D-Link DCS-6115 User manual

Documentation also available on
CD and via the D-Link Website
Quick Installation Guide
Краткое руководство по установке
DCS-6115
Quick Install Guide
HD Indoor Fixed Dome Camera with Color Night Vision

D-Link DCS-6115 Quick Install Guide 1
ENGLISH
DCS-6115 Quick Install Guide
This installation guide provides basic instructions for installing the DCS-6115 Network
Camera on your network. For additional information about how to use the camera, please
refer to the User Manual which is available on the CD included in this package or from the
D-Link support website.
Installation Steps
1. Verify the Package Contents
2. Hardware Overview
3. microSD Card Installation
4. Hardware Installation
5. Conguration with Wizard
6. Adjusting the 3-axis Gimbal
1. Package Contents
DCS-6115 Network Camera
Manual and Software on CD-ROM
Quick Install Guide
Power Adapter
CAT5 Ethernet Cable
Screws
4-Pin Terminal Block
Alignment Stencil
If any of the above items are missing, please contact your reseller.
Safety Notice:
Installation and servicing should be done by certied technicians so as to conform to all
local codes and prevent voiding your warranty.

D-Link DCS-6115 Quick Install Guide
2
ENGLISH
2. Hardware Overview
3. microSD Card Installation
Power Connector
Connects to 12V DC power
Ethernet Jack
RJ-45 connector for Ethernet
which can also be used to power
the camera using Power over
Ethernet (PoE)
Reset Button
Resets camera to factory
default settings
Audio In
Connects to a microphone
DI/DO Wiring, 12V DC output
I/O connectors for external
devices
Audio Out
Connects to speakers
Install the microSD Card
Push the microSD card into the camera with the gold
contacts oriented towards the base of the camera. To eject
the microSD card, push it into the slot.
Disassemble the Camera
Open the camera enclosure by pressing
the "PUSH" key. Lift the dome off the base
of the camera.
Note: This camera currently supports SDXC cards up to 64GB and in FAT32 format only.

D-Link DCS-6115 Quick Install Guide 3
ENGLISH
4. Hardware Installation
Mounting to a Ceiling or a Wall
1. Locate an area on the ceiling or wall which can support the weight of the camera.
2. Attach the alignment stencil to the ceiling or wall.
3. Drill two pilot holes where the holes of the alignment stencil are located.
4. Insert the supplied plastic anchors into the drilled holes and align the holes at the base
of the camera with the plastic anchors.
5. The camera can be mounted with the cables routed through the ceiling or wall, or left
exposed from the side.
6. Insert the provided screws through the holes. Use a screwdriver to tighten and secure.

D-Link DCS-6115 Quick Install Guide
4
ENGLISH
Note: To prevent the camera’s wire
connectors from being damaged by water
or other elements:
1. When connecting the camera, the
unsheathed part of the wire connectors
must either be sealed or enclosed in a
junction box.
2. The unsheathed part of the wire
connectors should be positioned at a
downward-facing angle when they extend
out of the rear of the camera, not upward.
Connection with a PoE Switch
If you are using a PoE switch, connect the IP camera to the switch via an Ethernet
cable, which will provide transmission of both power and data over a single cable.
General Connection Using 12V DC Power Adapter
1. Connect the network camera to a switch via an Ethernet cable.
2. Connect the supplied power adapter from the camera to a power outlet.

D-Link DCS-6115 Quick Install Guide 5
ENGLISH
5. Conguration with Wizard
Click Setup Wizard to begin the installation.
Insert the DCS-6115 CD into your computer's CD-ROM drive to begin the installation. If
the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start
automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter
of your CD-ROM drive.
After clicking Setup Wizard, the following window will open.
Click Next to continue.
Click Yes to accept the License Agreement.
Click Finish to complete the installation.
To start the installation process, click Next.
Note: The installation may take several minutes to
nish.

D-Link DCS-6115 Quick Install Guide
6
ENGLISH
Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Take a moment to conrm your settings and click
Restart.
Enter the Admin ID and password. When logging in for
the rst time, the default Admin ID is admin with the
password left blank.
Click Next to proceed to the next page.
The Setup Wizard will appear and display the MAC
address and IP address of your camera(s). If you have
a DHCP server on your network, a valid IP Address
will be displayed. If your network does not use a
DHCP server, the network camera's default static IP
192.168.0.20 will be displayed.
Click the Wizard button to continue.
Select DHCP if your camera obtains an IP address
automatically from your router or DHCP server. Select
Static IP if you want to manually assign IP settings to
your camera.
Click Next to proceed to the next page.

D-Link DCS-6115 Quick Install Guide 7
ENGLISH
Click on the D-Link Setup Wizard SE icon that was
created in your Windows Start menu.
Start > D-Link > Setup Wizard SE
Viewing Camera via Web Browser
This section shows your camera’s live video. You
can select your video prole and view or operate
the camera. For additional information about web
conguration, please refer to the user manual included
on the CD-ROM or at the D-Link website.
Select the camera and click the Link button to access
the web conguration.
The Setup Wizard will automatically open your web
browser to the IP address of the camera.
Enter admin as the default username and leave the
password blank. Click OK to continue.

D-Link DCS-6115 Quick Install Guide
8
ENGLISH
Remove the inner side of the black cover. Turn the lens module left or right
until the desired position is achieved.
6. Adjusting the 3-axis Gimbal
Additional Information
Additional help is available through our ofces listed at the back of the User Guide or online. To
learn more about D-Link products or marketing information, please visit http://www.dlink.com.
Warranty Information
Please visit http://warranty.dlink.com/ for warranty information for your region.
Rotate
335°
Tilt 70°
Turn the lens module up or down until the
desired position is achieved.
Hold the camera's base on both sides and turn
the lens to adjust the IP camera’s image until the
desired orientation is achieved.
Pan 340°

D-Link DCS-6115 Quick Install Guide 41
РУССКИЙ
DCS-6115 Краткое руководство по
установке
Руководство по установке содержит основные инструкции по установке новой
сетевой камеры DCS-6115. За дополнительной информацией по установке камеры,
пожалуйста, обратитесь к руководству пользователя на CD-диске, входящем в
комплект поставки, или на сайте технической поддержки D-Link.
Шаги установки
1. Проверьте комплект поставки
2. Обзор устройства
3. Установка карты microSD
4. Установка устройства
5. Настройка с помощью мастера по установке
6. Регулировка 3-х осевой линзы
1. Комплект поставки
IP-камера DCS-6115
CD-диск с руководством пользователя и программным обеспечением
Краткое руководство по установке
Адаптер питания
Ethernet-кабель 5 категории
Винты
4-х контактный блок
Если что-либо из перечисленного отсутствует, пожалуйста, обратитесь к
поставщику.
Примечание по безопасности:
Установка и обслуживание устройства должны выполняться сертифицированным
специалистом в соответствии с местными законами и с сохранением гарантии.