D-Link DCS-6004L? DCS-6005L User manual

User Manual
HD PoE Mini Dome Network Camera
Version 1.00 | 11/26/2013
DCS-6004L

2D-Link DCS-6004L User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or
organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and
change. Please refer to the www.mydlink.com website for the most current information.
Manual Revisions
Revision Date Description
1.0 October 25, 2013 DCS-6004L Revision A1 with rmware version 1.00
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks of D-Link Corporation or its subsidiaries in the United States or other
countries. All other company or product names mentioned herein are trademarks or registered trademarks of their respective companies.
Copyright © 2013 D-Link Corporation.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation.
Preface

3D-Link DCS-6004L User Manual
Table of Contents
Package Contents .................................................................4
Introduction ............................................................................5
System Requirements .........................................................5
Features ....................................................................................6
Hardware Overview .............................................................7
Front ......................................................................................7
Installation .....................................................................................8
Camera Installation Wizard ...............................................9
Windows Users ......................................................................9
Mac Users...............................................................................10
Hardware Installation ........................................................11
Mounting the Camera .......................................................12
Adjusting the Viewing Angle ..........................................13
mydlink ...........................................................................................14
Conguration ...............................................................................15
Using the Conguration Interface ................................15
Live Video ..............................................................................16
Setup .......................................................................................17
Setup Wizard ....................................................................17
Network Setup .................................................................23
Dynamic DNS ...................................................................28
Image Setup .....................................................................29
Audio and Video ..................................................................31
Preset .......................................................................................33
Motion Detection ...............................................................35
Time and Date ......................................................................37
Event Setup ...........................................................................38
SD Card ...................................................................................46
ICR ............................................................................................47
HTTPS ......................................................................................48
Access List ..............................................................................49
Maintenance .........................................................................50
Device Management .........................................................50
System ....................................................................................52
Firmware Upgrade ..............................................................53
Status ......................................................................................54
Device Info ...................................................................................54
Logs ................................................................................................55
Help. ................................................................................................56
Technical Specications ...........................................................57

4D-Link DCS-6004L User Manual
Section 1: Product Overview
Product Overview
Package Contents
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a dierent voltage than the one included with your product will cause damage and void the warranty for this
product.
DCS-6004L HD PoE Mini Dome Network Camera
CAT5 Ethernet Cable
Power Adapter
CD-ROM with User Manual and Software
Quick Installation Guide
Camera Accessories (Audio extension cable, female Ethernet connector, and mounting alignment guide)

5D-Link DCS-6004L User Manual
Section 1: Product Overview
Introduction
Congratulations on your purchase of the DCS-6004L HD PoE Mini Dome Network Camera. The DCS-6004L is a versatile
and unique solution for your small office or home. Unlike a standard webcam, the DCS-6004L is a complete system
with a built-in CPU and web server that transmits high quality video images for security and surveillance. The DCS-6004L can
be accessed remotely, and controlled from any PC/Notebook over your local network or through the Internet via a web
browser.
• Computer with Microsoft Windows® 8/7/Vista/XP, or Mac with OS X 10.6 or higher
• PC with 1.3GHz or above; at least 128MB RAM
• Internet Explorer 7, Firefox 12, Safari 4, or Chrome 20 or higher version with Java installed and enabled
• Existing 10/100 Ethernet-based network
• A MicroSD memory card (optional) is required for recording to onboard storage. SDHC Class 6 or above is recommended.
• Broadband Internet connection
System Requirements

6D-Link DCS-6004L User Manual
Section 1: Product Overview
Simple to Use
The DCS-6004L is a stand-alone system with a built-in CPU, requiring no special hardware or software. The DCS-6004L supports both ActiveX
mode for Internet Explorer and Java mode for other browsers such as Chrome®, Firefox®, and Safari®.
Supports a Variety of Platforms
Supporting TCP/IP networking, HTTP, and other Internet related protocols. The DCS-6004L can also be integrated easily into other network
applications because of its standards-based features.
Ethernet/Fast Ethernet Support
The DCS-6004L offers Power over Ethernet/Fast Ethernet connectivity, making the DCS-6004L easy to integrate into your existing network
environment. The DCS-6004L works with 10Mbps Ethernet networks or 100Mbps Fast Ethernet networks for traditional wired environments,
and access points for added flexibility. The Site Survey feature also allows you to view and connect to any available wireless networks.
Web Conguration
Using a standard Web browser, administrators can congure and manage the Network Camera directly from its own Web page via Intranet or
Internet. This means you can access your DCS-6004L anytime, anywhere in the world.
Broad Range of Applications
With today’s high-speed Internet services, the Network Camera can provide the ideal solution for delivering live video images over the Intranet and
Internet for remote monitoring. The Network Camera allows remote access using a Web browser for live image viewing, and allows the administrator
to manage and control the Network Camera anytime, anywhere in the world. Many applications exist, including industrial and public monitoring
of homes, oces, banks, hospitals, child-care centers, and amusement parks.
Remote Monitoring Utility
The D-ViewCam application adds enhanced features and functionality for the Network Camera and allows administrators to congure and access
the Network Camera from a remote site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing
up to 32 cameras on one screen, and taking snapshots.
IR LED for Day and Night Functionality
The built-in infrared LEDs enables night time viewing of up to 16 feet (5 meters).
Features

