D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... User manual

DAP-3520
AirPremier N Dual Band PoE Access Point
Command Line Interface Reference Manual
First Edition (August 2008)
RECYCLABLE

Table of Contents
Using the CLI.............................................................................................................................................................................................................................................1
Wireless Commands...................................................................................................................................................................................................................................9
LAN Commands.......................................................................................................................................................................................................................................12
WLAN Partition Commands....................................................................................................................................................................................................................13
VLAN Commands.....................................................................................................................................................................................................................................14
RADIUS and Accounting Server Commands ..........................................................................................................................................................................................15
SNMP Commands....................................................................................................................................................................................................................................16
SNTP Commands.....................................................................................................................................................................................................................................17
TFTP Commands .....................................................................................................................................................................................................................................18
DHCP Server Commands ........................................................................................................................................................................................................................19
Limit Administrator Commands..............................................................................................................................................................................................................21
Intrusion Commands ...............................................................................................................................................................................................................................22
Multiple SSID and VLAN Commands.....................................................................................................................................................................................................23
IGMP Commands.....................................................................................................................................................................................................................................25
QoS Commands........................................................................................................................................................................................................................................26
System Log Commands............................................................................................................................................................................................................................27
Access Control List Commands................................................................................................................................................................................................................28

Schedule Commands................................................................................................................................................................................................................................29
Utility and Miscellaneous Commands.....................................................................................................................................................................................................30
First-Time Configuration Examples........................................................................................................................................................................................................31

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
1
1
USING THE CLI
The DAP-3520 can be accessed by Telnet. Using a Microsoft Windows system as an example, open the Command Prompt on the computer that will be used for
configuring and managing the AP and enter telnet and the IP address of DAP-3520 in the first line. Using the default IP address as example, enter telnet 192.168.0.50 to
cause the following screen to open:
Press Enter in the screen above. The following screen opens:

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
2
Type admin for the D-Link Access Point login username in the screen above and press Enter. The following screen opens:

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
3
Press Enter as there is no initial password.
The following screen opens to indicates you have successfully logged into the Access Point.

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
4
Commands are entered at the command prompt, WAP¡ >

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
5
There are a number of helpful features included in the CLI. Entering the ?command and then pressing Enter will display a list of all of the top-level commands. The same
information can also be displayed by entering help.
Press Enter to see a list of all the available commands. Alternatively, you may enter help and the press Enter.

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
6
When you enter a command without all of its required parameters, the CLI will prompt you with a list of possible completions. For example, if tftp was entered, the
following screen opens:

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
7
This screen displays all the possible command completions for tftp.
When you enter a command without a variable or value that needs to be specified, the CLI will prompt you with further information about what is needed to complete the
command. For example, if snmp delcomm was entered, the following screen opens:

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
8
The missing value for the snmp delcomm command, ¡CommunityString<string>,¡ is displayed in the screen above.

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
9
2
WIRELESS COMMANDS
Wireless Command Description
del key Delete Encryption key (index:1--4)
get acktimeout Display acknowledgement timeout
get key Display Encryption Key (index:1--4)
get apmode Display AP operation mode
get assoclimitstatus Display association limit setting status
get authentication Display authentication type
get autochannel Display auto channel
get ap_band Display AP Band
get Channeltype Display Channel type(indoor/outdoor)
get availablechannel Display available channel list
get beaconinterval Display beacon interval
get channel Display channel
get cipher Display encryption cipher
get clientinfo Display client info
get cwm Display CWM
get defkeyindex Display default key index
get dtim Display DTIM
get fixedrate Display fixed rate
get groupkeyupdate Display group key update interval (in sec)
get shortgi Display Shortgi
get keyentrymethod Display encryption key entry method [index: 1--4]

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
10
get keylength Display encryption key length (in bits)[index: 1--4]
get ssid Display Service Set ID
get ssidhidden Display SSID hidden
get txpower Display TX power
get wdsinfo Display WDS info
get wdsmac Display WDS MAC address list
get wdsscaninfo Display WDS site survey info
get wireless Display wireless
get wlmode Display Wlmode
get wmm Display WMM
get macclonetype Display MAC address clone type
get maccloneaddr Display MAC clone address
get mcastrate Display mcast rate
get rogue_ap Display Rogue AP List
set acktimeout_a Set acktimeput in A band (range: 25--200)
set acktimeout_g Set acktimeput in G band (range: 48--200)
set ap_band Set ap band (2.4G or 5G)
set apmode Set AP operation mode
set band Set band (0:2.4G, 1:5G)
set assoclimit Set Association Limit
set authentication Set authentication type
set autoChannel Set auto channel
set beaconinterval Set beacon interval (range: 25--500)
set cipher Set Cipher of wep,tkip,aes, or auto
set Channeltype Set Channel type
set cwm Set CWM
set channel Set Channel

