Dahua ASI1212D User manual

1
Fingerprint Access Standalone
User’s Manual
V1.1.2

i
Foreword
General
This manual introduces the functions and operations of the Fingerprint Access Standalone
(hereinafter referred to as "the Device").
Safety Instructions
The following signal words might appear in the manual.
Signal Words Meaning
DANGER
Indicates a high potential hazard which, if not avoided, will result in
death or serious injury.
WARNING
Indicates a medium or low potential hazard which, if not avoided,
could result in slight or moderate injury.
CAUTION
Indicates a potential risk which, if not avoided, could result in
property damage, data loss, reductions in performance, or
unpredictable results.
TIPS Provides methods to help you solve a problem or save time.
NOTE Provides additional information as a supplement to the text.
Revision History
Version Revision Content Release Time
V1.1.2 Updated screens. September 2021
Privacy Protection Notice
As the Device user or data controller, you might collect the personal data of others such as their face,
fingerprints, and license plate number. You need to be in compliance with your local privacy
protection laws and regulations to protect the legitimate rights and interests of other people by
implementing measures which include but are not limited: Providing clear and visible identification
to inform people of the existence of the surveillance area and provide required contact information.
About the Manual
The manual is for reference only. Slight differences might be found between the manual and the
product.
We are not liable for losses incurred due to operating the product in ways that are not in
compliance with the manual.

ii
The manual will be updated according to the latest laws and regulations of related jurisdictions.
For detailed information, see the paper user's manual, use our CD-ROM, scan the QR code or
visit our official website. The manual is for reference only. Slight differences might be found
between the electronic version and the paper version.
All designs and software are subject to change without prior written notice. Product updates
might result in some differences appearing between the actual product and the manual. Please
contact customer service for the latest program and supplementary documentation.
There might be errors in the print or deviations in the description of the functions, operations
and technical data. If there is any doubt or dispute, we reserve the right of final explanation.
Upgrade the reader software or try other mainstream reader software if the manual (in PDF
format) cannot be opened.
All trademarks, registered trademarks and company names in the manual are properties of their
respective owners.
Please visit our website, contact the supplier or customer service if any problems occur while
using the Device.
If there is any uncertainty or controversy, we reserve the right of final explanation.

iii
Important Safeguards and Warnings
This section introduces content covering the proper handling of the Device, hazard prevention, and
prevention of property damage. Read carefully before using the Device, comply with the guidelines
when using it, and keep the manual safe for future reference.
Transportation Requirements
Transport, use and store the Device under allowed humidity and temperature conditions.
Storage Requirements
Store the Device under allowed humidity and temperature conditions.
Installation Requirements
WARNING
Connect the Device to the adapter before power on.
Strictly abide by local electrical safety standards, and make sure that the voltage in the area is
steady and conforms to the power requirements of the Device.
Do not connect the Device to more than one power supply. Otherwise, the Device might
become damaged.
Observe all safety procedures and wear required protective equipment provided for your use
while working at heights.
Do not expose the Device to direct sunlight or heat sources.
Do not install the Device in humid, dusty or smoky places.
Install the Device in a well-ventilated place, and do not block the ventilator of the Device.
Use the power adapter or case power supply provided by the Device manufacturer.
The power supply must conform to the requirements of ES1 in IEC 62368-1 standard and be no
higher than PS2. Note that the power supply requirements are subject to the Device label.
Connect class I electrical appliances to a power socket with protective earthing.
The device must be installed on solid and flat surface in order to guarantee safety under load
and earthquake. Otherwise, it may cause Device to fall off or turnover.
Operation Requirements
Make sure that the power supply of the Device works properly before use.

iv
Do not pull out the power cable of the Device while it is powered on.
Only use the Device within the rated power range.
Use the Device under allowed humidity and temperature conditions.
Prevent liquids from splashing or dripping on the Device. Make sure that there are no objects
filled with liquid on top of the Device to avoid liquids flowing into it.
Do not disassemble the Device.
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
If you use power plug or appliance coupler as disconnecting device, please maintain the
disconnecting device available to be operated all the time.

v
Table of Contents
Foreword............................................................................................................................................................ i
Important Safeguards and Warnings............................................................................................................. iii
1 Overview........................................................................................................................................................ 1
2 Structure and Installation............................................................................................................................. 2
Structure and Dimensions......................................................................................................................................................22.1
Installation....................................................................................................................................................................................42.2
3 System Structure ........................................................................................................................................... 6
4 Function Settings .......................................................................................................................................... 7
Login ...............................................................................................................................................................................................74.1
User Management.....................................................................................................................................................................74.2
4.2.1 Adding Users ..................................................................................................................................................................7
4.2.2 Adding Public Password.............................................................................................................................................8
4.2.3 Deleting Users................................................................................................................................................................9
4.2.4 Deleting Password......................................................................................................................................................10
4.2.5 Adding Main Cards.....................................................................................................................................................10
Configuring Access Control..................................................................................................................................................114.3
4.3.1 Setting Period...............................................................................................................................................................11
4.3.2 Setting Main Card.......................................................................................................................................................13
4.3.3 Setting Unlock Mode.................................................................................................................................................14
4.3.4 Setting Door Lock Time ............................................................................................................................................14
4.3.5 Setting Alarms..............................................................................................................................................................15
4.3.6 Setting Door Status....................................................................................................................................................16
System Settings ........................................................................................................................................................................164.4
4.4.1 Local Setup....................................................................................................................................................................16
4.4.2 Configuring Network.................................................................................................................................................18
4.4.3 Setting Device Mode.................................................................................................................................................19
4.4.4 Restarting Device........................................................................................................................................................20
4.4.5 Updating System.........................................................................................................................................................20
System Information.................................................................................................................................................................204.5
4.5.1 Viewing Unlock Records...........................................................................................................................................20
4.5.2 Viewing Alarm Records.............................................................................................................................................21
4.5.3 Viewing Device Information ...................................................................................................................................22
4.5.4 Exporting/Importing.................................................................................................................................................23
Cybersecurity Recommendations ............................................................................................. 24Appendix 1

