DBT-120 User manual

Personal Air
™Bluetooth
USB Adapter
DBT-120DBT-120
DBT-120DBT-120
DBT-120
This product works with theThis product works with the
This product works with theThis product works with the
This product works with the
following operating systems:following operating systems:
following operating systems:following operating systems:
following operating systems:
Windows XP, Me, 2000, 98 SecondWindows XP, Me, 2000, 98 Second
Windows XP, Me, 2000, 98 SecondWindows XP, Me, 2000, 98 Second
Windows XP, Me, 2000, 98 Second
Edition, Macintosh OS X v10.2Edition, Macintosh OS X v10.2
Edition, Macintosh OS X v10.2Edition, Macintosh OS X v10.2
Edition, Macintosh OS X v10.2
CheckYourPackageContents
These are the items included with your purchase:
BeforeYouBegin
You must have at least the following:
•Windows XP/Me/2000/98SE or Macintosh OS X v10.2
•One Available USB Port
•CD-ROM Drive
• DBT-120 USB Bluetooth Adapter
• CD-ROM (containing Drivers,
Installation Guide, Manual,
and Warranty)
• USB Extension Cable
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of
their respective holders. Software and specifications subject to change without notice. DBT-120.06132003
If any of the above items are missing, please contact your reseller.

2
Click Install
Bluetooth
Software
Click Next
Installing the Bluetooth Software
forWindows
Insert the D-Link PersonalAir
DBT-120 Driver CD in the CD-
ROM drive.
Click Next
Install the driver and
software on the D-Link
CD BEFORE installing the
DBT-120 USB Bluetooth
Adapter into your computer.
If this Autorun screen does not
automatically appear, click on Start >
Run, enter “D:\Autorun.exe” and
click OK. “D” represents the letter of
your CD-ROM drive.
Click Accept

3
Click Install
Click OK
Installing the Bluetooth Software
for Windows (continued)
Click Next
Only Windows XP and
Windows 2000 Users
will see this screen.

4
When this screen appears,
connect the DBT-120 to an
available USB port on your
USB host adapter or USB hub.
Installing the Bluetooth Software
for Windows
(continued)
Click OK
Click OK
A 32-digit security code is
included with your DBT-120 and
is located on your driver CD
cover *. Carefully enter the
security code to access the
software**.
*If you have misplaced or lost the security code included with your
DBT-120, you can obtain the security code from this site: http://66.45.42.85/
dlink/. You will be asked for your DBT-120’s BD Address, which is a unique
12-digit number that identifies your product. The BD Address is located in
the MAC: field on the label of the DBT-120. Once you fill out the required
information on the webpage and submit your request, the security code will be
emailed to you.
**If you cannot access your DBT-120 using the software, the security code
was entered incorrectly. Please refer to the Troubleshooting section of the
manual on this CD for help.

5
Using the Bluetooth Configuration
Wizard
After you have completed the driver and software installation and
reboot your computer, a Bluetooth icon will appear on your desktop
and in the bottom right hand corner of your desktop screen (systray).
The Bluetooth icon gives you access to My Bluetooth Places, for
configuring your Bluetooth settings.
Double-click the Bluetooth icon
for access to My Bluetooth
Places.
Installing the Bluetooth Software
for Windows
(continued)
Click Yes
Click Finish
Only Windows 2000,
Windows Me, and
Windows 98SE Users will
see this screen.

6
Click Next
Type a unique name for
your Computer. Select
Desktop or Laptop
Click Next
Using the Bluetooth Configuration
Wizard
(continued)
Click Next
The Bluetooth Configuration
Wizard launches the first time
that you double click on My
Bluetooth Places.

7
Using the Bluetooth Configuration
Wizard
(continued)
Click Next
Select the Services that your
DBT-120 will provide to other
Bluetooth products.
Click Skip
Click Finish
You can choose to configure
your other Bluetooth devices at
this point. Otherwise, click Skip
to finish the configuration for
your DBT-120.

8
DBT-120InstallationforMacintosh
OS X v 10.2
Macintosh OS X 10.2 has built-in Bluetooth support for a true plug and play
experience. Simply insert the D-Link DBT-120 Bluetooth USB Adapter
into an available USB port on your Macintosh OS X v10.2 and the installa-
tion will proceed automatically.
The Installation is Complete!
The DBT-120 Bluetooth USB Adapter is now able to connect to other
Bluetooth devices and your setup is complete! For detailed explanations
on using the Bluetooth software for Windows and troubleshooting tips,
please refer to the DBT-120 Manual on the CD included with this product.
Insert the DBT-120
into an available USB
port on your
Macintosh desktop or
laptop.

Technical Support
You can find software updates and user documentation on the D-Link website.
D-Link provides free technical support for customers within the United States and
within Canada for the duration of the warranty period on this product.
U.S. and Canadian customers can contact D-Link Technical Support through our
website, or by phone.
Tech Support for customers within the United States:
D-Link Technical Support over the Telephone:
[phone]
24 hours a day, seven days a week.
D-Link Technical Support over the Internet:
http://support.dlink.com
email:[email protected]
Tech Support for customers within Canada:
D-Link Technical Support over the Telephone:
[phone]
Monday to Friday 8:30am to 9:00pm EST
D-Link Technical Support over the Internet:
http://support.dlink.ca
email:[email protected]