D-Link DCS-6004L? DCS-6005L User manual

DCS-6004L/DCS-6005L
Quick Install Guide
HD Mini Dome Network Camera
Cloud Camera

If any of the above items are missing, please contact your reseller.
DCS-6004L HD PoE Mini Dome Network Camera or
DCS-6005L HD Wireless Mini Dome Network Camera
Power Adapter
Ethernet Extension (RJ-45 Coupler)
Quick Install Guide
Package Contents
Mounting Plate
Audio Out Cable
Collar*
Ethernet Cable
*Note: The DCS-6004L comes with the black collar attached. The DCS-6005L
comes with the white collar attached.
2
ENGLISH

Minimum Requirements
Computer with:
Web Browser
• PC with 1.3GHz processor or above and at least 128MB RAM
• Windows® 8, 7, Vista® or XP SP3
• Mac OS® X, 10.6 or higher
• Existing 10/100 Ethernet-based network (DCS-6004L/6005L) or
802.11g/n wireless network (DCS-6005L)
• Internet Explorer® 7, Firefox®, Safari® 6, or Chrome™
• A router (D-Link Cloud Router is recommended)
• A broadband Internet connection
• An e-mail account (required to create a mydlink account)
Network Device and Service
mydlink Requirements
• For mydlink and mydlink app requirements refer to:
http://www.mydlink.com
Hardware Overview
1 Status LED Indicates the camera’s current status
2 WPS Button Push to initialize WPS on the camera (only on DCS-6005L)
3 WPS LED Indicates the current status of WPS (only on DCS-6005L)
4 Reset Button Press and hold the reset button for six seconds to reset
5 microSD Card Slot Used to add storage for recording
6 IR LED Used to illuminate the camera’s eld of view at night
7 Camera Sensor HD-capable CMOS sensor
3
4
1
5
2
6
7
3
ENGLISH

What is mydlink™?
With a mydlink-enabled camera, you
can stay connected to everything
you love from anywhere, anytime.
The mydlink service can be accessed
by a web browser and also provides
an optional downloadable mydlink
app that allows you to have a better
experience on your mobile devices.
With the mydlink app, you can
quickly and easily view your camera
feed from anywhere using a Wi-Fi,
3G, or 4G connection.
Cloud Router
mydlink cloud service
DCS-6005L*
iPod
Smartphone
Tablet
Laptop
Laptop
Desktop
mydlink app
Modem
1
mydlink Lite App (Free)
Search for “mydlink lite” to download and install the app on your smartphone
or tablet when connected to the Internet. You can also nd the app by
scanning the QR code below with a QR code reader.
mydlink+ App (Paid - Tablet Only)
Search for the word “mydlink+” to download and install the app on your
tablet when connected to the Internet. You can also nd the app by scanning
the QR code below with a QR code reader.
*Note: DCS-6005L is shown above. DCS-6004L
requires an Ethernet cable.
System Requirements: Refer to http://www.mydlink.com
System Requirements: Refer to http://www.mydlink.com
4
ENGLISH

If you have a D-Link Cloud Router, you can take advantage of Zero Conguration
Setup. This feature automatically congures your camera’s settings for you and
adds it to your mydlink account. If you do not have a D-Link Cloud router, you can
use the Setup Wizard to install and congure your camera. (Refer to instructions
on the next page.)
Zero Conguration Setup
1
2
If you have the DCS-6004L and you will be using Power
over Ethernet, you can skip this step. Otherwise, attach
the external power supply to the power input connector
located on the inside of the camera, and connect it to a
wall outlet or power strip.
Connect the included Ethernet cable to the network cable
connector located on the camera, and attach it to the
network.
3
4
Remove the camera housing by squeezing housing
release buttons on both sides of the camera.
Reattach the camera housing by lining up the access
port on the housing with the access port on the camera
base. Firmly push down until the camera housing snaps
back onto the camera base.
5
ENGLISH

Setup Wizard
Please download the Setup Wizard from http://www.mydlink.com/support.
If you do not have a D-Link Cloud Router, use any Windows or Mac computer
to run the Setup Wizard, which will help you install and congure your camera.
When the Setup Wizard appears, it will guide you step-by-step through the
installation process from connecting your hardware to conguring your camera
and registering it with your mydlink account.
Windows Users - Extract (“unzip”) the les to a folder on your computer and
then double-click the autorun.exe le.
Mac Users - Download the Mac OS Setup Wizard. Open the SetupWizard le
and launch the application.
If you have the DCS-6005L and you wish to
connect your camera to your router wirelessly,
you can simply disconnect the Ethernet cable
and move the camera to its intended location
after you have added the camera to your
mydlink account.
From any computer, open a web browser, go
to http://www.mydlink.com and log into
your account.
Click on the device name when the notice
appears to add the camera to your account.
5
DCS-6004L
6
ENGLISH

Start mydlink
Open a web browser on any computer connected to the Internet.
Enter http://www.mydlink.com in the address bar and press Enter.
Sign in with your mydlink account registered in the Setup Wizard.
1
2
3
Browser Requirements:
Java
Active X
• Windows does not have Java installed by default. Please download it from http://www.java.com.
• In Mac OS X 10.7.x, Java applets are disabled by default. Click the Finder > Applications > Utilities >
Java Preferences and check the Enable applet plug-in and Web Start applications option.
• The ActiveX® controls in IE will install automatically if needed. We suggest that you make sure that
you have enabled the related options in Tools > Internet Options > Security > Custom Level.
Follow the instructions below to access your mydlink account:
7
ENGLISH