1
1Overview
The Fingerprint Access Standalone integrates card reading, configurations, and other functions. It
can be applied in many scenarios, such as commercial building, corporation and intelligent
community.
Main Features
Touch keyboard + LCD display, TCP/IP protocol.
Supports unlock through card, fingerprint, password and their combinations.
Supports a maximum of 3,000 fingerprints (by default) and up to 4,500 fingerprints
(customized), 30,000 valid cards and 500 public passwords.
Supports a maximum of 150,000 card records and 1024 alarm records.
Supports door timeout alarm, intrusion alarm, duress alarm, and door sensor alarm.
Supports doorbell input.
Supports guest card, duress card, blocklist/allowlist and patrol card, while support period of
validity or times.
Supports card reader and single-door controller.
Supports 128 groups of period and 128 groups of holiday period.
If this product requires external power, please use 12 VDC 0.5 A adapter and the operating
temperature must be within -5 °C to 55 °C.

2
2Structure and Installation
Structure and Dimensions2.1
Front viewFigure 2-1

3
Side viewFigure 2-2

4
Installation2.2
Wires of the DeviceFigure 2-3
Table 2-1 Description of ports
Port Color Interface Note Protocol
CON1
Red +12VI 12 VDC power input
—
Black GND GND
Blue COM Lock COM
White NC Lock NC
Green NO Lock NO
Brown SR Door sensor
Yellow GND GND
Purple PUSH Unlock button
CON2
Red +12VO 12 VDC power output —
Black GND GND —
Blue CASE Card reader
Weigand
protocol
White D1 Weigand line 1
Green D0 Weigand line 0
Brown LED Weigand card indicator line
Yellow B1 RS485B RS485 protol
Purple A1 RS485A

5
Port Color Interface Note Protocol
CON3
Red BELL+ Ring
—
Black BELL-
Blue GND GND
White AOUT Alarm output
Green AIN Alarm input
Brown GND GND
Yellow B2 External RS485B RS485 protcol
Purple A2 External RS485A
CON4 —RJ45 Network —
Installation Procedure
Fasten the bracket on installation surface with three ST3×18 self-tapping screws.Step 1
Connect the wires, thread the wires through the slots of the bracket, and place wires into theStep 2
installation surface.
According to the direction of arrow, secure the Device to the bracket.Step 3
Installation of the DeviceFigure 2-4
From the bottom up, and fasten the bracket with a M3×6 screw.Step 4

6
3System Structure
System structureFigure 3-1

7
4Function Settings
Login4.1
Start the Device and Tap OK.Step 1
Enter the admin password, and tap OK to enter the Main Menu.Step 2
Default password is "88888888". Please change admin password.
Tap ↑button to move up.
Tap ↓button to move down.
Tap OK to enter or confirm.
Tap to return or exit.
Tap to backspace.
Tap to ring. Main menuFigure 4-1
User Management4.2
You can add or delete users.
4.2.1 Adding Users
Add users to associate the card No. with their fingerprints.
On the main page, select Right >OK.Step 1
Tap Add User >OK.Step 2

8
Add userFigure 4-2
Use the keypad to enter card number or place the card on the swiping area.Step 3
Select a card type.Step 4
Table 4-1 Card types
Card Type Description
Normal People can access the door within configured time and valid period.
VIP card Service personnel receive notifications when the VIP cardholder enters.
Guest card Guests can unlock the door for limited times. When the unlocking times
runs out, they cannot unlock the door.
Patrol card
Patrol users will have their attendance tracked, but they have no
unlocking permissions.
Block list When users in the blocklist unlock the door, service personnel will receive
a notification.
Duress card Duress card becomes valid after you set duress alarm. You can swipe this
card to unlock, but an alarm will be send to the center.
Configure other user parameters.Step 5
Tap OK and the system prompts whether to enroll the fingerprint.Step 6
Select YES and follow the instructions to enroll the fingerprint.
Select NO to complete adding.
4.2.2 Adding Public Password
Unlock the door by only entering the public password.
Before use the public password to unlock the door, set the unlock mode to unlocking by password,
or unlocking by card or password or fingerprint.
On the Right screen, select Add Public Password, and then tap OK.Step 1

