Dahua DHI-ASR1201D User manual

1
Slim Water-proof RFID Reader User’s Manual
V1.0.0

Table of Contents
1 Overview............................................................................................................................... 1
2 Device Structure.................................................................................................................. 2
2.1 Appearance.......................................................................................................................... 2
2.2 Dimension............................................................................................................................ 4
3 Device Installation............................................................................................................... 7
4 System Framework............................................................................................................. 9

Important Safeguards and Warnings
Note:
Do not expose the device to lampblack, steam or dust. Otherwise it may cause
fire or electric shock.
Do not install the device at position exposed to sunlight or in high temperature.
Temperature rise in device may cause fire.
Do not expose the device to humid environment. Otherwise it may cause fire.
The device must be installed on solid and flat surface in order to guarantee
safety under load and earthquake. Otherwise, it may cause device to fall off or
turnover.
Do not place the device on carpet or quilt.
Do not block air vent of the device or ventilation around the device. Otherwise,
temperature in device will rise and may cause fire.
Do not place any object on the device.
Do not disassemble the device without professional instruction.
Warning:
Please use battery properly to avoid fire, explosion and other dangers.
Please replace used battery with battery of the same type.
Do not use power line other than the one specified. Please use it properly.
Otherwise, it may cause fire or electric shock.
Special Announcement
This manual is for reference only.
All the designs and software here are subject to change without prior written
notice.
All trademarks and registered trademarks are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of
us.
Please visit our website for more information.

1
1 Overview
The Slim Water-proof RFID Reader is a reader and also a complement to video
monitoring and visual talk. Its appearance is neat and fashionable, and its function is
enhanced. It is designed for commercial building, corporation property and intelligent
community.
It has:
Non-contact reader has two frequency 13.56 MHz/125KHz optional;
Card only, or card+password two model optional;
Standard Wiegand output or RS485 output.
Card reading distance 3cm~8cm, corresponding card swiping time <0.1s.
Watch dog.
Lighting-proof, static-free and short circuit-proof.
Beeper and indicator.

2
2 Device Structure
2.1 Appearance
The device appearance is shown in Figure 2- 1 and Figure 2- 2.

3
The corresponding ports of the external port are listed in Chart 2- 1.
Color of Wire
Wiring Port
Note
Red
12V power
Reader power
Black
GND
Blue
CASE
Tamper alarm
White
D1
Wiegand output
Green
D0
Brown
LED
Yellow
RS485-
RS485 reader
Purple
RS485+

4
2.2 Dimension
Reader’s dimension is shown in Figure 2- 3, Figure 2- 4, and Figure 2- 5 and. Unit is mm.

5

6

7
3 Device Installation
Reader installation illustration is shown in Figure 3- 1 and Figure 3-2.

8
Installation steps:
Step 1. Install magnet at the position you want to in fix installation bracket.
Step 2. Fix installation bracket on wall with ST3*18 self tapping screw.
Step 3. Pull 8-pin wire of the device through bracket as shown in figure above.
Step 4. Hang the device on bracket, pull 8-pin wire straight, and fix bottom with M3*6
screw.

9
4 System Framework
Slim Water-proof RFID reader and access control host, alarm device, master PC and etc.
are connected as in Figure 4- 1.
Note:
This manual is for reference only. Slight difference may be found in user
interface.
All the designs and software here are subject to change without prior written
notice.
All trademarks and registered trademarks are the properties of their respective
owners.
If there is any uncertainty or controversy, please refer to the final explanation of
us.
Please visit our website or contact your local service engineer for more
information.