7D-Link DCS-6004L User Manual
Section 1: Product Overview
Hardware Overview
Front
1 IR LED Used to illuminate the camera's eld of view at night
2 microSD Card Slot Used to add storage for recording
3 Camera Sensor HD-capable CMOS sensor
4 Status LED Indicates the camera's current status
1
24
DCS-6004L
3

9D-Link DCS-6004L User Manual
Section 2: Installation
Insert the installation CD-ROM into your computer’s optical drive to start the Autorun program.
Simply click Set up your Cloud Camera to go through the Setup Wizard, which will guide you step-by-step through the
installation process from connecting your hardware to conguring your camera and registering it with your mydlink account.
Camera Installation Wizard
Windows Users
Note: If the Autorun program does not open, go to My Computer, browse to your CD drive, and double-click
on the autorun.exe le.

10D-Link DCS-6004L User Manual
Section 2: Installation
Insert the installation CD-ROM into your computer’s CD drive. On the desktop, open your CD drive and
double-click on the Setup_Wizard le.
Within 20-30 seconds, the Setup Wizard will open, which will guide you step-by-step through the installation process from
connecting your hardware to conguring your camera and registering it with your mydlink account.
Mac Users
Note: mydlink Web portal requires JavaTM to function correctly.
For more guidelines, please refer to mydlink FAQ pages at https://www.mydlink.com/faq/mydlink

11D-Link DCS-6004L User Manual
Section 2: Installation
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector located on
the panel at the rear of the DCS-6004L/ and attach it to the network.
Attach the External Power Supply
Attach the external power supply to the DC Power receptor located on the rear
panel of the DCS-6004L and connect it to your wall outlet or power strip.
Hardware Installation
Remove the Camera Housing
The camera housing needs to be separated from the camera base to expose
the screw used to adjust the viewing angle. Remove the camera housing from
the camera base by squeezing the housing release buttons on either side of the
camera. Once the housing is released, lift it up and o the camera base to expose
the Ethernet and power receptor.
Reattach the Camera Housing
Reattach the camera housing by lining up the housing so that the access port
on the housing matches the access port on the camera base. Firmly push down
until the camera housing snaps back onto the camera base.
Please refer to the steps below to assist you with hardware installation process for the camera.

12D-Link DCS-6004L User Manual
Section 2: Installation
Please refer to the steps below to assist you with mounting the camera.
Mounting the Camera
2. Place the mounting base alignment sticker where you want to position the camera.
Depending on the material of the wall or ceiling, use proper tools to drill two holes where
you placed the alignment sticker. If the wall is made out of concrete, drill the holes rst, then
insert the plastic anchors to support the screws.
4. With the D-Link logo facing you, reattach the camera to the mounting plate by sliding the
camera towards you until it locks into position.
5. Adjust the angle of the camera as desired, then tighten the collar on the camera stem to lock
it in place.
3. Place the mounting base over the holes that are in the wall. Make sure to align the mounting
base holes with the holes in the wall. Use the supplied screws to attach the mounting base to
the surface of the wall.
1. The camera needs to be separated from the mounting base to expose the holes in the
mounting base. Remove the camera head from the mounting base by firmly holding the
camera with the D-Link logo facing you and then sliding the mounting base towards you.
We suggest that you congure the camera before mounting.
Do not overtighten screws as this may crack the mount.
2
1
4
5
3
4

13D-Link DCS-6004L User Manual
Section 2: Installation
Adjusting the Viewing Angle
We suggest that you congure the camera before mounting.
2. Lift the camera housing up o the camera base once the housing has been released.
5. Use a philips head screwdriver to tighten the retaining screw used to secure the viewing angle of
the camera lens.
3. Use a philips head screwdriver to loosen the retaining screw used to secure the viewing angle of
the camera lens.
4. Manually adjust the viewing angle back and forth to your desired location.
Do not overtighten screw as this may crack the mount.
1. The camera housing needs to be separated from the camera base to expose the screw used to
adjust the viewing angle. Remove the camera housing from the camera base by squeezing the
housing release buttons on either side of the camera.
3
2
1
4
5
6
6. Reattach the camera housing by lining up the housing so that the access port on the housing
matches the access port on the camera base. Firmly push down until the camera housing snaps
back onto the camera base.
7. Refer to "Mounting the Camera" on page 12 to learn how to correctly mount the camera to its
permenant location.
Please refer to the steps below to assist you with adjusting the viewing angle of the camera.

