Daewoo RC-701M User manual

Model : RC-701M
VACUUM CLEANER
INSTRUCTION MANUAL
■ Read the instruction manual carefully before using this vacuum
cleaner!
■ Please don’t throw away, to protect environment this unit with
daily rubbish together.

32
FEATURES
■Streamline mold-making and original design, representing modern fashionable life.
■With strong suction power
1600W/1800W motors, strong suction power.
■Multi-filter to avoid the second air pollution
Using the multi-filter system ensures cleaning out all the dust, and keep the air clean from
the outlet.
■One appliance fit with various suction nozzles for multi-purposes
Various suction nozzles are used to suck up dust on carpet or hard floor but also to remove
dust on wall, ceiling, couch, bed and all home electric appliance.
■Pedal on/off buttons for easy operation
Pedal on/off buttons can release you from stooping for easy operation.
■Suction power with freely regulation
To regulate the suction power on the air flow handle and unit.
■Dust bag full indicator function
When the dust bag or the air filter is full of dust, the dust full indicator on top of the body will
be covered by red indications. This shows that you need to empty the dust bag or clean the
air filter.
Warning: This appliance is for household use only, It is only used indoors
for dust, but not applied for industrial or decorating areas. It can
not suck in water.
DESCRIPTION OF THE PARTS
Combi
crevice nozzle Sofa brush

54
PRECAUTIONS HOW TO ASSEMBLE
■ Before using, please make sure the network voltage coincides with the product rated voltage.
■ When in use, do not block or shelter the rear outlet cover to avoid influencing normal air
exhaustion. Otherwise, the motor will be damaged by overheat.
■ If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
■ Keep the appliance away from stove or any other high temperature objects
so as not to influence its operation by deforming its plastic parts.
■ Do not bend, extrude or pull by the flexible hose, Stop using the broken or
damaged hose, instead to use the new hose.
■ When you need to clean or repair your appliance or stop operation, unplug
from the power outlet. When unpluging, be sure to hold the plug, but not pull
or carry by the power cord.
■ Never use the appliance without dust bag or when the dust bag is broken or
not assembled .
■ When sucking, do not suck up particles as mud, paste ,wall ashes, or sharp
articles. otherwise it may result in obstruction to the dust bag or air filter or
damage to the motor. If sucking up these particles, please immediately clean
the dust bag and air flow filter.
■ When in use, do not suck up suck hair rolls, large paper rolls or plastic bags
which may easily lead to block the suction hole or suction tube or hose.
Other wise it may cause breakdown or deforming of body cover. If any block
occur to the suction ,immediately stop operation by unplugging from the
outlet for cleaning.
■ When cleaning the appliance, wet cloth soaked with water or neutral
detergent shall be used instead of gasoline or banana water. Otherwise it
may lead to breakage of fadeness of the body cover.
■ Press the button on top of
the plastic suction tube head
and then push it in the
direction of air inlet hole till
locked
■ When discharge the hose,
press the button on top of
the plastic suction tube head
and then pull it out towards
you.
■ How to use connecting
tubes and curved wand?
When connecting, insert the
bigger end of the connecting
tube into air flow handle and
then swivel it to firm
connection.
■ Connection of the tubes.
Refer to the above said.
■ Connection of connecting
tube with floor brush. For
connection, insert the
smaller end of connecting
tube into the tube on the
floor brush, and then swivel
it to firm connection.
■ Regarding the connection of
connecting tubes with
crevice nozzle, refer to the
above said.

