D-Link DSL-2740U User manual

Quick Installation Guide
DSL-2740U
Wireless N ADSL2+ Modem Router

DSL-2740U Quick Installation Guide
BEFORE YOU BEGI
Delivery Package
•Router DSL-2740U
•Power adapter DC 12V/0.5A
•RJ-11 telepho e cable
•Ether et cable (CAT 5E)
•Splitter
•“Quick Installation Guide” (brochure).
If a y of the items are missi g, please co tact your reseller.
The “User Manual” a d “Quick Installation Guide” docume ts i Russia
a d E glish are available o D-Li k website (see ftp.dli k.ru/pub/ADSL/DSL-
2740U_B1A_T1A/Descriptio /).
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address of router 192.168.1.1
Username (login) admin
Password admin
ame of wireless network (SSID) DSL-2740U
2

DSL-2740U Quick Installation Guide
System Requirements and Equipment
•A computer with a y operati g system that supports a web browser.
•A web browser to access the web-based i terface of the router:
◦Apple Safari 5 a d later
◦Google Chrome 5 a d later
◦Microsoft I ter et Explorer 7 a d later
◦Mozilla Firefox 5 a d later
◦Opera 10 a d later.
•A NIC (Ether et or Wi-Fi adapter) to co ect to the router.
•A 802.11b, g, or Wi-Fi adapter to create a wireless etwork.
3

DSL-2740U Quick Installation Guide
CO ECTI G TO PC
PC with Ethernet Adapter
1. Make sure that your PC is powered off.
2. Co ect a Ether et cable betwee a y of four Ether et ports located o
the back pa el of the router a d the Ether et port of your PC.
3. To connect the router to a DSL line: co ect a pho e cable betwee the
DSL port of the router a d the ADSL OUT port of the splitter. Co ect
your pho e to the PHO E port of the splitter. The co ect a other
pho e cable betwee a pho e jack a d the ADSL I port of the splitter.
4. To connect the router to an Ethernet line: co ect the Ether et cable
betwee a y of four Ether et ports located o the back pa el of the router
a d the Ether et li e.
5. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
6. Tur o the router by pressi g the O /OFF butto o its back pa el.
7. Tur o your PC a d wait u til your operati g system is completely
loaded.
Now you should co figure your PC to obtai a IP address automatically (as
DHCP clie t).
4

DSL-2740U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > etwork
and Internet Connections > etwork Connections wi dow.
2. I the etwork Connections wi dow, right-click the releva t Local
Area Connection ico a d select the Properties li e i the me u
displayed.
3. I the Local Area Connection Properties wi dow, o the General
tab, select the Internet Protocol (TCP/IP) li e. Click the Properties
butto .
5

DSL-2740U Quick Installation Guide
4. Select the Obtain an IP address automatically a d Obtain D S
server address automatically radio butto s. Click the OK butto .
5. Click the ОК butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
6

DSL-2740U Quick Installation Guide
Obtaining P Address Automatically
in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the etwork and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the etwork and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, right-click the releva t Local Area Connection
ico a d select the Properties li e i the me u displayed.
5. I the Local Area Connection Properties wi dow, o the
etworking tab, select the Internet Protocol Version 4 (TCP/IPv4)
li e. Click the Properties butto .
7

DSL-2740U Quick Installation Guide
6. Select the Obtain an IP address automatically a d Obtain D S
server address automatically radio butto s. Click the OK butto .
7. Click the OK butto i the co ectio properties wi dow.
Now your computer is co figured to obtai a IP address automatically.
8

