D-Link DI-804V User manual

Before you begin…
Make sure that any existing Firewall Software/Devices are disabled and/or shutdown
before beginning installation of your new D-Link DI-804V Broadband Router.
• DI-804V Broadband Router
• Manual on CD
• Quick Install Guide
• Power Adapter – 5V DC, 2A*
• CAT5 UTP Cable
*Using a power supply with a different voltage rating will damage and void the warranty for this product. If any of the
above items are missing, please contact your reseller.
When you have completed the steps in this installation guide, your connected
network may look similar to this:
Connecting the DI-804V Broadband
Router to your network
Contents of Package

Connect
to Power
Adapter
-2-
• First, plug in the power supply. The Power LED will turn ON to indicate
proper operation.
• Using CAT5 UTP cables*, connect computers that are equipped with
Ethernet adapters to one of the four Ethernet LAN ports on the DI-
804V.
*All ports on the DI-804V are Auto-MDIX, meaning it will work with
either a straight through or cross-over cable.
The LED for the specific Local Ethernet Port will light up to indicate
proper connection. Check the front panel of the DI-804V to make sure
that the appropriate LEDs come on when you plug any cable in.
• Next, using a CAT5 UTP cable*, connect the Broadband (WAN) port to the
Cable or DSL modem.
The Broadband LED will light up to indicate proper connection.
Connecting the DI-804V Broadband
Router to your network
WAN Port: Connect to
Broadband Cable/DSL
Modem
LAN Ports: Connect to
Computers

Checking the IP Address of the computer being used to
configure the DI-804V Broadband Router
Note: If you are manually assigning a static IP, please refer to Appendix A.
-3-
Installing the DI-804V
using the Setup Wizard
Go to Start>Run
Type “cmd”
Type “ipconfig” at
the prompt in this
window.
The current IP
settings will be
displayed.
The IP address of the
computer must be
between 192.168.0.2
and 192.168.0.254 in
order to configure
the router.
If your IP address is within this range, then continue
to the next page.
If the IP address is not within the range, type
“ipconfig /release”, then type “ipconfig /renew”.
Your network adapter will now receive an IP address
within the desired range.

-4-
Click on Start the
Setup Wizard at the
bottom of the Main
menu.
Installing the DI-804V
using the Setup Wizard (continued)
Open the web browser and
type “http://192.168.0.1”
into the URL address box.
Note: Please disable any
p
roxy server setting for the
web browser.
When the login screen
appears, type “admin”
in the User name box,
and leave the Password
field blank.
Click OK.

-5-
At this window, select
your local time zone.
Click Next, to
continue.
The default IP address of the
LAN port is set to 192.168.0.1
Subnet mask is
255.255.255.0
Click Next to accept the
default settings.
Installing the DI-804V
using the Setup Wizard (continued)
By default, the DI-804V is
set to obtain an IP address
automatically. If you are
assigned a static IP address
by your ISP provider,
remove the check mark in
the window at the right and
enter the static IP
information provided to you
by your ISP.
Click Next.

-6-
Installing the DI-804V
using the Setup Wizard(continued)
Cable modem users:
If your ISP requires you to enter a host
name, then place a checkmark in the
second box and enter the appropriate
information.
If you are using a backup dial-up
modem with the Broadband router,
place a checkmark in the box, as
shown, and enter the settings for the
dial-up connection.
Click Next
A specific MAC address is required:
If your ISP requires you to use a
specific WAN Ethernet MAC address,
place a checkmark on the third box
and enter the appropriate information.
Click Next
DSL users:
If you are using a PPPoE client to
connect to your DSL provider, place
a checkmark on the first box, and
enter the User Name and Password
in the appropriate box.
We will skip this section for now.
Please refer to Appendix C for a
VPN setup example.
Click Next

-7-
To complete the Setup Wizard,
Click Save and Restart
To check the connection,
open the web browser
and go to your favorite website.
If you are unable to browse, please do
the following:
1. Refer to Appendix B to check your
connection to the wireless router.
2. Use “Help” on the
Main Menu.
3. Refer to the “Troubleshooting”
section in the user’s manual.
Installing the DI-804V
using the Setup Wizard (continued)
Checking the connection
to the Internet