76
USING INSTRUCTION
■ Pull out the power cord
The power cord can be pulled out as long as it is marked with yellow color.
It is forbidden to exceed the red mark
■ Power button
After plugging into electrical power outlet, press the power button on the body
cover to control start and stop.
■ Regulation of suction power
To control the input power and suction power by regulating the knobs.(fig.1)
To control the suction power by the air flow regulator on the air flow handle.
To push ahead, suction power will minish; to push backwards, suction power will increase.(fig.2)
■ For corner or crevice place, you can use combi nozzle
■ For couch, curtain or decoration surfaces, the sofa brush should be used.
And the floor brush is used for blanket and floor.
■ Cleaning dust bag and replacing parts.
When the cleaner indicator on top of the body is filled with red indications, it
means the dustbag is full of dust. You need to replace paper dustbag and
clean the air filter when clogged.
■ Replacing the dust bag
1) Lift up by the front cover clamp to open the front cover (fig.3)
2) To take out the dustbag from dustbag holder.(fig.4)
3)
If you use a paper dust bag , replace it with a new one. If a cloth dust bag, take out the clip and open the dust bag
to empty dust then insert it back to its position for further use by sealing the bag well with the clip.(fig.5)
4)Assembling the dust bag, you should press the clamp button on the bag holder, and insert the dust bag into
the two slots, then release the button to clip the dust bag.(fig 6)
5) If the dust bag is broken, replace it immediately.
■ Replacing the front cover and turn the dust bag holder over to take out the
filter for cleaning or replace a new one.
■ Replacing the air outlet filter
Press the clamp position of the air outlet cover to discharge the air outlet
cover for clean up or a new replacement.
■ Cleaning the air inlet and outlet filter.
1) Put the filter into running water for rinsing.
2) Remove some water by patting the filter with towel, then dry it in cool place.
3) Dry the filter in a ventilation place, take care not to bake it so as to avoid being
deformed by high temperature.
Warning: Neither wash the filter in a washing machine nor bake it with a hair
dryer.
(fig.1) (fig.2)
(fig.3) (fig.4) (fig.5) (fig.6)

8 9
■ Power cord rewinding
When not in use, unplug from the electrical power outlet and then press the
cord rewinding button to feed back the power cord.
■ For storage
Insert the plastic holder of the Connecting tube into the unit
base or holder hook on the back unit.
■ Put the combination crevice nozzle in the accessory hole in the bottom of
the body after finishing suction.
TROUBLE SHOOTING GUIDE
■ Please check the following details before you have your appliance repaired in an authorized
servicing department.
Problem
Motor does
not work
1. Check if the power plug is firmly.
inserted into the outlet.
2. Check if the power switch of the
appliance is on.
3. Check if the heat sensitive thermostat
be off due to overheating.
1. Insert the plug back again into the outlet to
secure it is switched on.
2.And then turn the power switch on.
3.After the motor be cool off,the unit will
restart working automatically.
Suction power
becomes
weak
1. Check if the hose, floor brush or
connecting tube is clogged.
2. Check if the dust is full;
3. Check if the air filter is clogged, the
connecting tube is correctly attached.
1. Immediately remove the obstruction.
2. empty dust.
3. Clean the dust bag for reassembly of
connecting tubes.
Power cord
will not fully
feed back
■ Check if the power cord is twisted Pull out the power cord at its certain length
and rewind it.
Power cord
can not be
taken out
■ The power cord may be twisted Rewind or pull the cord in or out for sevreral times by pressing the power cord rewind
button.
Power cord
rewinds itself
■ The inertial rewinding by the cord
rewinder device may lead to be out
of control.
Pull the power cord out in for 4-5 times. If
still rewinds itself, ask for an authorized
servicing department for repair.
No speed
regulation
■ The speed regulation device may be
out of control
Restart the appliance for reuse at several
times, if it is ask for, exactly out of control an
authorized servicing department.
Front cover
t'can be
closed
■ Check if no dust bag is put inside or
the front cover deformd without dust
bag in good position.
Put the dust bag in good position and then
take the appliance to the authorized
servicing department.
Dust full
indicator is
covered by red
indications
■ Check if the floor brush hose or the
long connecting
See if the. tube is blocked dust bag is
full and the air filter is clogged.
Immediately remove obstructions away.
Clean or Clean. replace the dust bag the air
inlet filter.
Possible reason Solution

10
Model No. RC-701M
Rating voltage 220-240V / 50Hz
Power 2200W
TECHNICAL SPECIFICATIONS
SERVICE AFTER SALES
If you find the temperature of the motor too high or any unusual noise occurring and the
malfunctions the consumer can’t solve when using, you should stop operation at once.
Do be sure not to discharge it blindly before asking for an authorized servicing department for
check.