D-Link DWL-3260AP - AirPremier - Wireless Access... User manual

2
Table of Contents
Table of Contents
Table of Contents ............................................................................. 2
Package Contents ............................................................................ 3
Introduction ..................................................................................... 4
Features and Benefits....................................................................... 6
Wireless Basics................................................................................ 7
Three Operational Modes...............................................................10
Getting Started............................................................................... 11
Using the Configuration Menu ....................................................... 13
Product Specifications ................................................................... 55

3
D-Link AirPremierTM DWL-3260AP
Managed Wireless Access Point
Power over Ethernet base unit
Power Adapter-DC 48V, 0.4A
Power Cord
Manual and Warranty on CD
Quick Installation Guide
Ethernet Cable
Package Contents
Minimum System Requirements
Note: Using a power supply with a different voltage than the one included with the
DWL-3260AP will cause damage and void the warranty for this product.
If any of the above items are missing, please contact your reseller.
Computers with Windows®, Macintosh®, or Linux-based operating systems with
an installed Ethernet Adapter
Internet Explorer version 6.0 or Netscape Navigator™version 7.0 and above
Package Contents
Mounting Plate

4
The D-Link AirPremier DWL-3260AP is a powerful and reliable wireless access point for business-
class enterprise environments. Designed for indoor installation, this access point provides
advanced functions including 108Mbps Turbo speed, security, Quality of Service (QoS), and
Power over Ethernet (PoE) for network administrators to deploy a highly manageable and robust
wireless network.
Up to 108Mbps Wireless Speed. The DWL-3260AP delivers reliable wireless performance with
standard 802.11g wireless throughput rates of up to 54Mbps. It is also capable of reaching
maximum wireless signal rates of up to 108Mbps (Turbo mode) powered by D-Link 108G
technology. At the same time, the DWL-3260AP remains fully compatible with the IEEE 802.11b
and 802.11g standards.
Power Over Ethernet Support. For maximum coverage, the DWL-3260AP can be placed at
inconvenient locations such as on a ceiling, using a mounting plate. Industry-standard 802.3af PoE
support facilitates installation of this device on high places, where AC outlets are inaccessible and
providing power to these locations is difcult and expensive. From the ceiling, the DWL-3260AP
can obtain power from a PoE switch located as far as 100 meters away through the unused pairs
of the existing network cable, doing away with the need to install separate power wiring.
Ceiling Mounting. The DWL-3260AP has a round shape and can be camouaged as a smoke
detector to discourage the attention of network intruders. Its diagnostic LED can be turned off to
make it appear even more like a smoke detector.
Advanced Wireless Security. Since wireless security remains a strong concern among
businesses, the DWL-3260AP provides the latest wireless security technologies by supporting
both WPA/WPA2-Enterprise and 802.1x to ensure complete network protection. In addition, the
DWL-3260AP currently comes 802.11i-ready to fully support industrial grade wireless security.
Other security features included in this Access Point are MAC Address Filtering, Wireless LAN
segmentation, Broadcast SSID Disabled, and support for Advanced Encryption Standard (AES)
data encryption.
WDS (Wireless Distribution System) Support. To maximize total return on investment, the DWL-
3260AP can be congured to operate as an access point (AP mode), a point-to-point bridge or
a point-to-multipoint bridge (WDS mode). In the AP mode, the DWL-3260AP uses its built-in
omni-directional antenna for multi-angle coverage. In the WDS mode, the DWL-3260AP can be
mounted on a high wall and externally tted with an optional directional antenna through its SMA
connector. Users will disable the built-in antenna through a slide switch, and the DWL-3260AP will
communicate only with wireless bridges, using the external directional antenna, without allowing
wireless clients or workstations to access them.
Introduction
Introduction
*”Maximum wireless signal rate derived from IEEE Standard 802.11g specications. Actual data throughput will vary. Network conditions and
environmental factors, including volume of network trafc, building materials and construction, and network overhead lower actual data throughout
rate.”