Assigning a Static IP
Address
If the network adapter is unable to
obtain an IP address automatically
from the Broadband Router, then go
to: START>SETTINGS>
CONTROL PANEL>
NETWORK CONNECTIONS
Then right-click on the “Local Area
Connection” icon corresponding to
your network adapter, click on
Properties.
Highlight “Internet Protocol
(TCP/IP)”
Click on “Properties.”
Choose “Use the following IP
address” and input an IP address
between 192.168.0.2 to
192.168.0.99 in the IP Address box.
Enter the “Subnet mask” of
255.255.255.0
Enter the “Default Gateway” of
192.168.0.1
Enter the “Preferred DNS server”
of 192.168.0.1
Click OK on all screens to save
the changes.
A
pp
endix A
-8-

Checking Your Network Connections
Use “Ping” to check your network connections.
Go to START>RUN
Type “cmd” in the box.
Click “OK”
If cmd does not work, try command
Type “ping 192.168.0.1” which is the IP address
of the LAN port of the Broadband Router. Hit
the “Enter” key.
A successful connection will show four replies,
as shown.
What is a Virtual Private Network (VPN)?
A VPN is the extension of a private network across public or shared networks such as the
Internet. A VPN allows data to be sent between two computers across the Internet in a manner
that emulates a point-to-point private link.
Sample VPN Tunnel Setup
This example will demonstrate how to create a Virtual private Network (VPN) between two
remote locations through the Internet. The VPN policy will use 3DES IPSec to securely
send/receive encrypted data over the Internet. When the VPN tunnel is enabled, the two offices
will virtually appear to be on the same local network.
This example will consist of two DI-804V VPN Routers with a simple setup. The two remote
offices in this example will be known as Office A and Office B. Both VPN Routers must
already be set up and able to access each other. This is only an example, your setup will vary
using the WAN IP address provided by your ISP.
Please note the differences in the IP addresses for each office.
-9-
A
pp
endix B
A
pp
endix C

We will begin by configuring the DI-804V at Office A. Start by going into VPN Settings
under the Basic Setup menu. In the Connection Name field, type in OfficeA.
Click ADD.
A properties screen will
appear for the new
connection you have
made. Fill in the
appropriate information
for Office A.
Connection Name: OfficeA
Local IPSEC Identifier: Local
Remote IPSEC Identifier: Remote
Remote IP Network: 192.168.1.0
Remote IP Netmask: 255.255.255.0
Remote Gateway IP: 192.170.0.2
Network Interface: WAN
ETHERNET
Secure Association: IKE
Perfect Forward Secure: Enabled
PreShared Key: 123456
Key Life: 28800
IKE Life Time: 3600
Click SAVE
There should now be a VPN policy created for Office A. Now you will want to Save & Restart
the DI-804V.
Note: 123456 is an example of a preshared key, please fill in any secret preshared key you
desire. Keep in mind that both sites require the same preshared key.
-10-

Office A setup is now complete, we will now configure Office B with the other DI-804V,
Follow the same steps previously with Ofice A to create a VPN policy. Please change the
appropriate information.
Connection Name: OfficeB
Local IPSEC Identifier: Local
Remote IPSEC Identifier: Remote
Remote IP Network: 192.168.0.0
Remote IP Netmask: 255.255.255.0
Remote Gateway IP: 192.170.0.1
Network Interface: WAN
ETHERNET
Secure Association: IKE
Perfect Forward Secure: Enabled
PreShared Key: 123456
Key Life: 28800
IKE Life Time: 3600
Click SAVE
There should now be a VPN policy created for Office B. Now you will want to Save & Restart
the DI-804V.
After the VPN policies have been
created for the two Offices, the two
remote locations should authenticate
and connect. To view the status of the
VPN connection, go to the Device
Status menu. On the bottom-left hand
side of the menu, click on the VPN
Status icon.
-11-

A VPN Status pop-up screen will appear showing VPN connection status. If a VPN tunnel is
active, the State should indicate Q-Estab.
Building Networks for People
You can find the most recent software and user documentation on the
D-Link website.
D-Link provides free technical support for customers within the United States fo
r
the duration of the warranty period on this product.
U.S. customers can contact D-Link technical support through our web site or by
phone.
D-Link Technical Support over the Telephone:
[phone]
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
Technical Su
pp
ort