9
Public passwordFigure 4-3
Enter public password no. and tap ↓.Step 2
Enter public password and confirmation password.Step 3
Tap OK.Step 4
4.2.3 Deleting Users
You can delete a single user or all users.
4.2.3.1 Deleting Single User
On the Right screen, select Delete User and tap OK.Step 1
Select Delete Single User and tap OK.Step 2
Delete userFigure 4-4
Delete user.Step 3
Enter card number you want to delete and tap OK.
Scan card you want to delete on card swiping area, and then tap OK.
Enter user number you want to delete, and then tap OK.
Select OK and tap OK.Step 4

10
4.2.3.2 Deleting All Users
On delete user screen, select all users, and tap OK.Step 1
Select OK and tap OK.Step 2
4.2.4 Deleting Password
You can delete a single public password or delete all public passwords.
4.2.4.1 Deleting Single Public Password
On the Delete User screen, select Delete Public Password, and tap OK.Step 1
Select Delete Single Public Password and tap OK.Step 2
Delete public passwordFigure 4-5
Enter number of public password and tap OK.Step 3
Select OK and tap OK.Step 4
4.2.4.2 Deleting All Public Passwords
On Delete Public Password screen, select Delete all public passwords, and tap OK.Step 1
Select OK and tap OK.Step 2
4.2.5 Adding Main Cards
You can quickly add card users through main card. Before adding card users, you must add one main
card first.
On the Right screen, select add more main card, and tap OK.Step 1
Place main card on swiping area and scan.Step 2
Place the added card at the swiping area to scan.Step 3

11
Configuring Access Control4.3
4.3.1 Setting Period
You can set unlock period, including card swiping period, holiday period, mode period and NO
period.
4.3.1.1 Setting Card Swiping Period
Card swiping period can be 0–127, a total of 128 periods. In each period, you need to set schedules
for a week. When a new card is added, and set card swiping period, then user swipe card to unlock.
Access control will judge if current time is within set period.
Table 4-2 Card swiping period
Day Period
Monday 0800-2200 (valid period: 08:00 to 22:00)
Tuesday 0800-2200 (valid period: 08:00 to 22:00)
Wednesday 0800-2200 (valid period: 08:00 to 22:00)
Thursday 0800-2200 (valid period: 08:00 to 22:00)
Friday 0800-2200 (valid period: 08:00 to 22:00)
Saturday 0800-2200 (valid period: 08:00 to 22:00)
Sunday 0800-2200 (valid period: 08:00 to 22:00)
On the main menu, select Access, and tap OK.Step 1
Select time period, and tap OK.Step 2
Select card swiping period, and tap OK.Step 3
Card swiping period (1)Figure 4-6
Enter time period, and tap OK. Enter any number between 0–127.Step 4

12
Card swiping period (2)Figure 4-7
Select a day to set periods, and tap OK.Step 5
Set periods for the rest of the week.Step 6
Tap OK.Step 7
Select YES, and tap OK.Step 8
4.3.1.2 Setting Holiday Period
You can set up to 128 holiday periods (from 0 through 127).
On the time period setup screen, select holiday period, and then tap OK.Step 1
Enter period number (0–127).Step 2
Enter the holiday start time, holiday end time and period, and then tap OK.Step 3
Period is the period number you set on card period screen.
Holiday periodFigure 4-8
Select YES, and tap OK.Step 4
4.3.1.3 Setting Mode Period
Mode period has four periods per day from Monday to Sunday.
On time period setup screen, select mode period, and tap OK.Step 1

13
Mode periodFigure 4-9
Select Monday, and tap OK.Step 2
Configure period, tap OK to select unlock mode of the period.Step 3
Configure periods from Tuesday through Sunday.Step 4
Tap OK.Step 5
Select YES, and tap OK.Step 6
After completion, the unlock methods are managed according to the four periods.
4.3.1.4 Setting NO Period
After you set the NO period, the door will remains unlocked during this period.
On the time setup screen, select NO Period, and tap OK.Step 1
NO periodFigure 4-10
Period number is the number you set on the card swiping period screen.
Tap to delete old data, enter period number, and then tap OK.Step 2
4.3.2 Setting Main Card
You can modify or add main card.
On the Access screen, select main card setup, and tap OK.Step 1

14
Main card setupFigure 4-11
Tap to delete old card number, and enter new card number, or place the card on theStep 2
swiping area for scanning, and then tap OK.
4.3.3 Setting Unlock Mode
Unlock modes includes card, password, fingerprint, card and password, card and fingerprint, card or
password or fingerprint.
On the Access screen, select unlock mode, and then tap OK.Step 1
Unlock mode setupFigure 4-12
Select the unlock mode and tap OK.Step 2
4.3.4 Setting Door Lock Time
Door lock time includes lock hold time and over time.
Hold Time: After you swipe card, the door remains unlocked for a defined hold time before it
close again.
Over Time: If the door remains unlocked after the defined over time after you swipe card, an
alarm is triggered.
On the Access screen, select door lock time setup and tap OK.Step 1