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
11
set defkeyindex Set default key Index [1--4]
set dtim Set DTIM (1--15)
set fixedrate Set fixerd rate
set groupkeyupdate Set group key update interval (in secs: 0 (no update) or 300-99999)
set key Set encryption key index [1--4][value]
set keyentrymethod Select Encryption Key Entry Method of key [index 1--4]
set keylength Set Encryption Key Length of key Index [1--4]
set macclonetype Set MAC address clone type
set maccloneaddr Set MAC clone address
set mcastrate Set mcast rate
set passphrase Modify passphrase (size: 8--63)
set radiusip Set RADIUS IP address
set radiusport Set RADIUS port number
set radiussecret Set RADIUS shared secret (size: 1--64)
set ssid Set Service Set ID
set ssidhidden Set SSID hidden
set shortgi Set Shortgi
set txpower Set TX power
set wdsmacadd Add WDS MAC address <macaddress xx:xx:xx:xx:xx>[Index]
set wdsmacdel Delete WDS MAC address [Index]
set wdsscan Set WDS site survey
set wireless Set wireless
set wlmode Set Wlmode
set wmm Set WMM

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
12
3
LAN COMMANDS
LAN Command Description
get ethernetcount Display Ethernet count
get gateway Display gateway IP address
get ipaddr Display IP address
get ipmask Display IP subnet mask
get ipmode Display IP mode
set gateway Set gateway IP address
set ipaddr Set IP address
set ipmask Set IP subnet mask
set ipmode Set IP Mode(Static or Dynamic)

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
13
4
WLAN PARTITION COMMANDS
WLAN Partition Command Description
get e_partition Display ethernet_partition
get ethlink Display Ethernet integration
get w_partition Display w_partition
set e_partition Set ethernet_partition
set ethlink Set Ethernet integration
set w_partition Set w_partition

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
14
5
VLAN COMMANDS
VLAN Command Description
get vlanstate Display VLAN state
get vlanmode Display VLAN mode
get autosetpvid Display auto setting pvid by group VID
get pvid_primary Display primary SSID PVID
get pvid_eth Display ethernet PVID
get pvid_sys Display system PVID
get groupvid_primary Display wlan port member of group VID
get groupvid_eth Display LAN port member of group VID
get groupvid_sys Display System port member of group VID
set vlanstate Set VLAN state
set vlanmode Set VLAN mode
set autosetpvid Auto setting pvid by group VID
set pvid_primary Set primary SSID PVID
set pvid_eth Set ethernet PVID
set pvid_sys Set system PVID
set groupvid_primary Set wlan port member of group VID
set groupvid_eth Set LAN port member of group VID
set groupvid_sys Set system port member of group VID
set groupviddel Delete port member of group VID
set groupvidname Set Service Set ID

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
15
6
RADIUS AND ACCOUNTING SERVER COMMANDS
RADIUS and Accounting Command
Description
get radiusip Display RADIUS server IP address
get radiusport Display RADIUS port number

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
16
7
SNMP COMMANDS
SNMP Command Description
snmp addcomm Add Communication String
snmp addgroup Add User Group
snmp addhost Add Host To Notify List
snmp adduser Add User To SNMP Agent
snmp addview Add User View
snmp delcomm Delete Communication String
snmp delgroup Delete User Group
snmp delhost Delete Host From Notify List
snmp deluser Delete User From SNMP Agent
snmp delview Delete User View
snmp editpubliccomm Edit Communication String
snmp editprivatecomm Edit Communication String
snmp resume Resume SNMP Agent
snmp settrap Set Trap status
snmp showcomm Show Communication String
snmp showgroup Show User Group
snmp showhost Show Host In Notify List
snmp showtrap Show Trap status
snmp showuser Show User In SNMP Agent
snmp showview Show User View
snmp status Display SNMP Agent status
snmp suspend Suspend SNMP Agent

AirPremier N Dual Band PoE Access Point Command Line Interface Manual
17
8
SNTP COMMANDS
SNTP Command Description
get daylightsaving Display daylight saving time
get sntpserver Display SNTP/NTP server IP address
get tzonelist Display time zone
set daylightsaving Set daylight saving time
set sntpserver x.x.x.x Set SNTP/NTP server IP address
set tzone Set time zone setting