D-Link DWA-110 User manual

Manual
Building Networks for People
802.11g (2.4GHz)
Wireless USB 2.0 Adapter
DWA-110
D-Link Wireless G

01
After you have completed the installation of the DWA-110 into your
Macintosh computer (please refer to the Quick Installation Guide included
with the product), follow the steps below to access the configuration settings.
From the Apple pull-down menu select System Preferences.
How to configure DWA-110 in
Macintosh OS
Double-click on the DWA-110 icon.
D-Link DWA-110 MAC OSX drivers supports OS 10.3.x & 10.4.x

2
Using the Configuration Utility with Macintosh OS
(continued)
This window will ap-
pear displaying the
Network Name,
BSSID; Link State;
Network Type ;
Channel and
Signal Strengh.
SSID;BSSID;Signal ;
Channel;
Authentication;
Encryption
Advanced：Wireless Mode;11 B/G Protection ; TX Rate
Info: Configuration Utility Version; MAC Address; Driver Version;
EEPROM Version
following:
Current Wireless
Network settings:
Available Wireless
Networks including:
Start Scan:
Click Start Scan to
rescan for an avail-
able wireless net-
work at your current
location.
Connect: Highlight a network profile and click Connect to connect
to that net-work profile.
Wireless Adaptor Settings:
Click Open Profile Drawer to manage your network profiles.

3
Using the Configuration Utility with Macintosh OS
(continued)
My Networks
ADD: Click ADD to creat a new network profile manually.
EDIT: Highlight a network profile and click EDIT to configure that network
profile .
DELETE: Highlight a network profile and click DELETE to remove that network
from the profile list.
ACTIVATE: Highlight a network profile and click ACTIVATE to connect to
that network profile.

4
Using the Configuration Utility with Macintosh OS
(continued)
Connect Order >
ADD or EDIT
Select the Authentication Type. In the
example, WPA-PSK was chosen.
Select the Encryption Type. In the
example, TKIP was chosen.
Enter WPA Pre-Shared Key. In this
case 8 digits of 1 have been entered.