Dahua VTO5110B User manual

Villa Door Station User’s Manual
For VTO5000 Series
V1.0.0

1
Table of Contents
1Product Appearance.................................................................................... 2
1.1 Front Panel ..................................................................................................... 2
1.2 Port................................................................................................................. 4
2Installation Guide......................................................................................... 0
3Basic Function Introduction.......................................................................... 0
3.1 Call User......................................................................................................... 0
3.1.1 Connect ................................................................................................ 0
3.1.2 Call ....................................................................................................... 0
3.2 Monitor............................................................................................................ 0
3.3 Issue Card/Delete Card................................................................................... 0
3.3.1 Issue Card ............................................................................................ 0
3.3.2 Delete Card........................................................................................... 0
3.4 Unlock............................................................................................................. 1
3.4.1 Unlock Interval...................................................................................... 1
3.4.2 Unlock under Connecting Status........................................................... 1
3.4.3 2.4.2 Unlock under Calling Status......................................................... 1
3.4.4 2.4.3 Unlock under Monitoring Status ................................................... 1
3.4.5 2.4.4 Unlock via IC Card....................................................................... 1
3.5 2.5 Compensation of Light .............................................................................. 1
3.6 2.6 Vandal Proof ............................................................................................. 1
3.7 2.7 Door Unlocked Overtime Alarm................................................................. 2
4FAQ............................................................................................................. 0
Appendix 1 Technical Specifications......................................................................... 0

2
1 Product Appearance
1.1 Front Panel
The product appearances of VTO5110B and VTO5110BW are shown in Figure 1- 1
VTO5110B and Figure 1- 2 VTO5110BW.
Figure 1- 1 VTO5110B

3
Figure 1- 2 VTO5110BW
No.
Name
Function
1
Compensation
LED compensation will automatically
turn on during monitoring, connecting,
call and alarm statuses if there is no
enough light in environment.
2
Camera
It monitors corresponding door area.
3
Card Reading Area
You can swipe card in this area.
4
Touch Button
You can touch this button to call multiple
VTHs at the same time.
The product appearance of VTO5x00Cx series is shown in Figure 1- 3 VTO5x00Cx
Series.

4
Figure 1- 3 VTO5x00Cx Series
No.
Name
Function
1
Compensation
LED compensation will automatically
turn on during monitoring, connecting,
call and alarm statuses if there is no
enough light in environment.
2
Camera
It monitors corresponding door area.
3
Touch Button
You can touch this button to call multiple
VTHs at the same time.
1.2 Port
Port of VTO5110B/BW is shown in Figure 1- 4. Port of VTO5x00Cx series is shown in
Figure 1- 5 VTO5x00Cx Series.

5
Figure 1- 4 VTO5110B/BW
No.
Port Name
Function
1
Network port
Connect to analog VTH.
2
Network port
Connect to analog VTH.
3
Power port
Connect to 24V DC power
4
Lock port
Connect to lock, unlock button

6
Figure 1- 5 VTO5x00Cx Series
No.
Port Name
Function
1
Network port 1
Connect to analog VTH.
2
Network port 2
Connect to analog VTH.
3
Power port
Connect to 24V DC power
4
Debugging port
For installation staff use
5
Green port 1
Connect to lock
6
Green port 2
Connect to door sensor and unlock button.

2 Installation Guide
Installation guide of VTO is illustrated in Figure 2- 1 VTO5110B/BW.
Figure 2- 1 VTO5110B/BW
Installation step:
1. Fix installation holder onto wall:
a) Use the M4 screw accompanied with the VTO to fix holder onto the 86 box
(as b in Figure 2- 1 VTO5110B/BW);
b) In order to firm the VTO, use the ST3.0 screw accompanied with VTO to fix
the 86 box onto wall after locking the 86 box. (as c in Figure 2- 1
VTO5110B/BW);
2. Install 1 in Figure 2- 1 VTO5110B/BW onto the holder. Fasten edge and lightly push
its bottom edge.
3. After you complete the installation between VTO and holder, use the set screw
accompanied as a in Figure 2- 1 VTO5110B/BWto fix the VTO and its holder.