5
Introduction
Increased Network Flexibility and Efciency. The DWL-3260AP supports multiple SSIDs, allowing
you to separate applications based on security and performance requirements. You can enable
encryption and authentication on one SSID to protect private applications and assign no security
on another SSID to maximize open connectivity for public usage. Multiple SSIDs means you
can mix and match the broadcasting of SSIDs. For public Internet access applications, you can
broadcast the SSID to enable user radio cards to automatically nd available access points. For
private applications, you can disable SSID broadcast to prevent intruders from identifying your
network. You can set the number of users that can associate via a particular SSID to control
usage of particular applications. This can help provide a somewhat limited form of bandwidth
control for particular applications.
Cost Saving and Mobile Applications. By supporting multiple SSIDs, the DWL-3260AP allows you
to logically divide your access point into several virtual access points all within a single hardware
platform. Rather than having two separate WLANs, you can deploy one access point to support
more than one application, such as public Internet access and internal network control to increase
exibility and keep costs down.
Advanced Network Management. Network administrators can manage all the DWL-3260AP's
settings via its web-based conguration utility or with Telnet. For advanced network management,
the administrators can use D-Link's AP Manager II or D-View SNMP management module to
congure and manage multiple access points from a single location. In addition to a streamlined
management process, network administrators can also verify and conduct regular maintenance
checks without wasting resources by sending personnel out to physically verify proper
operation.

6
For Business-Class Environments - The DWL-3260AP is designed to be in smoke
detector shape, with is ideal for mounting on ceilings or other indoor deployments. It
also comes with an optional RP-SMA external directional antenna for communicating
with another DWL-3260AP.
3 Different Operation modes - Capable of operating in one of three different
operation modes to meet your wireless networking requirements: Access Point;
WDS with AP, or WDS.
Easy Installation with PoE (Power over Ethernet).
Faster wireless networking with the 802.11g standard to provide a maximum
wireless signal rate of up to 54Mbps* (maximum wireless signal rate of up to
108Mbps* in Super G mode).
Compatible with the 802.11b standard to provide a wireless data rate of up to
11Mbps - that means you can migrate your system to the 802.11g standard on
your own schedule without sacricing connectivity.
Better security with WPA - The DWL-3260AP can securely connect wireless
clients on the network using WPA (Wi-Fi Protected Access) providing a much
higher level of security for your data and communications than was previously
available.
AP Manager II management software - the real-time display of the network's
topology and AP’s information makes network conguration and management
quick and simple.
SNMP for Management - The DWL-3260AP is not only fast but it also supports
SNMP v.3 for better network management. Superior wireless AP manager
software is bundled with the DWL-3260AP for network conguration and
rmware upgrade. Systems administrators can also setup the DWL-3260AP
easily with the Web-based conguration. A D-Link D-View module will be
downloadable for network administration and real-time network trafc monitoring
with D-Link D-View software.
Utilizes OFDM technology (Orthogonal Frequency Division Multiplexing).
Operates in the 2.4GHz frequency range.
Web-based interface for managing and conguring.
Features and Benefits
Features and Benefits
*”Maximum wireless signal rate derived from IEEE Standard 802.11a and 802.11g specications. Actual data throughput will
vary. Network conditions and environmental factors, including volume of network trafc, building materials and construction, and
network overhead lower actual data throughout rate.”

7
Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible
high-speed wireless connectivity within your home, business or public access wireless networks.
D-Link wireless products will allow you access to the data you want, when and where you want
it. You will be able to enjoy the freedom that wireless networking brings.
A Wireless Local Area Network (WLAN) is a computer network that transmits and receives
data with radio signals instead of wires. WLANs are used increasingly in both home and ofce
environments, and public areas such as airports, coffee shops and universities. Innovative ways to
utilize WLAN technology are helping people to work and communicate more efciently. Increased
mobility and the absence of cabling and other xed infrastructure have proven to be benecial
for many users.
People use WLAN technology for many different purposes:
Mobility - Productivity increases when people have access to data in any location within the
operating range of the WLAN. Management decisions based on real-time information can
signicantly improve worker efciency.
Low Implementation Costs - WLANs are easy to set up, manage, change and relocate. Networks
that frequently change can benet from WLANs ease of implementation. WLANs can operate in
locations where installation of wiring may be impractical.
Installation and Network Expansion - Installing a WLAN system can be fast and easy and
can eliminate the need to pull cable through walls and ceilings. Wireless technology allows the
network to go where wires cannot go - even outside the home or ofce.
Inexpensive Solution - Wireless network devices are as competitively priced as conventional
Ethernet network devices. The DWL-3260AP saves money by providing multi-functionality that
is congurable in one of four different modes.
Scalability - WLANs can be congured in a variety of ways to meet the needs of specic
applications and installations. Congurations are easily changed and range from Peer-to-Peer
networks suitable for a small number of users to larger Infrastructure networks to accommodate
hundreds or thousands of users, depending on the number of wireless devices deployed.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards
used on laptop and desktop systems support the same protocols as Ethernet adapter cards.
Wireless Basics

