D-Link DIR-505 User manual

Quick Installation Guide
DIR-505
Mobile Companion
Version 1.20 | January 3, 2013
Installationsanleitung
Guide D’installation
Guía de Instalación
Guida di Installazione
Installatiehandleiding
Instrukcja Instalacji
Instalační Příručka
Telepítési Segédlet
Installasjonsveiledning
Installationsvejledning
Asennusopas
Installationsguide
Guia de Instalação
Οδηγος Γρηγορης Εγκαταστασης
Vodič za Brzu Instalaciju
Kratka Navodila za Uporabo
Ghid de Instalare Rapidă

DIR-505
2
ENGLISH
Important Information
Users who subscribe to limited or “pay as you use” broadband
internet access.
In the WAN conguration settings, there is a parameter called Maximum idle
timer. This parameter controls how many seconds of inactivity before dropping
connection to the internet. The default setting is “0” which disables this
functionality and the internet will be connected all the time. We suggest that you
should change the Maximum idle timer to “300” (5 minutes) so that the device will
drop the line after 5 minutes of inactivity and keep usage costs down.
Users who subscribe to unlimited broadband internet access.
You can just leave this parameter unchanged or enable Auto-reconnect to be
always on line.
Technical notes:
The Maximum idle timer is only relevant if your ISP is using a PPPoE connection.
Important information regarding your
Internet subscription EN
!

1
DIR-505
ENGLISH
Package Contents
Mobile Companion (DIR-505)
If any of these items are missing from your packaging, contact your
reseller.
Using the Plug Adapters
Your DIR-505 includes plug adapters that allow you to use it in your
region’s power outlets. The DIR-505 is compatible with both 110/120 V
and 220/240 V power outlets.
• Flip the folding plug up, then slide the plug
adapter you want to use over it. To remove
the plug adapter, simply pull it up and o
the plug.
Plug Adapters (UK and EU plugs)
Wi-Fi Conguration Card

DIR-505
2
ENGLISH
Select Your Mode
Your DIR-505 has several modes, which you can select by using the
switch on the top of the device:
• Charger: This lets you use the USB port to charge high-power
devices like iPads.
• Router/AP(Access Point): This lets you share an Internet
connection from a DSL or cable modem, or from another wired
connection. This can be used at home, at work, or in a hotel. You
can also share les on an attached USB storage drive through
SharePort Mobile.
• Repeater: This will extend the range of an existing wireless
network.
• Wi-Fi Hotspot: This lets you share an Internet connection from
another wireless network, like a café or airport hotspot. You
can also share les on an attached USB storage drive through
SharePort Mobile.
Charger
Repeater
Wi-Fi
Hotspot
Router/AP

3
DIR-505
ENGLISH
Connection Setup with QRS Mobile
The free QRS Mobile app is the easiest way to get your DIR-505
congured and ready to use. It guides you step by step through setup
of your device so you can be up and running in no time!
• Search for QRS Mobile in the App Store or Google Play, or use a
QR code scanner to scan the corresponding code and download
the app.
• Move the switch on the top of the DIR-505 to the mode you want
to use and plug it into a power outlet.
• Connect your mobile device to your DIR-505 wirelessly by using
the default Wi-Fi network name and password printed on the
included Wi-Fi Conguration Card.
• You can now open the QRS Mobile app and follow the on-screen
instructions to congure your DIR-505.
• After, setting up your DIR-505, you may need to set your PC and
mobile devices to connect to the wireless network name you have
just created.

DIR-505
4
ENGLISH
Router/Access Point Mode
• Connect your DSL/cable modem or wired
Internet line to the DIR-505 with your existing
Ethernet cable, then plug the DIR-505 into a
power outlet.
• Move the switch on the top of the DIR-505 to
Router/AP Mode.
Outlet Ethernet
Charger
Repeater
Wi-Fi
Hotspot
Router/AP
Router/Access Point Mode lets you share an Internet connection from a
broadband modem or other wired connection.
• Connect your PC or mobile device to your
DIR-505 wirelessly by using the default Wi-Fi
network name and password printed on the
included Wi-Fi Conguration Card.
• Open a web browser, and the setup wizard
should appear. If it does not appear, enter
http://dlinkrouter.local. into the address
bar and log in. The default username is
admin, and the default password is blank.
Click the Internet Connection Setup
Wizard button.

5
DIR-505
ENGLISH
• The DIR-505 will automatically detect your
Internet connection type.
• Select Router from the dropdown menu to
share your Internet connection.
• Enter a network name (SSID) and a password
to secure access to your network, then click
Next.
• Enter a password to secure access to your
DIR-505 router, then click Next.
• Select your time zone then click Next.
• After nishing the setup wizard, the DIR-505
is ready to use.

DIR-505
6
ENGLISH
Repeater Mode
• Move the switch on the top of the DIR-505 to
Repeater Mode
Charger
Repeater
Wi-Fi
Hotspot
Router/AP
If your router has a WPS button, you can use WPS to set up Repeater
Mode quickly and easily:
Repeater Mode lets you extend the range of an existing wireless
network.
• You can now connect your PC or mobile
device to your extended network by
using the default Wi-Fi network name and
password printed on the included Wi-Fi
Conguration Card.
• Press and hold the WPS button on the
DIR-505 for at least 5 seconds, then press the
WPS button on your router within 2 minutes.
The DIR-505 will automatically create a
connection to your router. A connection has
been successfully created when the green
LED stops ashing.

7
DIR-505
ENGLISH
• Select Manual and click Next. Select the
Wi-Fi Network you want to extend, then click
Connect, and enter the Wi-Fi Password for
the selected network if needed.
• Enter the Wi-Fi Network name and password
you want to use for your extended network.
• After nishing the setup wizard, your devices
can connect to the new wireless network.
• Open a web browser, and the setup wizard
should appear. If it does not appear, enter
http://dlinkrouter.local. into the address
bar and log in. By default, the username is
Admin, and the password should be left
blank. Click the Launch Setup Wizard
button.
If your router does not have a WPS button, you can use a web
browser to set up your DIR-505:
• Connect your PC or mobile device to your
DIR-505 wirelessly by using the default Wi-Fi
network name and password printed on the
included Wi-Fi Conguration Card.

DIR-505
8
ENGLISH
Wi-Fi Hotspot Mode
• Move the switch on the top of the DIR-505 to
Wi-Fi Hotspot Mode
Wi-Fi Hotspot Mode lets you share a connection to another wireless
hotspot, like at a café or airport.
Charger
Repeater
Wi-Fi
Hotspot
Router/AP
• Open a web browser, and the setup wizard
should appear. If it does not appear, enter
http://dlinkrouter.local. into the address
bar and log in. The default username is
admin, and the default password is blank.
Click the Launch Wireless Setup Wizard
button.
• Connect your PC or mobile device to your
DIR-505 wirelessly by using the default Wi-Fi
network name and password printed on the
included Wi-Fi Conguration Card.