Daikin RYN-E3V1B User manual

• Outdoor Units • R-410A • RYN-E3V1B
1
1
• Split Sky Air • Outdoor Units
1
1 Features
OutdoorUni SplitSky
A
RYN-E3V1B R-410a • Outdoor units for pair application
• Daikin outdoor units are neat and sturdy and can be mounted easily
on a roof or terrace or simply placed against an outside wall.
• Outdoor units are fitted with a swing compressor, renowned for its low
noise and high energy efficiency

3
1
2
• Split Sky Air • Outdoor Units 2
• Outdoor Units • R-410A • RYN-E3V1B
2 Specifications
2-1 NOMINAL CAPACITY AND
NOMINAL INPUT RYN50E3V1B RYN60E3V1B
For
combination
indoor units +
outdoor units
Indoor Units FTYN50EV1B FTYN60EV1B
Cooling
capacity
Standard kW 5.0 6.0
Heating
capacity
Standard kW 5.8 7.0
Nominal input Cooling Standard kW 1.55 1.99
Heating Standard kW 1.60 2.04
For
combination
indoor units +
outdoor units
EER Nominal 3.23 3.02
COP Nominal 3.63 3.43
Energy
Labeling
Directive
Cooling A B
Heating A B
Annual energy consumption kWh 775 995
Indoor Units FTYN50FV1B FTYN60FV1B
Cooling
capacity
Standard kW 5.0 6.0
Heating
capacity
Standard kW 5.8 7.0
Nominal input Cooling Standard kW 1.55 1.99
Heating Standard kW 1.60 2.04
For
combination
indoor units +
outdoor units
EER Nominal 3.23 3.02
COP Nominal 3.63 3.43
Energy
Labeling
Directive
Cooling A B
Heating A B
Annual energy consumption kWh 775 995
2-2 TECHNICAL SPECIFICATIONS RYN50E3V1B RYN60E3V1B
Casing Colour Ivory White
Dimensions Unit Height mm 735 735
Width mm 825 825
Depth mm 300 300
Packing Height mm 797 797
Width mm 960 960
Depth mm 390 390
Weight Unit kg 48 48
Packed Unit kg 53 53
Heat
Exchanger
Dimensions Length mm 845 845
Nr of Rows 2 2
Fin Pitch mm 1.80 1.80
Nr of Stages 32 32
Tube type Hi-Xa(8)
Fin Type Waffle fin
Treatment Anti-corrosion treatment (PE)
Fan Type Propeller
Quantity 1 1
Air Flow Rate
(nominal at
230V)
Cooling m³/min 48.9 50.9
Heating m³/min 45.0 46.3
Motor Quantity 1 1
Model KFD-380-50-8A
Motor Speed
(nominal)
Cooling rpm 780 810
Heating rpm 720 740
Fan Motor Output W 53 53

• Outdoor Units • R-410A • RYN-E3V1B
1
2
• Split Sky Air • Outdoor Units
3
2 Specifications
Compressor Quantity 1 1
Motor Model 2YC36BXD#A
Type Hermetically sealed swing compressor
Motor
Output
W 1100 1100
Operation
Range
Cooling Min °CDB -10.0 -10.0
Max °CDB 46.0 46.0
Heating Min °CWB -15 -15
Max °CWB 18 18
Sound Level
(nominal)
Cooling Sound
Power
dBA 61.0 63.0
Sound
Pressure
dBA 47.0 49.0
Heating Sound
Pressure
dBA 48.0 49.0
Refrigerant Type R-410A
Charge kg 1.5 1.5
Refrigerant Oil Type FVC50K
Charged Volume l 0.65 065
Piping
connections
Liquid (OD) Diameter
(OD)
mm 6.35 6.35
Gas Diameter
(OD)
mm 12.7 12.7
Drain Diameter
(OD)
mm 18 18
Piping Length Maximum m 30 30
Additional Refrigerant
Charge
kg/m 0.02/>10m
Max. internunit level
difference
m 20.0 20.0
Heat Insulation Both liquid and gas pipes
Standard
Accessories
Item Drain plug
Quantity 1 1
Item Installation manual
Quantity 1 1
Notes Nominal cooling capacities are based on : indoor temperature : 270CDB, 190CWB, outdoor temperature : 350CDB,
equivalent refrigerant piping : 7.5m, level difference : 0m.
Nominal heating capacities are based on : indoor temperature : 200CDB, outdoor temperature : 70CDB, 60CWB,
equivalent refrigerant piping : 7.5m, level difference : 0m
Sound levels are measured in an anechoic room
Sound pressure level is a relative value, depending on the distance and acoustic environment. For more details,
please refer to sound level drawings of this chapter.
The sound power level is an absolute value indicating the power which a sound source generates.
2-3 ELECTRICAL SPECIFICATIONS RYN50E3V1B RYN60E3V1B
Power Supply Name V1
Phase 1 1
Frequency Hz 50 50
Voltage V 220-240
Voltage range Minimum V -10%
Maximum V +10%
Current Nominal
running current
(RLA)
Cooling
(A)
A 6.75 8.62
Heating
(A)
A 6.94 8.80
Starting current (cooling/
heating)
A 7.1 9.0
Z-max List No requirements
2-2 TECHNICAL SPECIFICATIONS RYN50E3V1B RYN60E3V1B