1
Figure 2- 2 VTO5x00Cx Series
Installation step:
1. Fix installation holder onto wall:
Use the M4 screw accompanied with the VTO to fix holder onto the 86 box (as 3
in Figure 2- 2 VTO5x00Cx Series);
2. B in Figure 2- 2 VTO5x00Cx Series is to strengthen firmness of VTO, use the ST3.0
screw accompanied with VTO to fix the 86 box onto wall after locking the 86 box.
(as c in Figure 2- 2 VTO5x00Cx Series);
3. Install decoration cover (as 1 in Figure 2- 2 VTO5x00Cx Series) onto 2, secure with
screw a.
Screw Illustration
No.
Name
Symbol
a
M3×8 cross recessed countersunk
head horizontal screw - galvanized
black
b
M4×30 cross recess head horizontal
screw
c
ST3×18 cross recess top
screw-nickel silver
d
Expansion pipe ￠6*30mm white

3 Basic Function Introduction
3.1 Call User
3.1.1Connect
VTO is connected to VTH via network connection. At VTO, You can touch the button
to call all VTHs of designated user. During connecting, you can touch the button on VTO
to end call at any time.
3.1.2Call
Under connecting status, if the call is picked up by any VTH, other VTHs will enter
standby status (These VTHs may join call by pressing call button, or enter monitoring
status by pressing monitor button.), and you will enter calling status. Each VTH that joins
the call may end call independently from other VTHs.
3.2 Monitor
Video captured by this VTO can be viewed from multiple VTHs.
3.3 Issue Card/Delete Card
3.3.1Issue Card
Press menu button on VTH to issue card. Press SOS button to switch menu and
select to issue card. VTH will then enter issuing card mode, and you will see prompt
saying issuing card on screen. Now swipe card at card reading area until you hear a beep
which means you have successfully issued card. Press touch button on VTO to exit.
3.3.2Delete Card
Press menu button on VTH to enter deleting menu. Press SOS button to switch menu
and select to delete card. You shall confirm deletion by pressing call button. After deletion
completes, you will see prompt saying delete card successfully.

1
3.4 Unlock
3.4.1Unlock Interval
In VTH menu, set unlock interval, max 25s.
3.4.2Unlock under Connecting Status
Under connecting status, VTH can remotely unlock door. VTO will return to standby
interface after call ends or countdown stops.
3.4.32.4.2 Unlock under Calling Status
Under calling status, VTH can remotely unlock door. VTO will return to standby
interface after call ends or countdown stops.
3.4.42.4.3 Unlock under Monitoring Status
Under monitoring status, VTH can remotely unlock door. VTO will return to standby
interface after call ends or countdown stops.
3.4.52.4.4 Unlock via IC Card
By swiping authorized IC card, you can unlock door after local verification.
Note: For Model C product, only VTO5100C has unlocking function via swiping card.
3.5 2.5 Compensation of Light
In dark environment or at night, the VTO adopts auto photoreception technology
which achieves LED compensation in monitoring, connecting, call and alarm statuses.
3.6 2.6 Vandal Proof
There is one channel of vandal proof which will generate alarm sound and the alarm
plus video will be reported to VTH once VTO is forced to leave the wall.

2
3.7 2.7 Door Unlocked Overtime Alarm
When door has been opened for more than 120s, VTO will generate alarm and
meanwhile the alarm plus video will be reported to VTH.

4 FAQ
1. Q: How do I know if the power supply to VTO is working normally?
A: For VTO5110B and VTO5110BW, when you plug the device to power supply, wait
about 1s and press the touch button to turn on back light. For VTO5000C and
VTO5000CM, when you plug the device to power supply, wait about 1s, you shall see
blue indicators around touch button turn on.
2. Q: You pressed the touch button, and the indicator turned on, but the VTO did not
start a call?
A: Please check your operation process.
3. Q: How to end a call when I am calling?
A: You can end a call by touching the button on VTO lightly.
4. Q: The device could not boot up and there was no sound or light.
A: Please check if power supply is well plugged.
5. Q: VTO did not respond after I swiped IC card. (VTO5110B, VTO5110BW and
VTO5100C have function of swiping card.)
A: Please check if your card is IC card.
6. Q: I have other problems not included above.
A: Please contact technical staffs for assistance.

Appendix 1 Technical Specifications
Model
VTO5110B/ VTO5110BW
Video
Type
Color
Resolution
600 line
Night vision
Support
Audio
Input
Omnidirectional microphone
Output
Built-in speaker
Bidirectional talk
Support
Operation Mode
Input
Single-button input (with back light)
Swipe card
Built-in IC card sensor
Alarm
Vandal proof
Support
General
Power
DC 24V
Power
consumption
Standby≤1W ；working≤4W
Environment
-20℃~60℃
Dimensions
115mm*45mm*155mm (L*W*H)
Model
VTO5000C/ VTO5000CM
Video
Type
Color
Resolution
600 line
Night vision
Support
Audio
Input
Omnidirectional microphone
Output
Built-in speaker
Bidirectional talk
Support
Operation Mode
Input
Single-button input (with back light)
Alarm
Vandal proof
Support
General

1
Power
DC 24V
Power
consumption
Standby≤1W ；working≤4W
Environment
-30℃~60℃
Dimensions
141*100*17mm (L*W*H)
Note:
This manual is for reference only. Slight difference may be found in user
interface.
All the designs and software here are subject to change without prior written
notice.
All trademarks and registered trademarks are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of
us.
Please visit our website or contact your local service engineer for more
information.