Mount the Camera
Refer to the steps below to assist you with mounting the camera.
We suggest that you congure the camera before mounting. If you plan on
passing the cables for the camera through the wall or ceiling, make sure you
determine the position and angle of the camera you want before drilling a hole
for the cables in Step 6.
1. The camera must be separated from the
mounting base to expose the holes in the
mounting base. Remove the camera head
from the mounting base by rmly holding
the camera with the D-Link logo facing
you and then sliding the mounting base
towards you.
1
2. Place the mounting base alignment sticker
where you want to position the camera.
Depending on the material of the wall or
ceiling, use proper tools to drill two holes
where you placed the alignment sticker. If
the wall is made out of concrete, drill the
holes rst, then insert the plastic anchors
to support the screws.
2
4
4. With the D-Link logo facing you, reattach
the camera to the mounting plate by
sliding the camera towards you until it
locks into position, and replace the cover.
3. Align the mounting base holes with the
holes in the wall when you position the
mounting base. Use the supplied screws to
attach the mounting base to the surface of
the wall or ceiling.
3
8
ENGLISH

5. Adjust the angle of the camera as desired
by rotating it. 5
Note: If you are going to pass the cables for the camera through the wall or
ceiling, remove the cover and proceed to step 6.
6. Optional Step - With the camera in the
desired position, use a pencil to mark
the hole for the cables. Before drilling,
make sure the hole for the cables will
be hidden by the camera. Drill the hole
and pass the cables through.
Note: After you pass the cables for the camera through the wall or ceiling,
lock the camera into position as described in step 4 and replace the cover.
6
9
ENGLISH

Adjusting the Viewing Angle
Refer to the steps below for adjusting the viewing angle of the camera.
1. The camera housing needs to be separated
from the camera base to expose the screw
used to adjust the viewing angle. Remove
the camera housing from the camera base
by squeezing the housing release buttons
on either side of the camera.
2. Lift the camera housing up o the camera
base once the housing has been released.
3. Use a Phillips screwdriver to loosen
the retaining screw used to secure the
viewing angle of the camera lens.
4. Manually adjust the viewing angle back
and forth to your desired location.
5. Use a Phillips screwdriver to tighten
the retaining screw used to secure the
viewing angle of the camera lens.
6. Reattach the camera housing by lining up
the access port on the housing with the
access port on the camera base. Firmly push
down until the camera housing snaps back
onto the camera base.
1
2
3
4
5
6
10
ENGLISH

Troubleshooting
1. HOW DO I CONNECT MY CAMERA USING WPS? DCS6005L ONLY
We recommend that you use either the Zero Configuration or Setup
Wizard method described earlier in this guide as they will automatically
congure your camera for your wireless network.
If you wish to use WPS to connect your camera, follow these steps:
• Press and hold the WPS button on the back of the camera for five
seconds. The blue WPS status LED will blink.
• Press the WPS button on your wireless router or access point within 60
seconds. On some routers, you may need to log into the web interface
and then click an onscreen button to activate the WPS feature. If you
are not sure where the WPS button is on your router or access point,
please refer to your router's user manual.
2. WHAT SHOULD I DO IF I FORGET MY PASSWORD?
You must reset your camera. Unfortunately, this
will change your settings back to the factory
default settings. To reset your camera, use an
unfolded paperclip to press and hold the RESET
button for a minimum of six seconds while your
camera is plugged in.
3. HOW DO I CONNECT A SPEAKER TO MY CAMERA?
To connect a speaker to the camera, rst remove the camera cover. Then
plug the included Audio Out Cable into the white connector on the face
of the camera labelled "LINE OUT".
3. HOW DO I FIT THE COVER OVER MY CAMERA WHEN THE CABLES ARE
CONNECTED?
If you do not choose to pass the cables for the camera through the wall or
ceiling, in order to t the cover over the camera when cables are connected,
you must remove the perforated tabs from the camera cover. Just locate
the tabs along the rim of the cover and press until they break loose.
11
ENGLISH

Technical Support
This guide is only for the rst time conguration. Please refer to the user manual to
learn more or visit http://www.mydlink.com for more information. Also feel free
to contact us. U.S. and Canadian customers can contact D-Link Technical Support
through our website.
http://support.dlink.com
USA
http://support.dlink.ca
Canada
Version 1.0_90x130
March 28, 2014
all633L1UD03
©2014 All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries.
Other trademarks are the property of their respective owners. Maximum wireless signal rate derived from IEEE Standard
802.11g and 802.11n specications. Actual data throughput will vary. Network conditions and environmental factors,
including volume of network trac, building materials and construction, and network overhead, lower actual data
throughput rate. Environmental factors will adversely aect wireless signal range. Product specications, size and shape
are subject to change without notice, and actual product appearance may dier from that depicted on the packaging.
Visit dlink.com (US) or dlink.ca (Canada) for more details.