14D-Link DCS-6004L User Manual
Section 3: mydlink
mydlink
After registering your DCS-6004L camera with a mydlink account in the Camera Installation Wizard. You will be able to
remotely access your camera from the www.mydlink.com website. After signing in to your mydlink account, you will see a
screen similar to the following:
For more details on using your camera with mydlink, go to the Support section of the mydlink website and check the User
Manual section for your product to nd the latest instruction guide for your camera's mydlink features.

15D-Link DCS-6004L User Manual
Section 4: Conguration
Conguration
Using the Conguration Interface
After completing the Camera Installation Wizard, you are ready to use your camera. The camera’s built-in Web conguration utility is designed to
allow you to easily access and congure your DCS-6004L. At the end of the wizard, enter the IP address of your camera into a web browser, such
as Mozilla Firefox. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password,
the default password is blank. After entering your password, click OK.

16D-Link DCS-6004L User Manual
Section 4: Conguration
Live Video
This section shows your camera’s live video. You may select any of the available icons listed below to operate the camera. You may also select your
language using the drop-down menu on the left side of the screen.
You can zoom in and out on the live video image using your mouse. Right-click to zoom out or left-click to zoom in on the image.
Motion Trigger
Indicator
This indicator will change color when a trigger event occurs.
Note: The motion detection feature for your camera must be
enabled.
Recording
Indicator
When a recording is in progress, this indicator will change
color.
Control Pad
This control pad can be used to electronically pan, tilt, and
zoom (ePTZ) within the camera's predened view area, if one
has been dened.
Auto Pan Starts the automatic panning function. The ROI will pan from
back and forth within the FOV
Stop Stops automatic panning.
Preset Path Starts the camera's motion along the predened path.
You may select a value between 0 and 5. 0 is the slowest and 5 is the
fastest.
This window indicates the total eld of view (FOV) of the camera. The red
box indicates the visible region of interest (ROI).
You may select the interface language using this menu.
If any presets have been dened, selecting a preset from this list will
display it.
ePTZ Speed:
Global View:
Language:
Go To:
(Preset List)
This option displays the status of the SD card. If no SD card has been
inserted, this screen will display the message "Card Invalid."
SD Status:
Video Prole 1
Video Prole 2
Taking a Snapshot

17D-Link DCS-6004L User Manual
Section 4: Conguration
Setup
Setup Wizard
To congure your Network Camera, click Internet Connection Setup
Wizard. Alternatively, you may click Manual Internet Connection
Setup to manually congure your Network Camera and skip to
"Network Setup" on page 23.
To quickly congure your Network Camera’s motion detection settings,
click Motion Detection Setup Wizard. If you want to enter your
settings without running the wizard, click Manual Motion Detection
Setup and skip to"Motion Detection" on page 35.

18D-Link DCS-6004L User Manual
Section 4: Conguration
Internet Connection Setup Wizard
This wizard will guide you through a step-by-step process to congure
your new D-Link Camera and connect the camera to the Internet. Click
Next to continue.
Note: Select DHCP if you are unsure of which settings to choose.
Click Next to continue.

19D-Link DCS-6004L User Manual
Section 4: Conguration
Select Static IP if your Internet Service Provider has provided you with
connection settings, or if you wish to set a static address within your
home network. Enter the correct conguration information and click
Next to continue.
If you are using PPPoE, select Enable PPPoE and enter your user name
and password, otherwise click Next to continue.
If you have a Dynamic DNS account and would like the camera to
update your IP address automatically, select Enable DDNS and enter
your host information. Click Next to continue.
Enter a name for your camera and click Next to continue.

20D-Link DCS-6004L User Manual
Section 4: Conguration
Congure the correct time to ensure that all events will be triggered as
scheduled. Click Next to continue.
If you have selected DHCP, you will see a summary of your settings,
including the camera's IP address. Please write down all of this
information as you will need it in order to access your camera.
Click Apply to save your settings.

21D-Link DCS-6004L User Manual
Section 4: Conguration
This wizard will guide you through a step-by-step process to
congure your camera's motion detection functions.
Click Next to continue.
Step 1
This step will allow you to enable or disable motion detection, specify
the detection sensitivity, and adjust the camera’s ability to detect
movement.
You may specify whether the camera should capture a snapshot or a
video clip when motion is detected.
Please see the Motion Detection section on "Motion Detection" on
page 35 for information about how to congure motion detection.
Click Next to continue.
Step 2
This step allows you to enable motion detection based on a customized
schedule. Specify the day and hours. You may also choose to always
record whenever motion is detected.
Click Next to continue.
Motion Detection Setup Wizard