DAGRO L1-NJ User manual

第1页
720P HD Wireless Doorbell Instruction
V1.0
一. Hardware
Electromagnetic Lock configuration instructions：
1.Unlock-COM
2.Unlock-NC
3.Unlock-Button 1
4.Unlock-Button 2
Network cable switch interface configuration instructions：
1.12V_POE- 5.12V_POE+
2.12V_POE- 6.RX+
3.RX- 7.TX-
4.12V_POE+ 8.TX+
二. Download APP

第2页
Please visit：163eye.cc
1.Search "163Eye" in Iphone App Store .And
install, or scan right code, more details
2.Search “163Eye "in android market or Scan
QR code to download and install it
3.APP。Register and Login APP.
三. Network Configuration
Power on the door phone and waits for starting. (It will have the sound tip if the door phone
starts).
1.Open and login the software, using the smart online mode to do the Wifi settings.
3.APP 。Choose way
to login APP.
2.Choose register mode
and finish it as per the
tips. ( Mobile phone
registration is
recommended.
1.Open APP and click
on the new user
registration.

第3页
Tip: Pls ensure the wifi that you set can connect to the mobile phone or iPad normally.
Warning: For security purpose, there is default password 123, which need the user set the device
password for the first time
1.1.Start the APP ,
Click "+"that in the
upper right corner and
2.2.Follow the tips to
operate , when all
finish cilck "Next"
3.Input wifi name &
password , then click
"Next "
4.Open the software. Click on “+”
on the right corner and choose
smart online .
5.After connect toWIFI
Successfully, operate as
the tips to setting the
password , and
click”done” button
6.Once add the device ,the app
would back to device list
automatically , Click the thumbnail
and then you can view the image

第4页
When you use the RJ45 cable connect the doorbell, choose the manual addition, and then you can
finish as per the tips.
四. Visitors calling
五. Security Protection
1.Visitor press the calling
button
2.Popup message from APP,
answer or hang up
After answering, you can call intercom, take photos, open the door etc. Full duplex intercom
call, which is more convenient to use.

第5页
Alarm Settings
Alarm Information Bar details :
Receiving Alarm :was closed by default. If closed, cannot receive messages and alarm push.
Alarm Push Account: Add the first mobile phone by default configuration for bell. Support Max.
five accounts.
Alarm Push Email : Binding mailbox. Bell will send the images to the mailbox, record the visitor
information or alarm information when visitors call or alarm acts.
Motion Detection was closed by default. The bell alarm acts when object moves if the motion
detection is open.
Buzzer was off by default. It will send out the alarm when the buzzer is open.
2.Arming and Disarming
1.Click the device
name and settings on
the pop-up dialog
box.
Click Alarm Settings
3.Check whether the
receiving alarm information
bar is open and whether
there is the machine
account on the alarm push
account bar.

第6页
Disarming : Disarming is default . The lock icon is opened , the mobile phone can not receive
the alarm messages .
Arming: After the arming setting , the lock icon is closed , the mobile phone can receive
the alarm messages
六． Other functions
Device information : Display the current firmware information of the device
Date and Time : Setting device’s time.Default automatically synchronize the network time

第7页
Media Setting : Video Format (NTSC/ PAL) , Volume , Image Reverse
Security Settings : modify admin password of the device
Network Settings : Ethernet / WIFI
Alarm Settings : Setting the alarm details
Recording Setting : Setting the record type (recording way option , before setting , pls insert the
SD card into the card slot )
infrared alarm device, max support 64pcs device (Options )
Storage settings : check the TF/SD card information
Device Update :check the device firmware and update
七．Software Function Introduction
Device configuration：
Playback : Play TF card recording（optional）
Edit：Edit device name and password
Device：Display the device list
Message：Record the visitor and alarm message
Image：Record the screenshot
Account information：Check and configuration information about current account, modify
the account password
System setting：Configuration alarm and calls ring，software automatically start and hang
up icon configuration
Scan QR code to add device：According to software reminder，Can be used to scan the
QR code to configured the doorbell WIFI network.
Alarm management：Configure alarm interval and alarm shielding device

第8页
八.other function Instruction
1.Full Duplex voice intercom, So easy
2.Support onvif function
3.Support CMS client . Pls download it from this link : http://163eye.com
九.Parameters
Parameters
Master
Chip
GM8135S
Resolution
1280*720 HD(1280*720) 1Megapixel
Video
Full Duplex voice intercom , support two-
way audio
Alarm Detection
Motion Detection
View Angle
110°super wide angle
Protocols
ONVIF ,TCP/IP,UDP,SMTP,DHCP,UPnP,P2P
十．F AQ
Can not hear the sound “di,di, di ....”from the doorbell ?
A:Press the reset botton about 10 seconds to come back to factory default
Q：Why the smart phone just shake and could not hear the bell when received the visitor
calling ?
A：Start the APP , on the lower right corner of the device , , click’’ more ......”button →system
setting →trick the ”Incoming Ring ” and “ Alarm Ring ”
2.Q：Can not received the call and alarm massage ?
A：Pls check if you have the Alarm push ID in Alarm Setting
3.Q：How to delete others alarm ID ?
A：Alarm setting →Alarm push ID→Delete the ID

第9页