DSL-2740U Quick Installation Guide
PC with Wi-Fi Adapter
1. To connect the router to a DSL line: co ect a pho e cable betwee the
DSL port of the router a d the ADSL OUT port of the splitter. Co ect
your pho e to the PHO E port of the splitter. The co ect a other
pho e cable betwee a pho e jack a d the ADSL I port of the splitter.
2. To connect the router to an Ethernet line: co ect the Ether et cable
betwee a y of four Ether et ports located o the back pa el of the router
a d the Ether et li e.
3. Co ect the power cord to the power co ector port o the back pa el of
the router, the plug the power adapter i to a electrical outlet or power
strip.
4. Tur o the router by pressi g the O /OFF butto o its back pa el.
5. Tur o your PC a d wait u til your operati g system is completely
loaded.
6. Tur o your Wi-Fi adapter. As a rule, moder otebooks with built-i
wireless NICs are equipped with a butto or switch that tur s o /off the
wireless adapter (refer to your PC docume ts). If your PC is equipped
with a pluggable wireless NIC, i stall the software provided with your
Wi-Fi adapter.
Now you should co figure your Wi-Fi adapter.
9

DSL-2740U Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start butto a d proceed to the Control Panel > etwork
and Internet Connections > etwork Connections wi dow.
2. Select the ico of the wireless etwork co ectio a d make sure that
your Wi-Fi adapter is o .
3. Search for available wireless etworks.
4. I the ope ed Wireless etwork Connection wi dow, select the
wireless etwork DSL-2740U a d click the Connect butto .
After that the Wireless etwork Connection Status wi dow appears.
!
If you perform i itial co figuratio of the router via Wi-Fi co ectio ,
ote that immediately after cha gi g the wireless default setti gs of the
router you will eed to reco figure the wireless co ectio usi g the
ewly specified setti gs.
10

DSL-2740U Quick Installation Guide
Configuring Wi-Fi Adapter in OS Windows 7
1. Click the Start butto a d proceed to the Control Panel wi dow.
2. Select the etwork and Sharing Center sectio . (If the Co trol Pa el
has the category view (the Category value is selected from the View by
drop-dow list i the top right cor er of the wi dow), choose the View
network status and tasks li e u der the etwork and Internet
sectio .)
3. I the me u located o the left part of the wi dow, select the Change
adapter settings li e.
4. I the ope ed wi dow, select the ico of the wireless etwork co ectio
a d make sure that your Wi-Fi adapter is o .
5. To ope the list of available wireless etworks, select the ico of the
wireless etwork co ectio a d click the Connect To butto or left-
click the etwork ico i the otificatio area located o the right side of
the taskbar.
11

DSL-2740U Quick Installation Guide
6. I the ope ed wi dow, i the list of available wireless etworks, select the
wireless etwork DSL-2740U a d click the Connect butto .
7. Wait for about 20-30 seco ds. After the co ectio is established, the
etwork ico will be displayed as the sig al level scale.
!
If you perform i itial co figuratio of the router via Wi-Fi co ectio ,
ote that immediately after cha gi g the wireless default setti gs of the
router you will eed to reco figure the wireless co ectio usi g the
ewly specified setti gs.
12

DSL-2740U Quick Installation Guide
CO FIGURI G ROUTER
Connecting to Web-based nterface
1. Start a web browser.
2. I the address bar of the web browser, e ter the IP address of the router
(by default, the followi g IP address is specified: 192.168.1.1). Press
the Enter key.
3. O the ope ed page, e ter the user ame a d password for the
admi istrator accou t i the Login a d Password fields
correspo di gly (by default, the followi g user ame a d password are
specified: admin, admin). The click the Enter li k.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upo co ecti g to
the web-based i terface of the router, make sure that you have properly
co ected the router to your computer.
!
For security reaso s, it is stro gly recomme ded to cha ge the
admi istrator password upo i itial co figuratio of the router. To do
this, click the Advanced settings li k a d proceed to the System /
Administrator password page.
13

DSL-2740U Quick Installation Guide
After successful registratio the router's quick setti gs page ope s.
The web-based i terface of the router is multili gual. Select a eeded la guage
from the me u displayed whe the mouse poi ter is over the Language
captio . You ca cha ge the la guage of the web-based i terface i a y me u
item.
After selecti g the la guage, the otificatio o u saved cha ges will be
displayed. Click the Save ico ( ) to save the curre t la guage of the
web-based i terface as the default la guage.
14

