
1.Eachtimethebuttonispressed,themodeischangedsequentially
betweenlevel1,2,3,AUTOandpoweroff.
(AUTOmodeonlyappliestoM1+models.)
2.Afterentering"AUTO"mode,theLEDflashesbycolorandthen
eachLEDisrepeatedlyturnedonandoffonebyoneclockwise.
(ThisoperationonlyappliestoM1+models.)
[M1+AUTOmode]
1.VOCsensoroperatestheproperautomode,dependingontheconditionofinnerairand
controlstheaircirculation.
2.LEDcolorsisdisplayed,dependingonthestandardofPuripottoshowthequalityofinnerair.
3.IfyouthinktheconditionofinnerairandcolorsofLEDdonʼtmatch,pleaseswitchonthepuripot
afterventilationfor24hoursoftheroom.Thenpuripotwillbeworkedwell.
·UsetheUSBcable(C-type)providedtoconnecttheproducttothepower
source
·Thedefaultfanspeedissettoʻlevel1ʼwhentheproductisfirstshipped
fromthefactory.
·TheLEDontheoperationmodebuttonoftheproductcanbeusedasa
moodlightinadarkenvironment.
·Youcanturnonoroffonlythemoodlightintheproductwhileitisona
normaloperationmode.
ConnectingPower
LEDMoodLightOn/Off
AdjustingOperationMode
1.TheLEDmoodlightwillbeturnedoffwhenyoupressandhold
theoperationmodebuttonformorethanonesecond.
2.PressingtheoperationmodebuttonwillturntheLEDbackon.
Level1 Level2 Level3
Blue:Good Green:Fair Yellow:Bad Red:VeryBad