8
Standards-Based Technology
The DWL-3260AP Managed Wireless Access Point utilizes the 802.11b and the 802.11g
standards.
The IEEE 802.11g standard is an extension of the 802.11b standard. It increases the maximum
wireless signal rate by up to 54Mbps* (maximum wireless signal rate of up to 108Mbps* in Super
G mode) within the 2.4GHz band, utilizing OFDM technology.
This means that in most environments, within the specied range of this device, you will be able
to transfer large les quickly or even watch a movie in MPEG format over your network without
noticeable delays. This technology works by transmitting high-speed digital data over a radio
wave utilizing OFDM (Orthogonal Frequency Division Multiplexing) technology. OFDM works by
splitting the radio signal into multiple smaller sub-signals that are then transmitted simultaneously
at different frequencies to the receiver. OFDM reduces the amount of crosstalk (interference)
in signal transmissions.
The D-Link DWL-3260AP will automatically sense the best possible connection speed to ensure
the greatest speed and range possible.
802.11g offers the most advanced network security features available today, including WPA and
WPA2.
Wireless Basics
*”Maximum wireless signal rate derived from IEEE Standard 802.11g specications. Actual data throughput will vary. Network
conditions and environmental factors, including volume of network trafc, building materials and construction, and network overhead
lower actual data throughout rate.”

9
Wireless Basics
The D-Link AirPremier DWL-3260AP lets you access your network, using a wireless connection,
from virtually anywhere within its operating range. Keep in mind, however, that the number,
thickness and location of walls, ceilings, or other objects that the wireless signals must pass
through, may limit the range. Typical ranges vary depending on the types of materials and
background RF (radio frequency) noise in your home or business. The key to maximizing wireless
range is to follow these basic guidelines:
Keep your product away (at least 3-6 feet or 1-2 meters) from electrical devices or
appliances that generate RF noise.
4
Keep the number of walls and ceilings between the DWL-3260AP and other network
devices to a minimum - each wall or ceiling can reduce your DWL-3260AP’s range
from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or
ceilings is minimized.
1
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a
2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the
signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
2
Building materials can impede the wireless signal - a solid metal door or aluminum
studs may have a negative effect on range. Try to position wireless devices and
computers with wireless adapters so that the signal passes through drywall or open
doorways and not other materials.
3

10
Three Operational Modes
Three Operational Modes

11
Getting Started
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to a Router.
(See the printed Quick Installation Guide included with your router.)
If you are connecting a desktop computer to your network, install the D-Link
WDA-2320 wireless PCI adapter into an available PCI slot on your desktop
computer.
(See the printed Quick Installation Guide included with the network adapter.)
Install the drivers for the D-Link WNA-2330 wireless Cardbus adapter into a
laptop computer.
(See the printed Quick Installation Guide included with the WNA-2330.)
Connect the DWL-3260AP to the PoE base unit.
(See the printed Quick Installation Guide included with the DWL-3260AP.)
Connect the Ethernet Broadband Router to the PoE base unit.
(See the printed Quick Installation Guide included with the DWL-3260AP.)
2
3
4
5
6
7
You will need broadband Internet access.
1
Getting Started

12
Getting Started
Connecting PoE (Power over Ethernet)
Connect one end of an Ethernet cable (included with your package) to the
LAN port on the DWL-3260AP and the other end of the Ethernet cable to the
port labeled P+DATA OUT on the PoE base unit.
Connect another Ethernet cable from the DATA IN port on the PoE base
unit to your router/switch, using a straight through cable, or to a PC, using a
crossover cable.
Attach the power adapter to the connector labeled POWER IN on the PoE
base unit. Attach the power cord to the power adapter and into an electrical
outlet.
Step 1
Step 2
Step 3

13
Using the Configuration Menu
Using the Configuration Menu
To congure the DWL-3260AP, use a computer which is connected to the DWL-3260AP with an
Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function. To disable this function,
go to Control Panel > Internet Options > Connections > LAN Settings and uncheck the
enable box.
Start your web browser program (Internet Explorer, Netscape Navigator™) .
Type the IP address and http port of the DWL-3260AP in the address eld
(http://192.168.0.50) and press Enter. Make sure that the IP addresses of the
DWL-3260AP and your computer are in the same subnet.
After the connection is established, you will see the user identication window as shown.
Note: If you have changed the default IP address assigned to the DWL-3260AP, make sure to
enter the correct IP address.

 



Type admin in the User Name eld
Leave the Password eld blank
Click OK
Note: If you have changed the password, make sure to enter the correct password.

14
Using the Configuration Menu
After successfully logging into the DWL-3260AP the following screen appears:
When making changes on most of the conguration screens in this section, use the Apply button
at the bottom of each screen to save your conguration changes.
Click to apply conguration changes.