DSL-2740U Quick Installation Guide
The quick setti gs page displays ge eral i formatio o the router a d its
software, a d data o the DSL co ectio state.
O the quick setti gs page, you ca quickly get to some pages of the web-
based i terface or ru a eeded Wizard (use the li ks o the left side of the
page).
From the quick setti gs page you ca switch to the adva ced setti gs sectio .
To do this, click the Advanced settings li k i the bottom right cor er of
the page.
Also you ca fi d a specific page via search. To do this, e ter the ame of the
page, wholly or partly, i the search bar i the top part of the web-based
i terface page, a d the select a eeded li k i the search results.
15

DSL-2740U Quick Installation Guide
Configuring Connection to the nternet
!
You should co figure your WAN co ectio i accorda ce with data
provided by your I ter et service provider (ISP). Make sure that you
have obtai ed all ecessary i formatio prior to co figuri g your WAN
co ectio . Otherwise co tact your ISP.
ADSL WAN Connection
1. Go to the et / WA page a d click the Add butto .
2. I the General settings sectio , from the Provider drop-dow list,
leave the Manually value.
3. From the Connection Type drop-dow list, select the eeded value.
4. From the Interface drop-dow list, select the DSL(new) value.
5. Specify a ame for your co ectio (a y ame for easier ide tificatio ) i
the ame field.
6. I the ATM sectio , specify the VPI a d VCI i the releva t fields, a d
the select a method of e capsulatio from the Encapsulation Mode
drop-dow list.
16

DSL-2740U Quick Installation Guide
7. For the PPPoE a d PPPoA co ectio types, e ter authorizatio data
provided by your ISP i the PPP sectio (the user ame (logi ) i the
Username field a d the password i the Password a d Password
confirmation fields). If these data have ot bee provided by your ISP,
select the Without authorization checkbox.
8. For the IPoA a d Static IP co ectio types, fill i the IP Address,
etmask, a d Gateway IP address fields i the IP sectio .
9. Deselect the AT checkbox i the Miscellaneous sectio if your ISP
requires you to disable the etwork address tra slatio fu ctio .
10. Click the Save butto .
17

DSL-2740U Quick Installation Guide
Ethernet WAN Connection
1. Go to the Advanced / Interface grouping page.
2. Place the mouse poi ter o the router's LAN port that will be used as the
WAN port a d click the Make WA li e i the me u displayed. Click
the Save li k.
3. Go to the et / WA page a d click the Add butto .
4. I the General settings sectio , from the Provider drop-dow list,
leave the Manually value.
5. From the Connection Type drop-dow list, select the eeded value.
6. From the Interface drop-dow list, select the value correspo di g to the
LAN port that will be used as the WAN port.
7. Specify a ame for your co ectio (a y ame for easier ide tificatio ) i
the ame field.
18

DSL-2740U Quick Installation Guide
8. If your ISP uses MAC address bi di g, i the Ethernet sectio , i the
MAC field, e ter the MAC address registered by your ISP upo
co cludi g the agreeme t. To set the MAC address of the etwork
i terface card (of the computer that is bei g used to co figure the router
at the mome t) as the MAC address of the WAN i terface, click the
Clone MAC Address butto ( ). To set the address of a device
co ected to the router's LAN at the mome t, select the releva t value
from the drop-dow list (the field will be filled i automatically).
9. For the PPPoE co ectio type, e ter authorizatio data provided by
your ISP i the PPP sectio (the user ame (logi ) i the Username
field a d the password i the Password a d Password confirmation
fields). If these data have ot bee provided by your ISP, select the
Without authorization checkbox.
10. For the Static IP co ectio type, fill i the IP Address, etmask,
a d Gateway IP address fields i the IP sectio .
19

DSL-2740U Quick Installation Guide
11. Deselect the AT checkbox i the Miscellaneous sectio if your ISP
requires you to disable the etwork address tra slatio fu ctio .
12. Click the Save butto .
20