3
1
2
• Split Sky Air • Outdoor Units 4
• Outdoor Units • R-410A • RYN-E3V1B
2 Specifications
Wiring
connections
For Power
Supply
Quantity 3 3
For connection
with indoor
Quantity 4 4
Remark Including earth wiring
Power Supply Intake Outdoor unit only
2-3 ELECTRICAL SPECIFICATIONS RYN50E3V1B RYN60E3V1B

• Outdoor Units • R-410A • RYN-E3V1B
1
3
• Split Sky Air • Outdoor Units
5
3 Features

3
1
4
• Split Sky Air • Outdoor Units 6
• Outdoor Units • R-410A • RYN-E3V1B
4 Capacity tables
4 - 1 Cooling/Heating capacity tables
FTYN50F+RYN50E
Cooling 50Hz 220-240V
AFR 14.7
BF 0.28
Indoor Outdoor temperature (°CDB)
EWB EDB 20 25 30 32 35 40
(°C) (°C) TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
Heating 50Hz 220-240V AFR 16.1
Indoor Outdoor temperature (°CWB)
EDB -10 -5 0 6 10
(°C) TC PI TC PI TC PI TC PI TC PI
3D051923A
SYMBOLS
AFR: Air flow rate (m
3
/min)
BF: Bypass factor
EWB: Entering wet bulb temp. (°C)
EDB: Entering dry bulb temp. (°C)
TC: Total capacity (kW)
SHC: Sensible heating capacity (kW)
PI: Power input (kW)
NOTES
1 Ratings shown are net capacities which include a deduction for
indoor fan motor heat
2 shows nominal (rated) capacities and power input.
3 TC, PI and SHC must be calculated by interpolation using the figures
in the above tables. (Figures out of the tables should not be used for
calculation.)
4 About SHC which are not mentioned on the table, please calculate
them with around values in direct proportion.
5 Capacities are based on following conditions:
Corresponding refrigerant piping length: 7.5 m
Level difference: 0 m
6 Air flow rate (AFR) and Bypass factor (BF) are taburated above.

• Outdoor Units • R-410A • RYN-E3V1B
1
4
• Split Sky Air • Outdoor Units
7
4 Capacity tables
4 - 1 Cooling/Heating capacity tables
FTYN50FV1B+RYN50E3V1B
Cooling 50Hz 220-240V
AFR 14.7
BF 0.28
Indoor Outdoor temperature (°CDB)
EWB EDB 20 25 30 32 35 40
(°C) (°C) TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
Heating 50Hz 220-240V AFR 16.1
Indoor Outdoor temperature (°CWB)
EDB -10 -5 0 6 10
(°C) TC PI TC PI TC PI TC PI TC PI
3D051923A
SYMBOLS
AFR: Air flow rate (m
3
/min)
BF: Bypass factor
EWB: Entering wet bulb temp. (°C)
EDB: Entering dry bulb temp. (°C)
TC: Total capacity (kW)
SHC: Sensible heating capacity (kW)
PI: Power input (kW)
NOTES
1 Ratings shown are net capacities which include a deduction for
indoor fan motor heat
2 shows nominal (rated) capacities and power input.
3 TC, PI and SHC must be calculated by interpolation using the figures
in the above tables. (Figures out of the tables should not be used for
calculation.)
4 About SHC which are not mentioned on the table, please calculate
them with around values in direct proportion.
5 Capacities are based on following conditions:
Corresponding refrigerant piping length: 7.5 m
Level difference: 0 m
6 Air flow rate (AFR) and Bypass factor (BF) are taburated above.