15
Using the Configuration Menu
Home > Basic Settings > Wireless
Access Point is selected from the pull-down menu.
Service Set Identier (SSID) is the name designated for a specic
wireless local area network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
The SSID can be up to 32 characters and is case-sensitive.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Auto Channel Scan is set by default. All devices on the network
must share the same channel. To change the channel, uncheck Auto
Channel Scan. (Note: The wireless adapters will automatically scan
and match the wireless setting.)
Mode:
SSID:
SSID Broadcast:
Channel:
Wireless Band: IEEE 802.11g

16
Auto Channel
Scan:
Authentication:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Open System
Shared Key
Open System/Shared Key
WPA-Enterprise
WPA-Personal
WPA2-Enterprise
WPA2-Personal
WPA-Auto-Enterprise
WPA-Auto-Personal
Home > Basic Settings > Wireless (continued)
Select Open System to communicate the key across the
network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Enterprise, WPA2-Enterprise, WPA-Auto-Enterprise
to secure your network with the inclusion of a RADIUS server.
Select WPA-Personal, WPA2-Personal, WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS server required).
Using the Configuration Menu
Valid Key:
First through
Fourth keys:
Encryption: Select Disabled or Enabled. (Disabled is selected here).
Key Type*:
Key Size:
Input up to four keys for encryption. You will select one of these
keys in the valid key eld.
*Hexadecimal digits consist of the numbers 0-9 and the letters A-F
*ASCII (American Standard Code for Information Interchange) is a code for
representing English letters as numbers from 0-127
Select HEX or ASCII.
Select 64-, 128-, 152-bits.
Select the 1st through the 4th key to be the active key.

17
Home > Basic Settings > Wireless > WPA-Enterprise, WPA2-Enterprise, &
WPA-Auto-Enterprise
Using the Configuration Menu
Cipher Type:
Group Key Update
Interval:
When you select WPA-Enterprise, you must select AUTO, AES,
or TKIP from the pull down menu.
Select the interval during which the group key will be valid.
1800 is the recommended value. A lower interval may reduce data
transfer rate.
RADIUS Server: Enter the IP address of the RADIUS server.
RADIUS Port: Enter the RADIUS port.
RADIUS Secret: Enter the RADIUS secret.
Accounting Server:
Accounting Port:
Accounting Mode:
Enter the Accounting port (1813 is default).
Enter the IP address of the Accounting server.
Select if you want to use a different server for accounting.
Note: you can input the secondary RADIUS server and accounting server settings if you have the backup RA DIUS and account-
ing server.

18
Home > Basic Settings > Wireless > WPA-Personal, WPA2-Personal, &
WPA-Auto-Personal
Cipher Type:
Group Key Update
Interval:
Select the interval during which the group key will be valid. The
default value of 1800 is recommended.
When you select WPA-Personal, please select AUTO, AES, or
TKIP from the pull down menu.
PassPhrase: When you select WPA-Personal, please enter a PassPhrase in
the corresponding eld.
Using the Configuration Menu

19
Home > Basic Settings > Wireless > WDS with AP mode
WDS with AP mode is selected from the pull-down menu.
Service Set Identier (SSID) is the name designated for a specic
wireless local area network (WLAN). The SSID’s factory default
setting is dlink. The SSID can be easily changed to connect to an
existing wireless network or to establish a new wireless network.
Enable or Disable SSID broadcast. Enabling this feature broadcasts
the SSID across the network.
Mode:
SSID:
SSID Broadcast:
Wireless Band: IEEE 802.11g
In WDS with AP mode, the DWL-3260AP wirelessly connects multiple networks, while still
functioning as a wireless AP.
Using the Configuration Menu

20
Home > Basic Settings > Wireless > WDS with AP (continued)
Auto Channel
Scan:
Remote AP MAC
Address:
Select Enable or Disable. (Enable this feature to auto-select the
channel for best wireless performance.)
Enter the MAC addresses of the APs in your network that will serve
as bridges to wirelessly connect multiple networks.
Authentication: Open System
Shared Key
Open System/Shared Key
WPA-Personal
WPA2-Personal
WPA-Auto-Personal
Select Open System to communicate the key across the network.
Select Shared Key to limit communication to only those devices
that share the same WEP settings.
Select Open System/Shared Key to allow either form of data
encryption.
Select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal to
secure your network using a password and dynamic key changes.
(No RADIUS Server required).
Using the Configuration Menu
WDS Site Survey:
Click on the Scan button to search for available wireless networks.
Click on the network you want to connect to.
Channel: 6is the default channel. All devices on the network must share the
same channel. (Note: The wireless adapters will automatically scan
and match the wireless setting.)