Dahua DH-PFWB2-60n User manual

How to reset Dahua V-Radio Wireless Bridge using
Reset Tool
Suitable for:
DH-PFWB2-60n
DH-PFWB2-30n
DH-PFWB2-90n
DH-PFWB5-30n
DH-PFWB5-10n
DH-PFWB5-90n
DH-PFWB5-30ac
DH-PFWB5-10ac
DH-PFWB5-90ac
User Guide
1) Hardware Connection
Connect the wireless bridge and one computer as below.
Figure 1-1 Hardware connection
2) JRE Installation
JRE must be installed in the computer to use Reset Tool. You can find “jre-8u171-windows-i586.exe”
in the zip file.
3) Open Reset Tool
Open Reset Tool in the computer, Status will shows “Ready” as below.

Figure 3-1
4) Reboot Wireless Bridge
Keep Reset Tool open in the computer and reboot the wireless bridge (power off/on). The Reset
Tool will scan wireless bridge automatically.
Figure 4-1
5) Enter S/N to reset Wireless Bridge
Click “Reset”Button and enter last 4 numbers of S/N (serial number). Click “Enter” to reset the
device.
Note: You must finish all the operations within 60s or you have to start from Step 4 again.

Figure 5-1
Figure 5-2
6) Reset Successfully
After operations above, the wireless bridge will be reset to factory default settings.
Default IP: 192.168.1.36
User Name: admin
Password: admin

Figure 6-1