3
1
4
• Split Sky Air • Outdoor Units 8
• Outdoor Units • R-410A • RYN-E3V1B
4 Capacity tables
4 - 1 Cooling/Heating capacity tables
FTYN60FV1B+RYN60E3V1B
Cooling 50Hz 220-240V
AFR 16.2
BF 0.29
Indoor Outdoor temperature (°CDB)
EWB EDB 20 25 30 32 35 40
(°C) (°C) TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
Heating 50Hz 220-240V AFR 17.4
Indoor Outdoor temperature (°CWB)
EDB -10 -5 0 6 10
(°C) TC PI TC PI TC PI TC PI TC PI
3D051924A
SYMBOLS
AFR: Air flow rate (m
3
/min)
BF: Bypass factor
EWB: Entering wet bulb temp. (°C)
EDB: Entering dry bulb temp. (°C)
TC: Total capacity (kW)
SHC: Sensible heating capacity (kW)
PI: Power input (kW)
NOTES
1 Ratings shown are net capacities which include a deduction for
indoor fan motor heat
2 shows nominal (rated) capacities and power input.
3 TC, PI and SHC must be calculated by interpolation using the figures
in the above tables. (Figures out of the tables should not be used for
calculation.)
4 About SHC which are not mentioned on the table, please calculate
them with around values in direct proportion.
5 Capacities are based on following conditions:
Corresponding refrigerant piping length: 7.5 m
Level difference: 0 m
6 Air flow rate (AFR) and Bypass factor (BF) are taburated above.

• Outdoor Units • R-410A • RYN-E3V1B
1
4
• Split Sky Air • Outdoor Units
9
4 Capacity tables
4 - 1 Cooling/Heating capacity tables
FTYN60F+RYN60E
Cooling 50Hz 220-240V
AFR 16.2
BF 0.29
Indoor Outdoor temperature (°CDB)
EWB EDB 20 25 30 32 35 40
(°C) (°C) TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI TC SHC PI
Heating 50Hz 220-240V AFR 17.4
Indoor Outdoor temperature (°CWB)
EDB -10 -5 0 6 10
(°C) TC PI TC PI TC PI TC PI TC PI
3D051924A
SYMBOLS
AFR: Air flow rate (m
3
/min)
BF: Bypass factor
EWB: Entering wet bulb temp. (°C)
EDB: Entering dry bulb temp. (°C)
TC: Total capacity (kW)
SHC: Sensible heating capacity (kW)
PI: Power input (kW)
NOTES
1 Ratings shown are net capacities which include a deduction for
indoor fan motor heat
2 shows nominal (rated) capacities and power input.
3 TC, PI and SHC must be calculated by interpolation using the figures
in the above tables. (Figures out of the tables should not be used for
calculation.)
4 About SHC which are not mentioned on the table, please calculate
them with around values in direct proportion.
5 Capacities are based on following conditions:
Corresponding refrigerant piping length: 7.5 m
Level difference: 0 m
6 Air flow rate (AFR) and Bypass factor (BF) are taburated above.

3
1
5
• Split Sky Air • Outdoor Units 10
• Outdoor Units • R-410A • RYN-E3V1B
5 Dimensional drawing & centre of gravity
5 - 1 Dimensional drawing
3D051657D
RYN50-60 Eunit (mm)
Minimum space for air passage Wall height on air outlet side =
less than 1200
Drain outlet
(I.D. J15.9 hose for connection)
4 x holes for anchor bolts (M8 or
M10)
Name plate Terminal strip with earth
terminal
Wiring inlet
Gas stop valve
(J12.7 CuT)
Liquid stop valve
(J6.4 CuT)
Service port
Outdoor air temperature
thermistor
Brand name label
In case of removing stop valve
cover